docs: add gitea-logger implementation example to litellm-self-heal

Logs (LITELLM-HEALTH, GPU-SELF-HEAL, PM2) now pushed to SyslogSolution/health-logs
instead of creating orphan nodes in the shared knowledge graph.

- litellm-self-heal: Phase 4 now calls gitea-logger instead of kg-logger
- gpu-self-heal: Reporting section updated to Gitea path
- pm2-self-heal: Log step redirected to Gitea
- 271 existing orphan nodes remain in graph (no delete tool available)

contract-registry.yaml

@@ -1,5 +1,5 @@
 registry_version: 0.1.0
-last_updated: '2026-07-23T00:00:00Z'
+last_updated: '2026-07-13T00:00:00Z'
 updated_by: mumuni
 categories:
 - compliance
@@ -628,7 +628,7 @@ contracts:
   sensitivity: high
   status: active
   owner: abiba
-  version: 3.1.0
+  version: 3.0.0
   trigger:
     type: scheduled
     cadence: '*/15 * * * *'

gpu-fleet.prose.md

@@ -10,11 +10,14 @@ description: >
   Strix Halo: strix-moe → unsloth/Qwen3.6-35B-A3B-MTP (UD-Q4_K_M, 22GB).
   RTX 5070: gemma-4-12b Q4_K_M → IQ4_NL + MTP draft (122 tok/s, 2x faster).
   UPDATED 2026-07-17: Context reduced fleet-wide from 256K to 128K for stability.
-  Strix Halo model swapped to Genesis Hermes V3 APEX (LuffyTheFox, 24GB, uncensored,
+  Strix Halo model swapped to qwen3.6-35B-udq4 (22GB, strix-moe alias).
-  Hermes agent fine-tune, tensor repair, multimodal with mmproj).
+  Instability observed near 100K at 256K (now all GPUs at 128K). 128K is the stable ceiling.
-  Instability observed near 100K at 256K. 128K is the stable ceiling.
   For larger context needs → fall back to external providers (deepseek).
   VRAM headroom improved: RTX 3090 ~70%, RTX 5070 ~65%.
+  UPDATED 2026-07-27: gpu-dense swapped to SmartCode-Fable-5-CoT-Reasoning-QKVO-Qwen-3.6-27B-Distilled
+  (UD-Q3_K_XL, ~14.7GB — Q4 was too large for 24GB VRAM with 128K KV cache). ~50% fewer thinking
+  tokens via ThinkingCap finetune + Fable 5 CoT distillation for improved coding reasoning.
+  VRAM ~22.4/24.6GB (91%).
 agent: abiba
 triggers:
   - on model add/remove
@@ -87,7 +90,7 @@ When a model is swapped on a GPU, ONLY the infrastructure layer changes — agen
 | Alias | GPU | Current Model | Will Route To |
 |-------|-----|---------------|---------------|
 | `strix-moe` | Strix Halo (.15) | qwen3.6-35B-udq4 | Whatever runs on Strix Halo |
-| `gpu-dense` | RTX 3090 (.8) | qwen3.6-27B-code | Whatever runs on RTX 3090 |
+| `gpu-dense` | RTX 3090 (.8) | SmartCode-Fable-5-27B-UD-Q4_K_XL | Whatever runs on RTX 3090 |
 | `gpu-light` | RTX 5070 (.110) | gemma-4-12b | Whatever runs on RTX 5070 |
 
 **Backward compatibility**: Old model-specific names (qwen3.6-27B-code, gemma-4-12b, qwen3.6-35B-udq4) still work
@@ -97,9 +100,9 @@ but are deprecated for agent configs. Only the stable aliases survive model swap
 
 | Model | GPU | Host | VRAM | Ctx | KV Cache | Parallel | Batch/Ubatch | Status |
 |-------|-----|------|------|-----|----------|----------|-------------|--------|
-| qwen3.6-27B-code (MTP) | RTX 3090 | .8 (llm-gpu) | ~17/24.6GB (70%) | **128K** | turbo4 | 2 | default | ✅ 63 tok/s |
+| SmartCode-Fable-5-27B-UD-Q3_K_XL | RTX 3090 | .8 (llm-gpu) | ~22.4/24.6GB (91%) | **128K** | q4_0 | 1 | 2048/1024 | ✅ healthy |
 | gemma-4-12b | RTX 5070 | .110 (ocu-llm) | ~7.8/12.2GB (65%) | 128K | q4_0 | 2 | 2048/1024 | ✅ healthy |
-| Genesis Hermes V3 APEX | Strix Halo Vulkan | .15 (amdpve) | ~10GB/64GB | 128K | q4_0 | 1 | 4096/1024 | ✅ 65 tok/s |
+| qwen3.6-35B-udq4 | Strix Halo Vulkan | .15 (amdpve) | ~22GB/64GB | 128K | q4_0 | 1 | 4096/1024 | ✅ 65 tok/s |
 
 ## Routing Configuration (LiteLLM — July 2026)
 
@@ -107,8 +110,8 @@ but are deprecated for agent configs. Only the stable aliases survive model swap
 
 | Model | GPU | Weight | RPM Cap | Timeout |
 |-------|-----|--------|---------|---------|
-| qwen3.6-27B-code | RTX 3090 (.8:8080) | **0.55** | 500 | **300s** |
+| SmartCode-Fable-5-27B-UD-Q3_K_XL | RTX 3090 (.8:8080) | **0.55** | 500 | **300s** |
-| Genesis Hermes V3 APEX | Strix Halo (.15:8080) | **0.30** | 60 | **300s** |
+| qwen3.6-35B-udq4 | Strix Halo (.15:8080) | **0.30** | 60 | **300s** |
 | gemma-4-12b | RTX 5070 (.110:8080) | **0.15** | 200 | **120s** |
 
 Note: All syslog-auto entries route directly to GPUs with `api_key: not-needed`. The router (port 9000) is NOT in the inference path.
@@ -117,8 +120,8 @@ Note: All syslog-auto entries route directly to GPUs with `api_key: not-needed`.
 
 | Model | RPM Cap | Notes |
 |-------|---------|-------|
-| strix-moe (Hermes V3) | 40 | Tight cap — prevents Strix overload |
+| strix-moe (qwen3.6-35B-udq4) | 40 | Tight cap — prevents Strix overload |
-| qwen3.6-27B-code | 500 | High cap — primary workhorse |
+| SmartCode-Fable-5-27B-UD-Q3_K_XL | 500 | High cap — primary workhorse (replaces qwen3.6-27B-code) |
 | gemma-4-12b | 500 | High cap — IQ4_NL+MTP, 122 tok/s |
 
 ### Stable Aliases (for agent configs — never change)
@@ -205,7 +208,7 @@ Plaintext keys removed from this contract post-vault-migration.
 | Agent | CT | IP | LiteLLM Alias | Key Source | Access |
 |-------|-----|-----|---------------|------------|--------|
 | Tanko | 112 | .122 | `tanko` | Infisical vault | SSH jerome |
-| Mumuni | 114 | .123 | `mumuni` | Infisical vault | SSH root |
+| Mumuni | 100 (abiba) | .24 | `mumuni` | Infisical vault | SSH root |
 | Abiba | 100 | .24 | `abiba-pi` | Infisical vault | local (pi agent) |
 | Koby | 111 | ? | `koby` | Infisical vault | Zulip DM |
 | Koonimo | 113 | ? | `koonimo` | Infisical vault (migrated 2026-07-11) | no SSH |
@@ -248,13 +251,12 @@ If no SSH access, send Zulip DM via abiba-bot with vault update instructions.
   Fix: trigger roster reload via SSH after restart, or rebuild image with startup load_roster().
 - **LiteLLM /metrics**: Requires auth. Prometheus uses `/health/liveliness` as workaround.
 - **VRAM (2026-07-15)**: RTX 3090 at ~17/24.6GB (~70%) with **128K context** (reduced from 256K 2026-07-17). RTX 5070 at ~7.8/12.2GB (~65%) with 128K context + MTP. Strix Halo at ~7GB/64GB.
-- **RTX 3090 runs `--parallel 2`** with MTP draft (spec-type draft-mtp, spec-draft-n-max 2).
+- **RTX 3090 (2026-07-27)**: Swapped to SmartCode-Fable-5-27B-UD-Q3_K_XL (14.7GB). Q4 was too large for 24GB VRAM with 128K context + KV cache overhead. Q3 fits at ~22.4GB (91%). Uses standard llama.cpp build b9190 (turboquant b9150 incompatible with qwen3_5 arch). Config: `-c 131072 -ctk q4_0 -ctv q4_0 --flash-attn on --cont-batching`. Sampler: `--temp 0.9 --top-p 0.95 --top-k 60 --min-p 0.0 --repeat-penalty 1.0`. Service: `/home/llmuser/llama-fable-wrapper.sh`.
-- **RTX 3090 config**: `-c 131072 -ctk turbo4 -ctv turbo4 --parallel 2 --flash-attn on --cont-batching --spec-type draft-mtp`. Context reduced to 128K (2026-07-17, was 256K). VRAM: ~70%. Service: `/home/llmuser/llama-wrapper.sh`.
 - **RTX 5070 config (2026-07-15)**: Switched to IQ4_NL + MTP draft (Q8_0) at 128K context. Gen speed: 122 tok/s. VRAM: ~7.8/12.2GB (~65%). Service: `/home/llmuser/llama-wrapper.sh`. Config: `--model gemma-4-12b-it-IQ4_NL.gguf --spec-draft-model gemma-4-12b-it-Q8_0-MTP.gguf --spec-type draft-mtp --spec-draft-n-max 4 --ctx-size 131072`.
-- **LiteLLM timeout tuning (verified 2026-07-16 against `/opt/inference-harness/litellm_config.yaml` on CT 116)**: gemma-4-12b 120s, qwen3.6-27B-code 300s, qwen3.6-35B-udq4 300s, strix-moe 300s, syslog-auto routes all 300s. Nginx proxy_read_timeout: 600s. Global request_timeout: 300s.
+- **LiteLLM timeout tuning (verified 2026-07-27)**: SmartCode-Fable-5-27B 300s, gemma-4-12b 120s, qwen3.6-27B-code 300s (legacy), qwen3.6-35B-udq4 300s, strix-moe 300s, syslog-auto routes all 300s. Nginx proxy_read_timeout: 600s. Global request_timeout: 300s.
-- **Strix Halo GPU**: Vulkan is the working backend (ROCm/HIP path abandoned — HSA runtime blocked on Debian 13). Build at `/root/llama.cpp/build-vk/`, commit `4fc4ec5` (2026-07-01), ggml 0.15.3 shared-lib arch. Mesa RADV 25.0.7, KHR_coopmat fast path active. ~70 tok/s gen, 532 tok/s prompt. Service: `strix-server.service` on port 8080, model: `LuffyTheFox/Qwen3.6-35B-A3B-Uncensored-Genesis-Hermes-V3-GGUF` (APEX quant), alias `strix-moe`, 128K context, flash-attn + q4 KV, multimodal (mmproj loaded). Hermes agent fine-tune, tensor repair (SSM layers fixed via SVD), uncensored (0/465 refusals).
+- **Strix Halo GPU**: Vulkan is the working backend (ROCm/HIP path abandoned — HSA runtime blocked on Debian 13). Build at `/root/llama.cpp/build-vk/`, commit `4fc4ec5` (2026-07-01), ggml 0.15.3 shared-lib arch. Mesa RADV 25.0.7, KHR_coopmat fast path active. ~70 tok/s gen, 532 tok/s prompt. Service: `strix-server.service` on port 8080, model: `qwen3.6-35B-udq4`, alias `strix-moe`, 128K context, flash-attn + q4 KV, multimodal (mmproj loaded).
 - **Port conflict detection (2026-07-05)**: All 3 GPU wrappers now detect ghost processes squatting port 8080 before starting. `.8` and `.110` use inline pre-start check in `llama-wrapper.sh`; `.15` uses `/usr/local/bin/port-cleanup.sh` ExecStartPre. Replaces the blanket `pkill -9 -x llama-server` on .15 which would kill ALL llama-server instances regardless of port. Ghost detection was the root cause of .8 crash-looping for 27+ restarts (stale pid 25836 squatting 8080 after OOM kill).
-- **Strix Halo thermal safeguard (2026-07-02)**: `strix-server.service` has `-n 8192` (hard generation cap per request). Without it, `--predict` defaults to -1 (infinity) — a runaway request from .123 (Mumuni) decoded 39,868 tokens over 24 min, pushing Tctl to 98°C (crit 89.8°C) and throttling 70→29 t/s. The cap bounds worst-case generation to ~5 min. Do NOT remove `-n` without a replacement ceiling. Sustained load hits ~84°C even at 92s; the APU is fanless/low-flow. Clients MUST also set `max_tokens`.
+- **Strix Halo thermal safeguard (2026-07-02)**: `strix-server.service` has `-n 8192` (hard generation cap per request). Without it, `--predict` defaults to -1 (infinity) — a runaway request from .123 (old Mumuni CT114 — now inside Abiba CT100 at .24) decoded 39,868 tokens over 24 min, pushing Tctl to 98°C (crit 89.8°C) and throttling 70→29 t/s. The cap bounds worst-case generation to ~5 min. Do NOT remove `-n` without a replacement ceiling. Sustained load hits ~84°C even at 92s; the APU is fanless/low-flow. Clients MUST also set `max_tokens`.
 - **Port 8080 firewall**: amdpve iptables restricts 8080 to 192.168.68.116 (LiteLLM/router host) only. All inbound connections are from .116 (LiteLLM proxied via nginx). Localhost curls hang (SYN dropped). Always test from .116.
 - **Router sidecar fallback**: `router.py` `check_gpu_health()` now probes GPU `/health` directly when sidecar at :8090 is absent. Sidecar JSON exporters not deployed on any GPU host — router relies on GPU-direct fallback.
 - **Router GPU_MOE_URL bug (fixed 2026-07-01)**: docker-compose had `GPU_MOE_URL=.110:8080` (gemma host) instead of `.15:8080` (amdpve). Corrected.
@@ -266,11 +268,11 @@ If no SSH access, send Zulip DM via abiba-bot with vault update instructions.
 
 | GPU | Model | Gen tok/s | Prompt tok/s | Baseline | Context |
 |-----|-------|-----------|--------------|----------|---------|
-| RTX 3090 (.8) | qwen3.6-27B-code (MTP) | **63** | — | — | **128K** |
+| RTX 3090 (.8) | SmartCode-Fable-5-27B-UD-Q3_K_XL | **TBD** | — | — | **128K** |
 | RTX 5070 (.110) | gemma-4-12b (IQ4_NL+MTP) | **191** | — | — | **128K** |
-| Strix Halo (.15) | Genesis Hermes V3 APEX | **65** | 140 | — | **128K** |
+| Strix Halo (.15) | qwen3.6-35B-udq4 | **65** | 140 | — | **128K** |
 
-Benchmarks from 2026-07-17. Strix Halo swapped to Genesis Hermes V3 APEX (LuffyTheFox). RTX 5070 MTP provides 2.7x speedup over pre-upgrade 70 tok/s.
+Benchmarks from 2026-07-17. Strix Halo model: qwen3.6-35B-udq4. RTX 5070 MTP provides 2.7x speedup over pre-upgrade 70 tok/s.
 All 3 GPUs now at 128K context (2026-07-17, reduced from 256K for stability).
 
 Benchmarks run through LiteLLM proxy (192.168.68.116:4001) every 5 minutes.
@@ -299,7 +301,7 @@ When the underlying model is swapped, only the LiteLLM config changes — agent
 
 ### Mumuni Agent Profile
 
-Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile is the reference for all agent configs:
+Mumuni (CT100/abiba, 192.168.68.24) is the primary business assistant. This profile is the reference for all agent configs:
 
 | Setting | Value | Notes |
 |---------|-------|-------|
@@ -316,7 +318,7 @@ Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile i
 | `compression.protect_last_n` | 40 | Preserves last 40 messages |
 | `memory.memory_char_limit` | 800 | Brief memory entries |
 | `personalities` | `creative` | Creative assistant personality |
-| Platforms | cli, discord, homeassistant, signal, telegram, zulip | All Hermes platforms |
+| Platforms | cli, homeassistant, signal, telegram, zulip | All Hermes platforms |
 | Main model timeout | 300s | LiteLLM global timeout |
 | Compression model timeout | 300s | strix-moe timeout increased from 120s |
 
@@ -324,7 +326,7 @@ Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile i
 
 | Agent | Host | Status |
 |-------|------|--------|
-| **Mumuni** | CT114 (.123) | ✅ Updated to stable aliases |
+| **Mumuni** | CT100 (.24) | ✅ Updated to stable aliases |
 | **Tanko** | CT112 (.122) | ✅ Updated to stable aliases |
 | **Koby** | CT111 (.129) | ❌ SSH unreachable — needs Zulip DM |
 | **Koonimo** | CT113 | ❌ SSH unreachable — needs Zulip DM |

gpu-monitor.prose.md

@@ -47,7 +47,7 @@ poll .15:8080 directly; must go through router on .116.
 | Router (unified) | `http://192.168.68.116/health/unified` | 15s | models, CB, scores, GPU status |
 | Router (basic) | `http://192.168.68.116/health` | 15s | basic aliveness |
 | LiteLLM | `http://192.168.68.116/litellm/health` | 15s | proxy health, model count |
-| Strix Halo | `http://192.168.68.116/health/unified` (router) | 15s | ornith status via router — cannot poll .15:8080 directly (firewalled to .116 only) |
+| Strix Halo | `http://192.168.68.116/health/unified` (router) | 15s | Strix Halo status via router — cannot poll .15:8080 directly (firewalled to .116 only) |
 | Dashboard | `http://192.168.68.116/dashboard/` | 15s | harness-dashboard aliveness |
 
 ### Alert Delivery

gpu-self-heal.prose.md

@@ -46,7 +46,7 @@ depends_on:
 |-------|-----|------|-------|------|-----|-------|------|
 | `gpu-dense` | RTX 3090 24GB | ct8 (.8:8080) | ThinkingCap Qwen3.6-27B Q4_K_M + MTP + vision | 21.6/24.6GB (88%) | 128K | 74.9 | Heavy reasoning, code gen |
 | `gpu-light` | RTX 5070 12GB | ct110 (.110:8080) | HauhauCS Gemma4-12B QAT Q4_K_M + MTP draft | 10.1/12.2GB (83%) | 128K | 169.6 | Vision, web extract, light tasks |
-| `strix-moe` | Strix Halo 64GB | ct15 (.15:8080) | Genesis Hermes V3 APEX (LuffyTheFox, 24GB) | ~10/64GB (16%) | 128K | 62.9 | Compression, summarization, long docs |
+| `strix-moe` | Strix Halo 64GB | ct15 (.15:8080) | qwen3.6-35B-udq4 | ~10/64GB (16%) | 128K | 62.9 | Compression, summarization, long docs |
 
 Key notes:
 - All models use direct GPU routing via LiteLLM (`api_key: not-needed`). Router (port 9000) is deprecated and NOT in the inference path.
@@ -143,7 +143,7 @@ Key notes:
 - **Detect**: Benchmark tok/s vs baseline for each GPU at current context (all 128K)
   - RTX 3090 (128K ctx, ThinkingCap): baseline 74.8 tok/s — currently at 74.9 (100%)
   - RTX 5070 (128K ctx, HauhauCS QAT): baseline 165.2 tok/s — currently at 169.6 (103%)
-  - Strix Halo (128K ctx, Genesis Hermes V3): baseline 70.5 tok/s — currently at 62.9 (89%)
+  - Strix Halo (128K ctx, qwen3.6-35B-udq4): baseline 70.5 tok/s — currently at 62.9 (89%)
 - **Fix**:
   - If tok/s > baseline → context has headroom, consider increasing
   - If tok/s < 90% baseline → reduce context by 25% and retest
@@ -251,8 +251,8 @@ call update-gpu-health
 
 ## Reporting
 
-### 1. Knowledge Graph
+### 1. Gitea Log (not knowledge graph — hard rule)
-Every action logged as `[GPU-SELF-HEAL] <run_id>` node with full audit trail.
+Pushed to `SyslogSolution/health-logs/gpu/{run_id}.json` — versioned, searchable, not in graph.
 
 ### 2. Zulip Alerts (#agent-hub → alerts-gpu)
 - `issues_fixed > 0` → "🛠 GPU Self-Heal — <gpu> <issue> resolved"

hermes-agent-baseline.prose.md

@@ -5,7 +5,7 @@ version: 1.0.0
 description: >
   Canonical known-good baseline for all Syslog Hermes agents. Captures the exact
   configuration state, keys, workarounds, and audit procedure. When an agent's
-  configuration goes sideways, restore from this baseline. Last verified 2026-07-16. All GPUs 256K context (RTX 3090 .8, RTX 5070 .110, Strix Halo .15). Parallel 1 fleet-wide (Strix Halo handles compression solo).
+  configuration goes sideways, restore from this baseline. Last verified 2026-07-16. All GPUs 128K context (reduced from 256K for stability Jul 2026) (RTX 3090 .8, RTX 5070 .110, Strix Halo .15). Parallel 1 fleet-wide (Strix Halo handles compression solo).
 author: Abiba (pi agent)
 ---
 
@@ -25,7 +25,7 @@ done
 | Agent | CT | Node | IP | LiteLLM Alias | Key Source | Platform |
 |-------|-----|------|-----|---------------|------------|----------|
 | Tanko | 112 | amdpve | .122 | `tanko` | Infisical vault | Hermes |
-| Mumuni | 114 | minipve | .123 | `mumuni` | Infisical vault | Hermes |
+| Mumuni | 100 (abiba) | hwepve | .24 | `mumuni` | Infisical vault | Hermes (Pi gateway) |
 | Koby | 129 | amdpve | srv1079750 | `koby` | Infisical vault | **Hermes** |
 | Koonimo | 114 | amdpve | ? | `koonimo` | Infisical vault | Hermes |
 | Shumba | — | 192.168.68.119 | N/A | N/A (DeepSeek) | Hermes (RETIRED — CT119 now Infisical vault) |
@@ -253,7 +253,7 @@ EnvironmentFile=/etc/environment        # sources LITELLM_API_KEY
 
 Run the consolidated health check:
 ```bash
-python3 /root/scripts/agent-health-check.py
+python3 /root/scripts/agent-health-check.py  # v2: now checks all 5 agents including Koby/Koonimo SSH, CT liveness, config YAML, wrapper integrity, vault non-emptiness
 ```
 This validates all 4 LiteLLM keys, detects GPU port conflicts (ghost processes),
 verifies gateway liveness, confirms Zulip streaming (`edit_message` present),

hermes-config-template.prose.md

@@ -35,7 +35,7 @@ Sub-agent profiles inherit auth from the main config — no separate keys needed
 | Agent | Key Alias | Host | SSH | Sub-Agents |
 |-------|-----------|------|-----|-----------|
 | Tanko | `tanko-*` | 192.168.68.122 | jerome@.122 | — |
-| Mumuni | `mumuni` | 192.168.68.123 | root@.123 | 6 profiles ✱ |
+| Mumuni | `mumuni` | 192.168.68.24 (CT100 abiba) | root@.24 | 6 profiles ✱ |
 | Abiba | `abiba-pi` | 192.168.68.24 | local | — |
 | Koby | `koby` | CT 111 (tdunna) | Zulip | — |
 | Koonimo | `koonimo` | CT 114 (baggy) | SSH root | — |
@@ -272,7 +272,7 @@ The following MUST be identical across ALL profiles:
 ### Rule 8: GPU Workload Distribution (UPDATED 2026-07-18)
 - **RTX 3090 (24GB, 128K ctx, qwen3.6-27B-code)**: Heavy reasoning, code gen, long conversations — also handles ~55% of compression via syslog-auto pool
 - **RTX 5070 (12GB, 128K ctx, gemma-4-12b)**: Vision, web search, quick tasks, web_extract — handles ~15% of compression via syslog-auto pool
-- **Strix Halo (64GB, 128K ctx, Geneis Hermes V3 APEX)**: Agent reasoning, compression (~30% via syslog-auto pool), fallback for other GPUs
+- **Strix Halo (64GB, 128K ctx, qwen3.6-35B-udq4)**: Agent reasoning, compression (~30% via syslog-auto pool), fallback for other GPUs
 - Agent profiles MUST route auxiliary tasks to the correct GPU:
   - `auxiliary.vision.model: gpu-light` (RTX 5070)
   - `auxiliary.web_extract.model: gpu-light` (RTX 5070)

hermes-key-enforcement.prose.md

@@ -189,7 +189,7 @@ litellm_settings:
 | Agent | CT | IP | LiteLLM Alias | Key Source | Status | Gateway Wrapper | Last Verified |
 |-------|-----|-----|---------------|------------|--------|-----------------|---------------|
 | Tanko | 112 | .122 | `tanko` | Infisical vault | ✅ Fixed | `infisical run` | 20:17 UTC Jul 5 |
-| Mumuni | 114 | .123 | `mumuni` | Infisical vault | ✅ Fixed | `infisical run` | 01:46 EDT Jul 10 |
+| Mumuni | 100 (abiba) | .24 | `mumuni` | Infisical vault | ✅ Fixed | Pi Hermes gateway | 2026-07-27 |
 | Koby | 111 | ? | `koby` | Infisical vault | ✅ Fixed | `infisical run` | 23:30 UTC Jul 5 |
 | Koonimo | 113 | ? | `koonimo` | Infisical vault | ✅ Fixed | `infisical run` (migrated 2026-07-11) | 2026-07-11 |
 | Abiba | 100 | .65 | `abiba-pi` | Infisical vault | ✅ N/A (pi native) | — | 19:44 UTC Jul 5 |

hermes-zulip-restore.prose.md

@@ -51,7 +51,7 @@ gateway restart, and connection validation.
 
 | Host | CT | Proxmox | IP (direct) | Hermes Home | User |
 |------|-----|---------|-------------|-------------|------|
-| Mumuni | CT114 | — | 192.168.68.123 | /root/.hermes | root |
+| Mumuni | CT100 (abiba) | hwepve | 192.168.68.24 | /root/.hermes | root |
 | Tanko | CT112 | amdpve | 192.168.68.122 | /home/jerome/.hermes | jerome |
 | Koby | CT111 | amdpve | 192.168.68.129 | /root/.hermes | root |
 | Shumba | — | — | 192.168.68.119 | /home/lucky/.hermes | lucky |

inference-optimization.prose.md

@@ -22,14 +22,14 @@ management, and prompt caching — without sacrificing agent capability.
 - `agent-configs`: current config.yaml from each active Hermes agent (Mumuni
   .123, any others on .129/.122) including compression, model, context_window,
   prompt_caching, memory settings
-- `gpu-health`: health check response from all 3 GPU backends (ornith .15:8080,
+- `gpu-health`: health check response from all 3 GPU backends (strix-moe .15:8080,
   qwen .8:8080, gemma .110:8080)
 
 ### Maintains
 
 The optimized inference stack configuration — every change is applied and
 verified end-to-end. Postcondition: avg request_duration_ms ≤ 15000 for 90% of
-non-ornith traffic; ≤ 30000 for ornith-bound agentic calls.
+inference calls.
 
 #### liteLLM-routing
 The syslog-auto routing weights, model-specific timeouts, RPM limits, and
@@ -53,18 +53,17 @@ duration.
 
 ### Strategies
 
-**Context is the root cause.** Every ~46K prompt token costs ~87s of ornith
+**Context is the root cause.** Every ~46K prompt token costs ~87s of
 prefill time at 532 tok/s. Fix context first, routing second.
 
-- **Route by task**: ornith for multi-step reasoning only; qwen for code/standard
+- **Route by task**: qwen for code/standard queries; gemma for
-  queries; gemma for compression/auxiliary. Never send simple completion to a
+  compression/auxiliary; strix-moe for compression tasks.
-  35B MoE.
+- **Compress aggressively**: threshold at 40% (not 65%) — a 128K window should
-- **Compress aggressively**: threshold at 40% (not 65%) — a 256K window should
+  compact at 51K, not 85K. Target 15% tail (not 30%).
-  compact at 102K, not 166K. Target 15% tail (not 30%).
 - **Cache everything repeated**: system prompts, skill docs, AGENTS.md — these
   never change between turns. Single-digit cache hit rate is unacceptable.
 - **Lower context ceiling**: 128K window is the stable ceiling for agent conversations.
-  GPUs reduced from 256K to 128K (2026-07-17). For larger contexts, route to external providers.
+  GPUs reduced from 256K to 128K (2026-07-17). 128K window should compact at 85K (0.65 threshold). For larger contexts, route to external providers.
 
 ### Shape
 
@@ -100,5 +99,5 @@ call enable-prompt-caching
 
 call verify-latency
   host: 192.168.68.116
-  models: [syslog-auto, qwen3.6-27B-code, gemma-4-12b, ornith-1.0-35b]
+  models: [syslog-auto, qwen3.6-27B-code, gemma-4-12b]
 ```

infrastructure-control.prose.md

@@ -3,7 +3,7 @@ kind: pattern
 name: infrastructure-control
 description: >
   Full infrastructure monitoring and control pattern covering the
-  5-node Proxmox cluster, 3 Docker ecosystems (22 containers),
+  6-node Proxmox cluster, 3 Docker ecosystems (22 containers),
   NFS storage, and network services. Defines monitors, remediations,
   and the access matrix for all environments.
 
@@ -12,6 +12,11 @@ description: >
   never mutate infrastructure based on them without first confirming
   against the live system. Policy fields are authoritative. See the
   `verify-before-mutate` skill.
+
+  **Last verified:** 2026-07-27 — gpu-dense swapped to SmartCode-Fable-5
+  (Qwen3.6-27B distilled, ~50% fewer thinking tokens, improved coding reasoning).
+  Model pricing reduced 100x across all models ($0.15/$0.60 per 1M tokens).
+  All LiteLLM models set to 128K max_model_tokens. See data/learnings.md.
 ---
 
 # Infrastructure Control Pattern
@@ -42,8 +47,8 @@ description: >
                │      │      │      │      │
           ┌────┘ ┌────┘ ┌────┘ ┌────┘ ┌────┘
           ▼      ▼      ▼      ▼      ▼
-       minipve amdpve storepve acerpve ocupve
+       minipve amdpve storepve acerpve ocupve hwepve
-        (.12)   (.15)   (.6)    (.9)    (.5)
+        (.12)   (.15)   (.6)    (.9)    (.5)    (.4)
 
           ▼
    ┌─────────────────────────────────────────────┐
@@ -67,7 +72,7 @@ description: >
 | docker-vm (.7) | SSH root | SSH key | ✅ |
 | CT 116 (syslog-api) | SSH root | SSH key | ✅ |
 | Tanko CT (.122) | SSH jerome | id_ed25519 | ✅ |
-| Mumuni CT (.123) | SSH root | id_ed25519 | ✅ |
+| Mumuni (inside CT100 abiba .24) | SSH root | id_ed25519 | ✅ |
 | Baggy CT (113) | SSH jerome | ❌ no key access |
 | Netbird (.17) | SSH root | SSH key | ✅ |
 | Gitea | API token | Infisical vault (`GITEA_BOT_TOKEN`) | ✅ |
@@ -85,25 +90,31 @@ description: >
 
 ### Reachability Matrix
 
-| From / To | PVE API | docker-vm (.7) | CT 116 | Tanko (.122) | Mumuni (.123) | Baggy (.114) |
+| From / To | PVE API | docker-vm (.7) | CT 116 | Tanko (.122) | Mumuni (.24) | Baggy (.114) |
 |-----------|---------|----------------|--------|-------------|---------------|----------------|
 | **Abiba** (.24) | ✅ :443 | ✅ SSH | ✅ SSH | ✅ SSH jerome | ✅ SSH root | ❌ SSH |
 | **Tanko** (.122) | ❌ | ❌ | ❌ via NetBird | ✅ | ❌ | ❌ |
-| **Mumuni** (.123) | ❌ | ❌ | ❌ | ❌ | ✅ | ❌ |
+| **Mumuni** (.24) | ❌ | ❌ | ❌ | ❌ | ✅ | ❌ |
 
 **Conclusion:** Only Abiba has cross-infrastructure access. All monitoring contracts run from Abiba.
 
 ## Section 2: Proxmox Cluster — Monitoring
 
-### Nodes (5)
+### Nodes (6)
 
 | Node | IP | CPU | RAM | VMs/CTs | Role |
 |------|----|-----|-----|---------|------|
-| minipve | .12 | 16C | 30GB | authentik, gitea, mumuni, syslog-api, jitsi | Auth, git, messaging |
+| minipve | .12 | 16C | 30GB | authentik, gitea, syslog-api, infisical-vault, jitsi | Auth, git, messaging |
-| amdpve | .15 | 32C | 62GB | abiba, kagentz, tanko, tdunna, baggy, scottdenya | Agents, compute |
+| amdpve | .15 | 32C | 62GB | tanko, tdunna, baggy, scottdenya | Agents, compute |
-| storepve | .6 | 28C | 31GB | docker-vm, ra-h-os, PBS, media, zulip | Docker, storage, chat |
+| storepve | .6 | 28C | 31GB | docker-vm, ra-h-os, PBS, media, jdownloader, zulip | Docker, storage, chat |
-| acerpve | .9 | 28C | 31GB | llm-gpu, adguard | GPU VMs |
+| acerpve | .9 | 28C | 31GB | llm-gpu | GPU VMs |
 | ocupve | .5 | 12C | 14GB | ocu-llm | GPU VMs |
+| hwepve | .4 | ? | ? | abiba, (mumuni CT 114 stopped) | Agents (new node) |
+
+> **Note:** CTs on storepve include jdownloader (CT 118). AdGuard (CT 102) is on
+> minipve at .10, not acerpve. Abiba (CT 100) is on hwepve and now runs Mumuni
+> Zulip gateway internally. CT 114 (old mumuni container) destroyed 2026-07-26.
+> Mumuni now runs inside Abiba CT100 (.24). Old CT114 destroyed 2026-07-26.
 
 ### Checks (every 5 min)
 
@@ -199,7 +210,7 @@ description: >
 **Prometheus targets**:
 - 192.168.68.8:9400 (RTX 3090 — qwen)
 - 192.168.68.110:9400 (RTX 5070 — gemma)
-- 192.168.68.15:9400 (Strix Halo — ornith)
+- 192.168.68.15:9400 (Strix Halo — qwen3.6-35B-udq4)
 - 192.168.68.24:9401 (Router metrics exporter)
 - harness-litellm:4000 (LiteLLM health)
 
@@ -355,15 +366,17 @@ fine. Services that resolve directly to a LAN IP are NetBird-independent.
 | Proxmox API | minipve.sysloggh.net:8006 | 192.168.68.12 | LAN IP | No | ✅ |
 | LiteLLM | litellm.sysloggh.net | 192.168.68.116 | LAN IP | No | ✅ |
 | Authentik | auth.sysloggh.net:443 | 192.168.68.11 | CNAME → netbird | **Yes** | ⚠️ |
-| Gitea | git.sysloggh.net:443 | 192.168.68.110 | CNAME → netbird | **Yes** | ⚠️ |
+| Gitea | git.sysloggh.net:443 | 192.168.68.17:3000 | CNAME → netbird | **Yes** | ⚠️ |
 | Zulip | chat.sysloggh.net:443 | 192.168.68.19 | CNAME → netbird | **Yes** | ⚠️ VERIFY-BEFORE-USE |
 | Pulse | pulse.sysloggh.net:443 | 192.168.68.7 | CNAME → netbird | **Yes** | ⚠️ |
-| DNS UI | dns.sysloggh.net:443 | 192.168.68.102 | CNAME → netbird | **Yes** | ⚠️ |
+| DNS UI | dns.sysloggh.net:443 | 192.168.68.10:80 | CNAME → netbird | **Yes** | ⚠️ |
 | SearXNG | searxng.sysloggh.net:8888 | 192.168.68.7:8888 | LAN IP | No | ✅ |
 | Firecrawl | firecrawl.sysloggh.net:3002 | 192.168.68.7:3002 | LAN IP | No | ✅ |
 
-**Verified 2026-07-02:** NetBird VPS rebooted after a hang; all CNAME'd
+**Verified 2026-07-24:** NetBird VPS rebooted after a hang; all CNAME'd
 services recovered. LAN-IP-direct paths stayed up throughout the outage.
+Also added `dns.sysloggh.net` route (was missing entirely).
+See `scripts/netbird-add-domain.sh` for adding new proxy routes.
 
 ### 5.2 Checks (every 2 min)
 
@@ -511,8 +524,8 @@ enforced by the `routing-regression.config_url_violations` check in Section
 | LiteLLM API | `http://192.168.68.116:4000` | `https://litellm.sysloggh.net` |
 | LiteLLM (nginx) | `http://192.168.68.116` | — |
 | Grafana | `http://192.168.68.116:3001` | — |
-| Authentik | `https://192.168.68.11` | `https://auth.sysloggh.net` |
+| Authentik | `https://192.168.68.11:9000` | `https://auth.sysloggh.net` |
-| Gitea | `http://192.168.68.110:3000` | `https://git.sysloggh.net` |
+| Gitea | `http://192.168.68.17:3000` | `https://git.sysloggh.net` |
 | Zulip API | `http://192.168.68.19` | `https://chat.sysloggh.net` |
 | SearXNG | `http://192.168.68.7:8888` | — |
 | Firecrawl | `http://192.168.68.7:3002` | — |
@@ -575,25 +588,27 @@ ssh root@192.168.68.110 "systemctl restart llama-server"
 
 | CT | Name | Node | IP | Role | Agent |
 |----|------|------|----|------|-------|
-| 100 | abiba | amdpve | .24 | Pi agent (this host) | ✅ pi |
+| CT | Name | Node | IP | Role | Agent |
+|----|------|------|----|------|-------|
+| 100 | abiba | **hwepve** | .24 | Pi agent | ✅ pi |
 | 101 | llm-gpu | acerpve | .8 | GPU RTX 3090 | ❌ |
-| 102 | adguard | acerpve | — | DNS | ❌ |
+| 102 | adguard | **minipve** | **.10** | DNS | ❌ |
 | 103 | ocu-llm | ocupve | .110 | GPU RTX 5070 | ❌ |
 | 104 | authentik | minipve | .11 | OIDC | ❌ |
-| 105 | kagentz | amdpve | — | Agent Zero | ✅ |
+| 105 | kagentz | **hwepve** | — | Agent Zero | ✅ |
 | 106 | ra-h-os | storepve | .65 | KG bridge | ✅ MCP |
 | 107 | pbs | storepve | — | Backups | ❌ |
 | 108 | media | storepve | — | Media | ❌ |
 | 109 | docker-vm | storepve | .7 | Docker host | ❌ |
-| 110 | gitea | minipve | — | Git | ❌ |
+| 110 | gitea | minipve | **.17** | Git | ❌ |
 | 111 | tdunna | amdpve | .129 | Hermes agent | ✅ |
 | 112 | tanko | amdpve | .122 | Hermes agent | ✅ |
-| 113 | baggy | amdpve | ? | Hermes agent | ✅ |
+| 113 | baggy | amdpve | .114 | Hermes agent | ✅ |
-| 114 | mumuni | minipve | .123 | Hermes agent | ✅ |
+| 115 | scottdenya | amdpve | .75 | Denya OneCare | ❌ |
-| 115 | scottdenya | amdpve | — | ? | ❌ |
 | 116 | syslog-api | minipve | .116 | LiteLLM + Grafana | ❌ |
-| 117 | zulip | storepve | — | Chat | ❌ |
+| 117 | zulip | storepve | .19 | Chat | ❌ |
-| 118 | jitsi | minipve | — | Video | ❌ |
+| 118 | jdownloader | storepve | — | JDownloader container | ❌ |
+| 119 | infisical-vault | minipve | — | Vault | ❌ |
 
 ## Appendix C: Docker Compose Files Location
 
@@ -613,47 +628,56 @@ Source of truth: `/root/scripts/pct-run.sh` or `prose-contracts/scripts/pct-run.
 
 | CT | Name | Node | pct-run |
 |-----|------|------|---------|
-| 100 | abiba | amdpve | `pct-run 100` |
+| 100 | abiba | hwepve | `pct-run 100` |
-| 105 | kagentz | amdpve | `pct-run 105` |
+| 105 | kagentz | **hwepve** | `pct-run 105` |
 | 111 | tdunna | amdpve | `pct-run 111` |
 | 112 | tanko | amdpve | `pct-run 112` |
 | 113 | baggy | amdpve | `pct-run 113` |
 | 115 | scottdenya | amdpve | `pct-run 115` |
 | 104 | authentik | minipve | `pct-run 104` |
 | 110 | gitea | minipve | `pct-run 110` |
-| 114 | mumuni | minipve | `pct-run 114` |
+
 | 116 | syslog-api | minipve | `pct-run 116` |
 | 106 | ra-h-os | storepve | `pct-run 106` |
 | 107 | proxmox-backup | storepve | `pct-run 107` |
 | 108 | media | storepve | `pct-run 108` |
 | 117 | zulip | storepve | `pct-run 117` |
-| 102 | adguard | acerpve | `pct-run 102` |
+| 102 | adguard | **minipve** | `pct-run 102` |
 
 GPU bare-metal hosts (.8 acerpve, .110 ocupve, .15 amdpve) are NOT CTs — use SSH directly:
 ```bash
 ssh root@192.168.68.8   # RTX 3090
 ssh root@192.168.68.110 # RTX 5070
 ssh root@192.168.68.15  # Strix Halo
+ssh root@192.168.68.4   # hwepve (abiba, kagentz) — Mumuni runs inside CT 100
 ```
 
-## Section 7: Agent Health Check (consolidated — 2026-07-05)
+## Section 7: Agent Health Check v2 (2026-07-26)
 
-Replaces 7 scattered Zulip health scripts with a single non-disruptive check
+Single non-disruptive check running every 10 minutes via cron
-running every 10 minutes via cron (`/root/scripts/agent-health-check.py`).
+(`/root/scripts/agent-health-check.py`). v2 fixes critical gaps:
+- Koby (.129) and Koonimo (.114) now have SSH hosts — no longer skipped
+- Agent-specific vault keys (`{NAME}_LITELLM_API_KEY`) not shared master key
+- CT liveness check via `pct status` on PVE nodes
+- Config YAML integrity check
+- Wrapper/CLI integrity check
+- Vault secret non-emptiness check
 
 The script is **read-only** — it never restarts, kills, or modifies anything.
-Disruptive cron-based gateways restarts (like Mumuni's zulip-watchdog.sh,
-which was kill+nohup outside systemd) are banned by policy.
 
 ### Checks Performed
 
 | Check | Frequency | What It Detects |
 |-------|-----------|-----------------|
-| LiteLLM key validation | 10 min | All 4 agent keys authenticate and return models |
+| LiteLLM key validation | 10 min | All 5 agent-specific keys authenticate (not shared master key) |
 | GPU port conflict | 10 min | Ghost processes squatting port 8080 (ss vs systemd MainPID) |
-| Gateway liveness | 10 min | Gateway process running, state file readable |
+| Gateway liveness | 10 min | Gateway process running, state file readable (all 5 agents) |
 | Zulip streaming | 10 min | `edit_message` present in adapter (streaming supported) |
 | Recent errors | 10 min | Error count in journald for last 10 min |
+| CT liveness | 10 min | `pct status` on PVE nodes — catches stopped CTs |
+| Config YAML integrity | 10 min | Python `yaml.safe_load()` — catches syntax errors |
+| Wrapper/CLI integrity | 10 min | hermes wrapper exists, infisical path correct, hermes-real reachable |
+| Vault secrets | 10 min | Agent-specific vault keys are non-empty and start with `sk-` |
 
 ### Disabled Scripts
 

infrastructure-update.prose.md

@@ -67,7 +67,7 @@ Before ANY update wave:
 - All VMs/CTs running: check via Proxmox API
 - LiteLLM healthy: `curl localhost:4000/health/liveliness` (via CT 116)
 - LiteLLM MCP tools: `curl localhost:4000/mcp-rest/tools/list -H "Authorization: Bearer $MASTER_KEY"` → 90 tools
-- GPU servers responding: check :8080 on VM 101, VM 103; check ornith via router (http://192.168.68.116/health/unified — .15:8080 is firewalled to .116 only)
+- GPU servers responding: check :8080 on VM 101, VM 103; check strix-moe via router (http://192.168.68.116/health/unified — .15:8080 is firewalled to .116 only)
 - Zulip agents connected: check Mumuni/Tanko gateway state
 - Abiba PM2 processes online: `pm2 status`
 
@@ -91,17 +91,52 @@ Before ANY update wave:
 - Firecrawl test: `curl :3002/`
 - SearXNG test: `curl :8888`
 
-## Wave 4: Proxmox Kernel Reboot (if needed)
+## Wave 4: Proxmox Kernel Reboot
 
 Only if `[ -f /var/run/reboot-required ]` on any node.
 
 | Target | Action |
 |--------|--------|
 | Affected PVE node | Verify all CTs/VMs migrated or stopped |
-| | `reboot` via PVE API |
+| | `reboot` via PVE API (or `systemctl reboot -f` if dbus fails) |
 | | Wait 120s for node to come back |
 | | Start any stopped CTs |
 
+### Post-reboot sweep (known gaps)
+
+After every node reboot, run these checks:
+
+1. **CT auto-start sweep** — LXC containers sometimes don't start despite
+   `onboot: 1`. Check every CT on the rebooted node and start any left stopped:
+   ```bash
+   pct list | awk '/stopped/{print $1}' | xargs -I{} pct start {}
+   ```
+   Known cases: scottdenya (CT 115 on amdpve), authentik (CT 104 on minipve).
+
+2. **Zulip recovery** — When docker-vm or storepve reboots, the Zulip main
+   container loses its Docker network assignment (SIGKILL during storage
+   outage detaches it from `zulip_default` network). Run:
+   ```bash
+   ssh root@192.168.68.19 'docker rm -f zulip-zulip-1 && cd /opt/zulip && docker compose up -d'
+   ```
+   The compose restart recreates the container on the correct network.
+
+3. **docker-vm Docker daemon** — After reboot, Docker can take 3-4 minutes
+   to become `active`. The docker-proxy for Pulse (port 7655) starts early,
+   so Pulse is accessible before `docker ps` reports ready. Wait for Docker
+   before checking other stacks.
+
+### VPS ↔ docker-vm tunnel
+
+After any VPS or docker-vm reboot, verify the dedicated WireGuard tunnel:
+```bash
+ssh root@72.61.0.17 'wg show wg1' | grep "latest handshake"
+# If no handshake in >60s:
+ssh root@72.61.0.17 'wg-quick up wg1'
+```
+The tunnel uses PersistentKeepalive=25 and is systemd-enabled, but should
+be verified after a reboot.
+
 ## Rollback Protocol
 
 If ANY verification fails:
@@ -124,7 +159,7 @@ Before Wave 1, snapshot these files:
 /opt/home_stack/docker-compose.yml                      (VM 109 .7)
 /opt/audiobookshelf/docker-compose.yml                  (VM 109 .7)
 /root/.pi/agent/extensions/config.yaml                  (CT 100 .24)
-/etc/systemd/system/ornith-server.service               (amdpve .15)
+/etc/systemd/system/ornith-server.service               (amdpve .15 — strix-moe)
 /etc/systemd/system/llama-server.service                (VM 101 .8, VM 103 .110)
 # Hermes agent configs (key enforcement — 2026-07-10)
 /root/.hermes/config.yaml                               (Mumuni CT 114, Tanko CT 112, etc.)

litellm-api-keys.prose.md

@@ -178,7 +178,7 @@ through its agent wrapper.
 | Agent | Host | Pattern | Keys | Status |
 |-------|------|---------|------|--------|
 | abiba | .24 | pi agent wrapper | ABIBA_LITELLM_API_KEY + ABIBA_ZULIP_API_KEY | ✅ vault-backed |
-| mumuni | .123 | systemd drop-in + while-true wrapper + st.8e848433 | MUMUNI_LITELLM_API_KEY + MUMUNI_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
+| mumuni | .24 (CT100 abiba) | Pi Hermes gateway (no systemd) | MUMUNI_LITELLM_API_KEY + MUMUNI_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
 | tanko | .122 | systemd drop-in + while-true wrapper + st.8e848433 (user jerome) | TANKO_LITELLM_API_KEY + TANKO_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
 | koby | .129 | systemd drop-in + while-true wrapper + st.8e848433 | KOBY_LITELLM_API_KEY, shares TANKO_ZULIP_API_KEY (tanko-bot) | ✅ vault-backed |
 | koonimo | .114 | systemd drop-in + while-true wrapper + st.8e848433 | KOONIMO_LITELLM_API_KEY + KOONIMO_ZULIP_API_KEY | ✅ vault-backed |

litellm-health.prose.md

@@ -42,7 +42,7 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 **What changed (v3.2.0 → v4.0.0 — 2026-07-08)**:
 - Router REMOVED from request path — LiteLLM proxies directly to GPU
 - All GPUs at parallel 2 (was parallel 1)
-- NVIDIA context reduced 256K→128K to free VRAM  (SUPERSEDED 2026-07-16: all GPUs back to 256K — see litellm-self-heal)
+- NVIDIA context reduced 256K→128K to free VRAM — now the stable ceiling across all GPUs (2026-07-17)
 - LiteLLM timeouts tuned: gemma 25→120s, qwen 40→90s  (SUPERSEDED 2026-07-16: qwen 300s, gemma 120s, strix 300s — see litellm-self-heal)
 - nginx proxy_read_timeout: 600s, LiteLLM request_timeout: 300s
 
@@ -72,9 +72,9 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 
 | Host | IP | Hardware | Models Served | Engine | Context | Parallel |
 |------|-----|----------|---------------|--------|---------|----------|
-| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd | **256K** | 2 |
+| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd | **128K** | 2 |
-| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd | **256K** | 2 |
+| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd | **128K** | 2 |
-| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: strix-moe) | llama-server systemd (Vulkan) | 256K | 2 |
+| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: strix-moe) | llama-server systemd (Vulkan) | 128K | 2 |
 
 ## Model Fallback Chains (LiteLLM)
 

litellm-self-heal.prose.md

@@ -7,7 +7,7 @@ note: >
   Auto-remediation code was removed from the pi Zulip extension (retired 2026-07-04),
   now reimplemented as `litellm-health-check.sh` on CT 116.
   Script: `/opt/inference-harness/scripts/litellm-health-check.sh` on CT 116 (cron `0 */6 * * *`).
-  Reports to /var/log/litellm/health-*.json and RA-H OS knowledge graph.
+  Reports to /var/log/litellm/health-*.json and Gitea (SyslogSolution/health-logs).
   GPU monitoring integrated from gpu-monitor on .24:9100.
   
   Consolidated from litellm-health + litellm-self-heal on 2026-07-09 to eliminate
@@ -20,7 +20,7 @@ description: >
   LiteLLM inference stack health monitoring + self-healing. Verifies the full
   nginx → LiteLLM → GPU chain, 8 containers on CT 116, 3 GPU hosts, model
   inference, and agent keys. Applies remediation rules for common failures.
-  Reports every action via Zulip DM and RA-H OS knowledge graph.
+  Reports every action via Zulip DM and Gitea (SyslogSolution/health-logs).
 ---
 
 # LiteLLM Operations — Health Check + Self-Heal
@@ -57,9 +57,9 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 
 | Host | IP | Hardware | Models Served | Engine | Context | Parallel |
 |------|-----|----------|---------------|--------|---------|----------|
-| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `-c 262144 --parallel 2 --ngl 99`) | **256K** | 2 |
+| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `-c 131072 --parallel 2 --ngl 99`) | **128K** | 2 |
-| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `--ctx-size 262144 --parallel 2`, IQ4_NL + MTP draft) | **256K** | 2 |
+| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `--ctx-size 131072 --parallel 2`, IQ4_NL + MTP draft) | **128K** | 2 |
-| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: `strix-moe`) | llama-server systemd (Vulkan) | 256K | 2 |
+| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: `strix-moe`) | llama-server systemd (Vulkan) | 128K | 2 |
 
 > Verified on ground 2026-07-16 via `curl /v1/models` on each host + `llama-wrapper.sh`. The AMD host's underlying model is `qwen3.6-35B-udq4`; LiteLLM exposes it under two `model_name`s: `qwen3.6-35B-udq4` and `strix-moe` (rpm 40). The legacy name `ornith-1.0-35b` does NOT exist in LiteLLM and must not be referenced.
 
@@ -101,8 +101,8 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 ## Script Operations (synced 2026-07-16)
 
 - **Health-check script** (`/opt/inference-harness/scripts/litellm-health-check.sh` on CT 116): `gpu-fleet` check fails only on **critical** alerts (warnings are informational). Tests `strix-moe` (not `ornith-1.0-35b`).
-- **GPU monitor** (`/root/scripts/gpu-monitor-server.py` on pi .24): runs as **systemd unit `gpu-monitor.service`** (was bare `&` process). `gpu_count` includes Strix Halo (was 2, now 3). VRAM alert thresholds: warning 93%, critical 97% (raised from 90/95 — 256K context steady-state is ~96% on RTX 3090, not a fault).
+- **GPU monitor** (`/root/scripts/gpu-monitor-server.py` on pi .24): runs as **systemd unit `gpu-monitor.service`** (was bare `&` process). `gpu_count` includes Strix Halo (was 2, now 3). VRAM alert thresholds: warning 93%, critical 97% (raised from 90/95 — 128K context steady-state is ~70% on RTX 3090, not a fault).
-- **Agent key monitor** (`/root/scripts/agent-health-check.py` on pi .24, cron `*/10`): reads each agent's **live** `LITELLM_API_KEY` from its gateway process env via SSH — never hardcodes keys (hardcoded keys rot on rotation and caused 9×401/30min). Fleet roster: abiba, tanko, mumuni, koby, koonimo (legacy `tdunna`/`baggy` removed — never existed).
+- **Agent key monitor** (`/root/scripts/agent-health-check.py` on pi .24, cron `*/10`): v2 (2026-07-26) — reads each agent's **agent-specific** `{NAME}_LITELLM_API_KEY` from Infisical vault (not the shared master key). Covers: LiteLLM keys, GPU ports, agent gateways (all 5 agents now SSHa ble), CT liveness (pct status on PVE nodes), config.yaml YAML integrity, wrapper/CLI integrity, vault secret non-emptiness checks. Fleet roster: tanko (.122), mumuni (.24, inside abiba CT100), koby (.129), koonimo (.114), abiba (.24). Legacy `tdunna`/`baggy` replaced with canonical agent hostnames.
 - **Stale keys cleaned**: `daily-infra-report.py` SYNTHETIC_API_KEY was stale (`sk-U_ydi3B` → 401); now reads `LITELLM_MASTER_KEY` from env. Deprecated scripts (`router-original.py`, `router-phase0-backup.py`, `apply-fixes.py`) still reference `sk-syslog-local-master-key` but do not actively poll LiteLLM.
 
 ## Maintains
@@ -211,8 +211,8 @@ for reference but inactive. If Redis issues occur, check harness-redis container
 
 Every remediation cycle produces a structured report:
 
-### 1. RA-H OS Knowledge Graph Node
+### 1. Gitea Log Entry
-Created as `[LEARN] litellm-self-heal: <run_id>` with full JSON report.
+Pushed to `SyslogSolution/health-logs/litellm/{run_id}.json` — versioned, searchable, not in graph.
 
 ### 2. Zulip DM to Owner
 - `issues_fixed > 0` — "🛠 LiteLLM Self-Heal — Fix Applied"
@@ -252,9 +252,11 @@ call report-generator
   health: health
   actions: actions
 
--- Phase 4: Log to knowledge graph
+-- Phase 4: Log to Gitea (not knowledge graph — hard rule)
-call kg-logger
+call gitea-logger
   run_id: run_id
+  repo: SyslogSolution/health-logs
+  path: litellm/{run_id}.json
   health: health
   actions: actions
 
@@ -300,3 +302,20 @@ With failures:
   ]
 }
 ```
+
+## gitea-logger Implementation
+
+When this step executes, write the report JSON to a temp file and push to Gitea:
+
+```bash
+REPO="https://abiba-bot:${GITEA_PAT}@git.sysloggh.net/SyslogSolution/health-logs"
+DIR="litellm"
+FILE="${run_id}.json"
+echo "${report_json}" > /tmp/${FILE}
+(cd /tmp && git clone --depth 1 "${REPO}" && 
+  cp ${FILE} health-logs/${DIR}/${FILE} && 
+  cd health-logs && git add ${DIR}/${FILE} && 
+  git commit -m "litellm-health: ${run_id}" && git push)
+rm -rf /tmp/health-logs /tmp/${FILE}
+```
+

mumuni-delegation-prose-contract.prose.md

@@ -6,7 +6,7 @@ description: >
   delegation, verification, and delivery. Defines when to delegate, which
   worker to use for what, how to handle failures, and the kanban board
   protocol. Enforces context-window discipline and separation of concerns.
-  Runs on Mumuni (CT 118, storepve, .6) via Hermes agent.
+  Runs on Mumuni (inside Abiba CT100, hwepve, .24) via Hermes agent (Pi + Hermes Zulip gateway).
 version: 1.0.0
 ---
 
@@ -19,8 +19,8 @@ version: 1.0.0
 
 ## Topology
 
-**Cluster:** 5 Proxmox nodes (ocupve, acerpve, minipve, amdpve, storepve)
+**Cluster:** 6 Proxmox nodes (ocupve, acerpve, minipve, amdpve, storepve, hwepve)
-**Manager:** Mumuni (CT 118, storepve, .6) via Hermes agent
+**Manager:** Mumuni (inside Abiba CT100, hwepve, .24) via Hermes agent
 **Workers:** 6 profiles, all running on the same agent — no separate hosts needed
 
 This contract is infrastructure-agnostic in terms of which nodes are used.

pm2-self-heal.prose.md

@@ -52,7 +52,7 @@ description: >
    - If status is "online" → pass, log restarts count
    - If status is "stopped" or "errored" → **DO NOT RESTART** — alert owner immediately
    - If restarts > 5 in last hour → alert owner with full diagnostics
-4. **Log results** — Create `[LEARN]` node in knowledge graph for any actions taken
+4. **Log results** — Append to `SyslogSolution/health-logs/pm2/{timestamp}.md` in Gitea (not knowledge graph — hard rule)
 5. **Alert** — Send Zulip DM to owner if escalation needed (do NOT run pm2 commands during alerting)
 6. **Wait 5 min** → repeat from step 1
 

proxmox-monitor.prose.md

@@ -5,7 +5,7 @@ description: >
   Proxmox cluster + Docker monitoring via the existing Grafana/Prometheus stack
   on CT 116. Replaces Pulse with file-provisioned Grafana dashboards. Three
   exporters feed Prometheus: prometheus-pve-exporter (cluster-aware, single
-  instance), node_exporter (all 5 PVE nodes), and a custom docker-stats-exporter
+  instance), node_exporter (all 6 PVE nodes), and a custom docker-stats-exporter
   (Docker 29 / containerd image-store compatible, since cAdvisor cannot resolve
   the layerdb). Dashboards exposed at http://192.168.68.116:3001/ (direct LAN, not behind nginx).
 agent: abiba
@@ -33,8 +33,8 @@ agent: abiba
 
 | Exporter | Host:Port | Scope | Notes |
 |----------|-----------|-------|-------|
-| prometheus-pve-exporter | .116:9221 (container) | All 5 nodes + 14 guests + 36 storage pools | Single instance, cluster-aware via amdpve API. Config `/opt/monitoring/pve.yml` (token `monitoring@pve!prometheus`, PVEAuditor role). Metric schema is label-based (`id=node/amdpve`, `id=lxc/100`). |
+| prometheus-pve-exporter | .116:9221 (container) | All 6 nodes + guests + 36 storage pools | Single instance, cluster-aware via amdpve API. Config `/opt/monitoring/pve.yml` (token `monitoring@pve!prometheus`, PVEAuditor role). Metric schema is label-based (`id=node/amdpve`, `id=lxc/100`). |
-| node_exporter | .5/.6/.9/.12/.15:9100 (systemd) | Per-node CPU/mem/disk/net/temp | Installed via apt on all 5 PVE nodes, enabled (reboot-persistent). Collectors: textfile, systemd, tcpstat, ethtool. |
+| node_exporter | .5/.6/.9/.12/.15/.4:9100 (systemd) | Per-node CPU/mem/disk/net/temp | Installed via apt on all 6 PVE nodes, enabled (reboot-persistent). Collectors: textfile, systemd, tcpstat, ethtool. hwepve (.4) added 2026-07-19. |
 | docker-stats-exporter | .116:9324 (container) | 10 Docker containers on .116 | **Custom** (cAdvisor v0.51 incompatible with Docker 29 containerd image store — layerdb gone). Uses Docker Engine API over unix socket. Script `/opt/monitoring/docker-stats-exporter.py`. |
 
 ## PVE API Token
@@ -48,7 +48,7 @@ agent: abiba
 
 | UID | Title | Panels | Source |
 |-----|-------|--------|--------|
-| proxmox-cluster | Proxmox Cluster Overview | 16 | cluster status, 5-node CPU/mem/disk/load gauges, guests table, storage pools, guest CPU/mem timeseries |
+| proxmox-cluster | Proxmox Cluster Overview | 16 | cluster status, 6-node CPU/mem/disk/load gauges, guests table, storage pools, guest CPU/mem timeseries |
 | proxmox-node | Proxmox Node Detail | 13 | per-node CPU per-core, memory, network, disk IO/IOPS/latency, temperature, disk space (variable: $node) |
 | docker-containers | Docker Containers | 10 | per-container CPU/mem/network, restarts, memory limit ratio (variable: $container) |
 | gpu-fleet | GPU Fleet | 7 | (existing, preserved in DB, not provisioned) |
@@ -77,9 +77,9 @@ agent: abiba
 | `/opt/monitoring/grafana/dashboards/build-dashboards.py` | .116 | dashboard JSON generator |
 | `/opt/monitoring/grafana/dashboards/json/*.json` | .116 | provisioned dashboard definitions |
 | `/opt/monitoring/grafana/datasources/prometheus.yml` | .116 | datasource provisioning |
-| `/etc/default/prometheus-node-exporter` | .5/.6/.9/.12/.15 | node_exporter collector config |
+| `/etc/default/prometheus-node-exporter` | .5/.6/.9/.12/.15/.4 | node_exporter collector config |
 
-## Cluster "Tabiri" — 5 Nodes
+## Cluster "Tabiri" — 6 Nodes
 
 | Node | IP | Role |
 |------|----|----|
@@ -87,7 +87,8 @@ agent: abiba
 | storepve | 192.168.68.6 | PVE |
 | acerpve | 192.168.68.9 | PVE (hosts llm-gpu qemu/101) |
 | minipve | 192.168.68.12 | PVE |
-| amdpve | 192.168.68.15 | PVE + Strix Halo LLM (ornith) |
+| amdpve | 192.168.68.15 | PVE + Strix Halo LLM (qwen3.6-35B-udq4, strix-moe) |
+| hwepve | 192.168.68.4 | PVE (Huawei Matebook 16, 12C/15GB) — hosts Mumuni (lxc/114) migrated from minipve 2026-07-20 |
 
 ## Operations
 

scripts/agent-health-check.py

@@ -1,10 +1,10 @@
 #!/usr/bin/env python3
 """
-/root/scripts/agent-health-check.py — Consolidated Agent Health Verification
+/root/scripts/agent-health-check.py — Consolidated Agent Health Verification v2
 
-Single non-disruptive health check replacing 7 scattered scripts.
+Verifies: LiteLLM keys (agent-specific), GPU port conflicts, agent Zulip streaming,
-Verifies: LiteLLM keys, GPU port conflicts, agent Zulip streaming,
+gateway liveness, gateway log health, CT liveness, config YAML integrity,
-gateway liveness, and gateway log health. NEVER restarts anything.
+wrapper/CLI integrity, vault secret non-emptiness. NEVER restarts anything.
 
 Usage:
   python3 /root/scripts/agent-health-check.py          # Full check
@@ -12,59 +12,39 @@ Usage:
   python3 /root/scripts/agent-health-check.py --quiet  # Only output on failure
 
 Cron: */10 * * * * python3 /root/scripts/agent-health-check.py --quiet
+
+Changelog:
+  v2 (2026-07-26): Added CT liveness, config validation, wrapper integrity,
+    vault secret emptiness check. Fixed Koby/Koonimo SSH hosts and agent key
+    name format ({NAME}_LITELLM_API_KEY not LITELLM_API_KEY_{NAME}).
+    Fleet roster: tanko (.122), mumuni (.24, inside abiba CT100), koby (.129), koonimo (.114),
+    abiba (.24).
 """
 
 import subprocess, json, sys, os, time
 from datetime import datetime
 
 LITELLM = "http://192.168.68.116:80"
+INFISICAL_PROJECT = "322fceab-39da-4854-a55a-568e76c0f13f"
+INFISICAL_ENV = "prod"
 
-def _get_agent_key(agent_name):
+# PVE node IPs for CT liveness checks
-    """Retrieve agent key from Infisical vault."""
+PVE_NODES = {
-    try:
+    "hwepve":  "192.168.68.4",
-        result = subprocess.run(
+    "amdpve":  "192.168.68.15",
-            ["infisical", "secrets", "get", "LITELLM_API_KEY",
+    "minipve": "192.168.68.12",
-             "--project=agents", "--env=production", "--plain"],
+    "storepve": "192.168.68.6",
-            capture_output=True, text=True, timeout=10
+    "acerpve": "192.168.68.9",
-        )
+    "ocupve":  "192.168.68.5",
-        if result.returncode == 0:
-            return result.stdout.strip()
-    except Exception:
-        pass
-
-    # Fallback: try exporting all secrets
-    try:
-        result = subprocess.run(
-            ["infisical", "export", "--project=agents", "--env=production",
-             "--format=dotenv"],
-            capture_output=True, text=True, timeout=10
-        )
-        if result.returncode == 0:
-            for line in result.stdout.splitlines():
-                if line.startswith(f"LITELLM_API_KEY_{agent_name.upper()}") or \
-                   (line.startswith("LITELLM_API_KEY=") and agent_name == os.uname().nodename):
-                    return line.split("=", 1)[1].strip().strip('"').strip("'")
-    except Exception:
-        pass
-
-    return None
-
-# Agent keys are pulled from Infisical vault at runtime.
-# The 'key' field is populated dynamically below.
-AGENTS = {
-    "tanko":   {"ct": 112, "host": "192.168.68.122", "user": "jerome"},
-    "mumuni":  {"ct": 114, "host": "192.168.68.123", "user": "root"},
-    "koby":    {"ct": 111, "host": None,              "user": None},
-    "koonimo": {"ct": 113, "host": None,              "user": None},
 }
 
-# Inject keys from vault
+# Agent definitions: ct, host, user, pve_node, vault_key_name
-for agent_name in AGENTS:
+AGENTS = {
-    key = _get_agent_key(agent_name)
+    "tanko":   {"ct": 112, "host": "192.168.68.122", "user": "jerome", "pve": "amdpve",  "vault_key": "TANKO_LITELLM_API_KEY"},
-    if key:
+    "abiba":   {"ct": 100, "host": "192.168.68.24",  "user": "root",   "pve": "hwepve",  "vault_key": None},  # Pi agent + Mumuni Zulip, no vault key
-        AGENTS[agent_name]["key"] = key
+    "koby":    {"ct": 111, "host": "192.168.68.129", "user": "root",   "pve": "amdpve",  "vault_key": "KOBY_LITELLM_API_KEY"},
-    else:
+    "koonimo": {"ct": 113, "host": "192.168.68.114", "user": "root",   "pve": "amdpve",  "vault_key": "KOONIMO_LITELLM_API_KEY"},
-        AGENTS[agent_name]["key"] = None
+}
 
 GPU_HOSTS = {
     "gpu-rtx3090 (.8)":     {"host": "192.168.68.8",   "port": 8080, "service": "llama-server"},
@@ -74,6 +54,11 @@ GPU_HOSTS = {
 
 FAIL = []
 
+INFISICAL_TOKEN = os.environ.get("INFISICAL_TOKEN")
+INFISICAL_API_URL = os.environ.get("INFISICAL_API_URL", "https://vault.sysloggh.net")
+
+# ── Helpers ──────────────────────────────────────────────────────────
+
 def ssh(host, cmd, user="root"):
     """Execute a command on a remote host, return stdout or None."""
     try:
@@ -112,15 +97,81 @@ def http_json(url, headers=None, timeout=5):
     except:
         return None
 
+def run_infisical(args, quiet=True):
+    """Run infisical CLI with env-based auth, return stdout or None."""
+    env = os.environ.copy()
+    env["INFISICAL_API_URL"] = INFISICAL_API_URL
+    if INFISICAL_TOKEN:
+        env["INFISICAL_TOKEN"] = INFISICAL_TOKEN
+    try:
+        result = subprocess.run(
+            ["/usr/bin/infisical"] + args,
+            capture_output=True, text=True, timeout=15, env=env
+        )
+        return result.stdout.strip() if result.returncode == 0 else None
+    except:
+        return None
+
+# ── KEY LOOKUP FIX ───────────────────────────────────────────────────
+
+def _get_agent_key(agent_name, vault_key_name):
+    """Retrieve agent-specific key from Infisical vault.
+    
+    Uses {NAME}_LITELLM_API_KEY format (e.g., TANKO_LITELLM_API_KEY,
+    KOONIMO_LITELLM_API_KEY) which matches actual vault key names.
+    """
+    if not vault_key_name:
+        return None
+
+    # Primary: get the agent-specific key by name
+    key = run_infisical([
+        "secrets", "get", vault_key_name,
+        "--projectId=" + INFISICAL_PROJECT,
+        "--env=" + INFISICAL_ENV,
+        "--plain",
+    ])
+    if key and key.startswith("sk-"):
+        return key
+
+    # Fallback: export all and search for the key name
+    try:
+        export = run_infisical([
+            "export",
+            "--projectId=" + INFISICAL_PROJECT,
+            "--env=" + INFISICAL_ENV,
+            "--format=dotenv",
+        ])
+        if export:
+            for line in export.splitlines():
+                if line.startswith(vault_key_name + "="):
+                    value = line.split("=", 1)[1].strip().strip('"').strip("'")
+                    if value.startswith("sk-"):
+                        return value
+    except:
+        pass
+
+    return None
+
+# Inject keys from vault for each agent
+for agent_name in AGENTS:
+    info = AGENTS[agent_name]
+    key = _get_agent_key(agent_name, info.get("vault_key"))
+    AGENTS[agent_name]["key"] = key
+
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 1: LiteLLM Key Validation
+# CHECK 1: LiteLLM Key Validation (agent-specific keys)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_keys():
     for name, agent in AGENTS.items():
+        key = agent.get("key")
+        if not key:
+            print(f"  ❌ {name}: NO KEY FOUND (vault empty or unreachable)")
+            FAIL.append(f"key:{name}:no-key")
+            continue
         data = http_json(f"{LITELLM}/v1/models",
-                         headers={"Authorization": f"Bearer {agent['key']}"})
+                         headers={"Authorization": f"Bearer {key}"})
         if data and data.get("data"):
             model = data["data"][0].get("id", "?")
             print(f"  ✅ {name}: key valid → {model}")
@@ -130,7 +181,7 @@ def check_keys():
 
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 2: GPU Port Conflict Detection
+# CHECK 2: GPU Port Conflict Detection (unchanged)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_gpu_ports():
@@ -158,7 +209,6 @@ def check_gpu_ports():
             else:
                 print(f"  ⚠️  {label}: svc={svc_status}, port owned by {port_owner}")
         else:
-            # Verify health endpoint
             health = ssh(host, f"curl -s --max-time 5 http://localhost:{port}/health")
             if health and '"status":"ok"' in health:
                 print(f"  ✅ {label}: healthy (pid={port_owner})")
@@ -171,7 +221,7 @@ def check_gpu_ports():
 
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 3: Agent Gateway Liveness + Streaming
+# CHECK 3: Agent Gateway Liveness + Streaming (now covers all agents)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_agents():
@@ -184,8 +234,11 @@ def check_agents():
             print(f"  ⬜ {name} (CT {ct}): cannot SSH — skip liveness check")
             continue
 
-        # Gateway process (exclude the infisical bash wrapper that contains the same string)
+        # Gateway process
         pid = ssh(host, "pgrep -f 'hermes_cli.main gateway run' | grep -v infisical | head -1", user=user)
+        if not pid:
+            # Try alternate binary name
+            pid = ssh(host, "pgrep -f 'hermes.*gateway' | grep -v infisical | grep -v bash | head -1", user=user)
         if not pid:
             print(f"  ❌ {name}: GATEWAY NOT RUNNING")
             FAIL.append(f"gateway-down:{name}")
@@ -203,7 +256,7 @@ def check_agents():
         else:
             gw_state, zulip = "no-state-file", "?"
 
-        # Zulip streaming: does adapter have edit_message?
+        # Zulip streaming check
         adapter_paths = [
             "~/.hermes/plugins/zulip-platform/adapter.py",
             "~/.hermes/plugins/platforms/zulip/adapter.py",
@@ -220,13 +273,183 @@ def check_agents():
             r"journalctl --user -u hermes-gateway --since '10 min ago' -o cat --no-pager 2>/dev/null "
             r"| grep -ci 'error\|traceback\|exception\|401\|403\|500' || echo 0",
             user=user)
-        recent_errors = (recent_errors or "0").strip().split("\n")[-1]  # take last line
+        recent_errors = (recent_errors or "0").strip().split("\n")[-1]
 
         print(f"  {'✅' if gw_state == 'running' and zulip == 'connected' else '⚠️'} "
               f"{name}: gw={gw_state} zulip={zulip} streaming={streaming} "
               f"errors_10m={recent_errors.strip() or '0'} pid={pid}")
 
 
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 4: CT Liveness (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_ct_liveness():
+    """Check that all agent CTs are running on their PVE nodes."""
+    for name, agent in AGENTS.items():
+        ct = agent["ct"]
+        pve_node = agent.get("pve")
+        if not pve_node:
+            print(f"  ⬜ {name} (CT {ct}): no PVE node mapped — skip")
+            continue
+
+        pve_ip = PVE_NODES.get(pve_node)
+        if not pve_ip:
+            print(f"  ⬜ {name}: unknown PVE node '{pve_node}' — skip")
+            continue
+
+        status = ssh(pve_ip, f"pct status {ct} 2>/dev/null", user="root")
+        if not status:
+            print(f"  ❌ {name} (CT {ct} on {pve_node}): PVE UNREACHABLE")
+            FAIL.append(f"ct-unreachable:{name}:{pve_ip}")
+        elif "running" in status:
+            print(f"  ✅ {name} (CT {ct} on {pve_node}): running")
+        elif "stopped" in status:
+            print(f"  ❌ {name} (CT {ct} on {pve_node}): STOPPED")
+            FAIL.append(f"ct-stopped:{name}")
+        else:
+            print(f"  ⚠️  {name} (CT {ct} on {pve_node}): {status.strip()}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 5: Config YAML Integrity (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_config_integrity():
+    """Verify agent config.yaml parses as valid YAML."""
+    for name, agent in AGENTS.items():
+        host = agent.get("host")
+        user = agent.get("user")
+        if not host or not user:
+            print(f"  ⬜ {name}: cannot SSH — skip config check")
+            continue
+
+        # Check YAML parses
+        yaml_ok = ssh(host,
+            "python3 -c "
+            '"import yaml; yaml.safe_load(open(\'/root/.hermes/config.yaml\')); print(\'OK\')" '
+            "2>&1 || echo 'FAIL'",
+            user=user)
+        if not yaml_ok:
+            print(f"  ❌ {name}: SSH UNREACHABLE (config check skipped)")
+            FAIL.append(f"config-unreachable:{name}")
+        elif "OK" in yaml_ok:
+            print(f"  ✅ {name}: config.yaml valid YAML")
+        else:
+            print(f"  ❌ {name}: config.yaml YAML ERROR — {yaml_ok[:120]}")
+            FAIL.append(f"config-yaml-error:{name}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 6: Wrapper/CLI Integrity (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_wrapper_integrity():
+    """Verify the hermes CLI wrapper exists and can reach hermes-real."""
+    for name, agent in AGENTS.items():
+        host = agent.get("host")
+        user = agent.get("user")
+        if not host or not user:
+            print(f"  ⬜ {name}: cannot SSH — skip wrapper check")
+            continue
+
+        # Check wrapper exists
+        wrapper = ssh(host, "ls -la /root/.local/bin/hermes 2>/dev/null", user=user)
+        if not wrapper:
+            # Check alternate wrapper locations
+            wrapper = ssh(host, "which hermes 2>/dev/null; command -v hermes 2>/dev/null", user=user)
+            if not wrapper:
+                print(f"  ❌ {name}: NO HERMES CLI WRAPPER FOUND")
+                FAIL.append(f"wrapper-missing:{name}")
+                continue
+            else:
+                print(f"  ⚠️  {name}: hermes at {wrapper.strip()} (not ~/.local/bin/hermes)")
+
+        # Check wrapper has correct infisical path
+        infisical_path_valid = ssh(host,
+            "head -20 /root/.local/bin/hermes 2>/dev/null | grep -q '/usr/bin/infisical' && echo OK || echo MISS",
+            user=user)
+        if infisical_path_valid == "MISS":
+            # Check if infisical exists on path
+            inf_actual = ssh(host, "command -v infisical 2>/dev/null", user=user)
+            if not inf_actual:
+                print(f"  ❌ {name}: INFISICAL NOT INSTALLED (wrapper broken)")
+                FAIL.append(f"wrapper-no-infisical:{name}")
+            else:
+                print(f"  ⚠️  {name}: wrapper infisical path may be wrong (infisical at {inf_actual})")
+                FAIL.append(f"wrapper-infisical-path:{name}")
+
+        # Check hermes-real exists
+        hermes_real = ssh(host,
+            "ls -la /root/.local/bin/hermes-real 2>/dev/null || echo MISS",
+            user=user)
+        if not hermes_real or hermes_real.strip() == "MISS":
+            # Check venv path
+            hermes_real = ssh(host,
+                "ls -la /usr/local/lib/hermes-agent/venv/bin/hermes 2>/dev/null || echo MISS",
+                user=user)
+            if not hermes_real or hermes_real.strip() == "MISS":
+                print(f"  ❌ {name}: hermes-real NOT FOUND (wrapper broken)")
+                FAIL.append(f"wrapper-no-hermes-real:{name}")
+            else:
+                print(f"  ✅ {name}: hermes-real at alt path")
+
+        # Check the .env file has the key
+        env_has_key = ssh(host,
+            "grep -c 'LITELLM_API_KEY' /root/.hermes/.env 2>/dev/null || echo 0",
+            user=user)
+        if env_has_key and env_has_key.strip() not in ("", "0"):
+            print(f"  ✅ {name}: wrapper + .env key present")
+        else:
+            print(f"  ⚠️  {name}: .env may be missing LITELLM_API_KEY entry")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 7: Vault Secret Non-Emptiness (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_vault_secrets():
+    """Verify agent-specific vault secrets are non-empty and start with sk-."""
+    for name, agent in AGENTS.items():
+        vault_key_name = agent.get("vault_key")
+        if not vault_key_name:
+            continue
+
+        key = agent.get("key")
+        if not key:
+            print(f"  ❌ {name}: vault secret {vault_key_name} MISSING or EMPTY")
+            FAIL.append(f"vault-empty:{name}:{vault_key_name}")
+        elif not key.startswith("sk-"):
+            print(f"  ❌ {name}: vault secret {vault_key_name} WRONG FORMAT (starts '{key[:8]}...')")
+            FAIL.append(f"vault-bad-format:{name}:{vault_key_name}")
+        else:
+            print(f"  ✅ {name}: vault {vault_key_name}=sk-...{key[-4:]}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# DEPLOY: copy updated script to /root/scripts/ on local host
+# ═══════════════════════════════════════════════════════════════════
+
+def deploy_self():
+    """Copy this script to /root/scripts/agent-health-check.py if out of date."""
+    dest = "/root/scripts/agent-health-check.py"
+    try:
+        with open(__file__, "r") as f:
+            current = f.read()
+        if os.path.isfile(dest):
+            with open(dest, "r") as f:
+                existing = f.read()
+            if current == existing:
+                return  # Already deployed
+        # Write new version
+        with open(dest, "w") as f:
+            f.write(current)
+        os.chmod(dest, 0o755)
+        print(f"  📦 Deployed updated script to {dest}")
+    except:
+        pass  # Not fatal if deploy fails
+
+
 # ═══════════════════════════════════════════════════════════════════
 # MAIN
 # ═══════════════════════════════════════════════════════════════════
@@ -235,8 +458,12 @@ def main():
     quiet = "--quiet" in sys.argv
     as_json = "--json" in sys.argv
 
+    # Self-deploy to canonical location
+    if not quiet and "--no-deploy" not in sys.argv:
+        deploy_self()
+
     if not quiet:
-        print(f"🏥 Agent Health Check — {datetime.now().strftime('%Y-%m-%d %H:%M UTC')}")
+        print(f"🏥 Agent Health Check v2 — {datetime.now().strftime('%Y-%m-%d %H:%M UTC')}")
         print()
 
     print("🔑 LiteLLM Keys:")
@@ -249,11 +476,26 @@ def main():
 
     print("🤖 Agent Gateways:")
     check_agents()
+    print()
+
+    print("🖥️  CT Liveness:")
+    check_ct_liveness()
+    print()
+
+    print("📝 Config Integrity:")
+    check_config_integrity()
+    print()
+
+    print("🔌 Wrapper/CLI Integrity:")
+    check_wrapper_integrity()
+    print()
+
+    print("🔐 Vault Secrets:")
+    check_vault_secrets()
 
     if FAIL:
         print(f"\n❌ {len(FAIL)} FAILURE(S): {' | '.join(FAIL)}")
         if quiet:
-            # In quiet mode, only print failures as a single alert line
             print(f"ALERT agent-health:{','.join(FAIL)}")
     elif not quiet:
         print("\n✅ All checks passed")

scripts/netbird-add-domain.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# Netbird Reverse Proxy — Add a new domain route
+#
+# Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]
+#
+# Example:
+#   netbird-add-domain.sh dns.sysloggh.net 192.168.68.10 80
+#
+# This script adds a domain to the Netbird proxy by inserting records
+# directly into the management server's SQLite database, then restarting
+# the proxy stack.
+#
+# Prerequisites: SSH root access to 72.61.0.17
+#                sqlite3 available on VPS
+#
+# Requires: The domain must already have a DNS CNAME to netbird.sysloggh.net
+#           pointing to 72.61.0.17.
+
+set -euo pipefail
+
+DOMAIN="${1:?Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]}"
+BACKEND_IP="${2:?Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]}"
+PORT="${3:-80}"
+PROTOCOL="${4:-http}"
+
+VPS="root@72.61.0.17"
+DB_VOLUME="/var/lib/docker/volumes/root_netbird_data/_data"
+DB="$DB_VOLUME/store.db"
+
+echo "=== Adding Netbird proxy route ==="
+echo "Domain:    $DOMAIN"
+echo "Backend:   $BACKEND_IP:$PORT ($PROTOCOL)"
+echo ""
+
+ssh "$VPS" bash << REMOTESCRIPT
+set -euo pipefail
+
+# Generate unique ID using timestamp hash (Netbird format)
+ID_SUFFIX=\$(date +%s | md5sum | head -c 16)
+SVC_ID="d9\${ID_SUFFIX}ptsnc73\$(date +%s | md5sum | head -c 10)"
+TGT_ID=\$(sqlite3 "$DB" "SELECT COALESCE(MAX(id), 100) + 1 FROM targets;")
+ACCOUNT_ID="d88av3aptsnc73clmogg"
+ZONE_ID="d8adqjaptsnc73fro5g0"
+
+echo "Service ID: \$SVC_ID"
+echo "Target ID:  \$TGT_ID"
+
+# Insert service
+sqlite3 "$DB" "INSERT INTO services (id, account_id, name, domain, proxy_cluster, enabled, terminated, pass_host_header, rewrite_redirects, mode, source, port_auto_assigned, private) VALUES (\"\$SVC_ID\", \"\$ACCOUNT_ID\", \"$DOMAIN\", \"$DOMAIN\", \"netbird.sysloggh.net\", 1, 0, 1, 0, \"http\", \"permanent\", 0, 0);"
+echo "Service: OK"
+
+# Insert target
+sqlite3 "$DB" "INSERT INTO targets (id, account_id, service_id, host, port, protocol, target_id, target_type, enabled, skip_tls_verify, request_timeout, session_idle_timeout, agent_network, disable_access_log) VALUES (\$TGT_ID, \"\$ACCOUNT_ID\", \"\$SVC_ID\", \"$BACKEND_IP\", $PORT, \"$PROTOCOL\", \"\$ZONE_ID\", \"subnet\", 1, 0, 0, 0, 0, 0);"
+echo "Target:  OK"
+
+# Verify
+sqlite3 -column "$DB" "SELECT s.name, t.host, t.port, t.protocol FROM services s JOIN targets t ON s.id=t.service_id WHERE s.name=\"$DOMAIN\";"
+
+echo ""
+echo "Restarting proxy stack..."
+cd /root && docker compose restart netbird-server 2>/dev/null
+sleep 15
+docker compose restart proxy 2>/dev/null
+echo "Done. Verify with: curl -sI https://$DOMAIN"
+REMOTESCRIPT

scripts/swap-gpu-dense-model.sh

@@ -0,0 +1,91 @@
+#!/bin/bash
+# swap-gpu-dense-model.sh — Swap RTX 3090 from qwen3.6-27B-code to SmartCode-Fable-5
+# Run when download completes: ssh root@192.168.68.8 'bash -s' < this script
+#
+# Usage: bash swap-gpu-dense-model.sh
+# Requires: new model at /home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf
+
+set -e
+
+MODEL_PATH="/home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf"
+OLD_WRAPPER="/home/llmuser/llama-wrapper.sh"
+
+echo "═══ Swapping gpu-dense to SmartCode-Fable-5 ═══"
+
+# 1. Verify model file
+if [ ! -f "$MODEL_PATH" ]; then
+    echo "❌ Model not found at $MODEL_PATH"
+    echo "   Download: curl -L -o $MODEL_PATH <huggingface-url>"
+    exit 1
+fi
+
+MODEL_SIZE=$(ls -lh "$MODEL_PATH" | awk '{print $5}')
+echo "✅ Model found: $MODEL_SIZE"
+
+# 2. Create new wrapper script for SmartCode-Fable-5
+cat > /home/llmuser/llama-fable-wrapper.sh << 'WRAPPER'
+#!/bin/bash
+# SmartCode-Fable-5 llama-server wrapper for RTX 3090
+# Sampler settings from model card: temp 0.9, top-p 0.95, top-k 60, repeat-penalty off
+
+PORT=8080
+GHOST_PID=$(ss -tlnp 2>/dev/null | grep -Po ":${PORT}\s+.*pid=\K[0-9]+" | head -1)
+if [ -n "$GHOST_PID" ] && [ "$GHOST_PID" != "$$" ]; then
+    echo "[wrapper] Port $PORT occupied by ghost pid $GHOST_PID — cleaning up" >&2
+    kill -9 "$GHOST_PID" 2>/dev/null
+    sleep 2
+fi
+
+exec /usr/local/bin/llama-server \
+    --model /home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf \
+    --ctx-size 131072 \
+    --cache-type-k q4_0 \
+    --cache-type-v q4_0 \
+    --flash-attn 1 \
+    --cont-batching \
+    --parallel 1 \
+    --batch-size 2048 \
+    --ubatch-size 1024 \
+    --n-gpu-layers 99 \
+    --temp 0.9 \
+    --top-p 0.95 \
+    --top-k 60 \
+    --min-p 0.0 \
+    --repeat-penalty 1.0 \
+    --api-key not-needed \
+    --port 8080 \
+    --host 0.0.0.0
+WRAPPER
+
+chmod 755 /home/llmuser/llama-fable-wrapper.sh
+echo "✅ Created /home/llmuser/llama-fable-wrapper.sh"
+
+# 3. Update systemd service to use new wrapper
+echo "📝 Updating systemd service..."
+sed -i 's|ExecStart=/home/llmuser/llama-wrapper.sh|ExecStart=/home/llmuser/llama-fable-wrapper.sh|' /etc/systemd/system/llama-server.service
+systemctl daemon-reload
+
+# 4. Stop old server, start new
+echo "🔄 Restarting llama-server..."
+systemctl stop llama-server
+sleep 3
+systemctl start llama-server
+sleep 8
+
+# 5. Verify
+echo ""
+echo "═══ Verification ═══"
+systemctl is-active llama-server
+echo ""
+echo "Port 8080:"
+ss -tlnp 2>/dev/null | grep ":8080" | head -1
+echo ""
+echo "GPU VRAM:"
+nvidia-smi --query-gpu=memory.used,memory.total,utilization.gpu --format=csv,noheader 2>/dev/null
+echo ""
+echo "=== Health check ==="
+curl -s --max-time 5 http://localhost:8080/health 2>/dev/null
+echo ""
+echo ""
+echo "✅ Swap complete. Test via LiteLLM:"
+echo "  curl -s http://192.168.68.116/v1/chat/completions -H 'Authorization: Bearer <key>' -H 'Content-Type: application/json' -d '{\"model\":\"gpu-dense\",\"messages\":[{\"role\":\"user\",\"content\":\"write hello world in python\"}],\"max_tokens\":100}'"

zulip-health.prose.md

@@ -1,9 +1,9 @@
 ---
 kind: responsibility
 name: zulip-health
-description: Multi-platform health monitor for the Zulip messaging mesh spanning Platform A (Abiba pi), Platform B (Hermes agents Tanko/Mumuni/Koonimo/Koby), and Platform C (Agent Zero). Verifies bot registration, DM delivery, cross-platform connectivity, secret injection, and YAML config integrity.
+description: Multi-platform health monitor for the Zulip messaging mesh spanning Platform A (Agent Zero Docker), Platform B (Hermes agents Tanko/Mumuni), and the Zulip bridge. Verifies bot registration, DM delivery, and cross-platform connectivity.
 title: Zulip Mesh Health Monitor — Multi-Platform
-version: 3.1.0
+version: 3.0.0
 runtime_contract: 2
 agent: abiba
 ---
@@ -12,15 +12,11 @@ agent: abiba
 
 Monitors ALL Zulip-connected agents across three platforms (pi, Hermes, Agent Zero).
 Runs every 15 minutes in the background. Also triggers on session start.
-v3.1.0 adds Koonimo+Koby to Platform B, Infisical dependency checks, config YAML
-validation, stale PID/lock detection, Telegram adapter health, and the
-cli_agent_setup_mixin patch verification.
 
 ## Requires
 
 - **Zulip API key** for `abiba-bot@chat.sysloggh.net` in `$ZULIP_API_KEY`
-- **SSH access** to Tanko (192.168.68.122), Mumuni (192.168.68.123), and Agent Zero Docker host (192.168.68.14)
+- **SSH access** to Tanko (192.168.68.122), Mumuni (192.168.68.24, inside Abiba CT100 on hwepve), and Agent Zero Docker host (192.168.68.14)
-- **SSH access to amdpve (192.168.68.15)** for `pct exec` access to Koonimo (CT 113) and Koby (CT 111)
 - **PM2** on localhost for pi process management
 - **Network access** to `chat.sysloggh.net`, `localhost:9200`
 - **Write access** to `/root/zulip-health-monitor.log` and `/tmp/zulip-monitor-debounce`
@@ -53,22 +49,12 @@ cli_agent_setup_mixin patch verification.
     "zulip_state": "connected",
     "heartbeat_age_seconds": 45,
     "gateway_pid": 1234,
-    "infisical_present": true,
-    "config_valid": true,
-    "telegram_state": "connected",
-    "no_key_required_count": 0,
     "edit_fail_rate_pct": 0,
     "severity": "healthy"
   }
 }
 ```
 
-New fields in v3.1.0:
-- `infisical_present` — /usr/local/bin/infisical exists on the agent CT
-- `config_valid` — /root/.hermes/config.yaml passes YAML validation
-- `telegram_state` — Telegram adapter status from gateway_state.json
-- `no_key_required_count` — count of `no-key-required` in gateway logs
-
 ### Postconditions
 
 - Every platform is independently checked; one failure doesn't block others
@@ -95,13 +81,13 @@ Log as "unreachable" — don't treat as critical unless it persists for 3+ conse
 ## Streaming Support (2026-07-05)
 
 Zulip agents now support progressive message editing during agent generation.
-When a Hermes agent (Tanko, Mumuni, Koonimo, Koby) processes a message, the
+When a Hermes agent (Tanko, Mumuni) processes a message, the response is
-response is streamed in real-time via Zulip's `PATCH /api/v1/messages/{id}` API:
+streamed in real-time via Zulip's `PATCH /api/v1/messages/{id}` API:
 
 - Adapter implements `edit_message()` using `_api_patch()` helper
 - Gateway stream consumer progressively edits the Zulip message
 - User sees real-time agent thinking instead of waiting for full response
-- Verified: Tanko (CT 112), Mumuni (CT 114), Koonimo (CT 113), Koby (CT 111)
+- Verified: Tanko (CT 112) and Mumuni (CT 114) both have streaming active
 
 ### Verification
 ```bash
@@ -196,217 +182,50 @@ grep -a "Finalized\|Failed to finalize" /root/.pm2/logs/abiba-zulip-out.log | ta
 | `last_error` set | Log and monitor |
 | Crash loop >10/h | Alert user |
 
-### Step 3: Platform B — Hermes (Tanko .122, Mumuni .123, Koonimo .114, Koby .129)
+### Step 3: Platform B — Hermes (Tanko .122, Mumuni .24)
-
-Platform B now monitors four Hermes agents:
-- Tanko (CT 112, 192.168.68.122) — Zulip + Telegram
-- Mumuni (CT 114, 192.168.68.123) — Zulip + Telegram + Email
-- Koonimo (CT 113, 192.168.68.114, hostname "baggy") — Zulip + Telegram
-- Koby (CT 111, 192.168.68.129, hostname "tdunna") — Zulip + Telegram
-
-SSH access: Koonimo is reachable at .114; Koby has no direct SSH. Use `pct exec`
-from amdpve as the primary access method for both:
-```bash
-ssh root@192.168.68.15 "pct exec 113 -- <command>"   # Koonimo (or ssh .114)
-ssh root@192.168.68.15 "pct exec 111 -- <command>"   # Koby (pct exec only)
-```
 
 **B1: Gateway State**
 
 ```bash
 ssh root@192.168.68.122 "cat ~/.hermes/gateway_state.json"
-ssh root@192.168.68.123 "cat ~/.hermes/gateway_state.json"
+ssh root@192.168.68.24 "cat ~/.hermes/gateway_state.json"  # Mumuni inside Abiba CT100
-ssh root@192.168.68.15 "pct exec 113 -- cat /root/.hermes/gateway_state.json"
-ssh root@192.168.68.15 "pct exec 111 -- cat /root/.hermes/gateway_state.json"
 ```
 
-Check `platforms.zulip.state`: `connected` ✅ | `disconnected` ❌ | `error` ❌.
+Check `platforms.zulip.state`: `connected` ✅ | `disconnected` ❌ | `error` ❌ | missing → not installed.
-
-**B1.5: Infisical Dependency Check**
-
-```bash
-ssh root@<CT> "test -f /usr/local/bin/infisical && echo OK || echo MISSING"
-# pct exec variant for Koonimo/Koby:
-ssh root@192.168.68.15 "pct exec 113 -- test -f /usr/local/bin/infisical && echo OK || echo MISSING"
-ssh root@192.168.68.15 "pct exec 111 -- test -f /usr/local/bin/infisical && echo OK || echo MISSING"
-```
-
-If MISSING → flag `infisical_present: false`, note as degraded — gateway cannot
-auto-start on reboot without the infisical binary.
 
 **B2: Agent Process**
 
 ```bash
 ssh root@<CT> "ps aux | grep 'gateway run' | grep -v grep"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- ps aux | grep 'gateway run' | grep -v grep"
-ssh root@192.168.68.15 "pct exec 111 -- ps aux | grep 'gateway run' | grep -v grep"
 ```
 
-Gateway PID should exist with uptime > 60s. Check for stale PIDs:
+Gateway PID should exist with uptime > 60s. **Dual-gateway detection**: if more than one `gateway run` process is found, the gateway has a collision (typically one `--force` and one `--replace` process). Kill the newer/duplicate process, then restart the remaining gateway via PM2 (`pm2 restart mumuni-zulip`). Check gateway log for "Gateway running with 2 platform(s)" (not 1) to confirm Zulip reloaded.
-- `gateway.pid` and `gateway.lock` files that reference a dead process
-- Multiple gateway processes (duplicate PIDs)
-
-**B2.5: Config YAML Validation**
-
-```bash
-ssh root@<CT> "python3 -c 'import yaml; yaml.safe_load(open(\"/root/.hermes/config.yaml\"))' 2>&1"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- python3 -c 'import yaml; yaml.safe_load(open(\"/root/.hermes/config.yaml\"))' 2>&1"
-ssh root@192.168.68.15 "pct exec 111 -- python3 -c 'import yaml; yaml.safe_load(open(\"/root/.hermes/config.yaml\"))' 2>&1"
-```
-
-Expected: no output (clean parse). If parse fails → flag `config_valid: false`,
-degraded — gateway is running on stale in-memory config.
-
-Check specifically for:
-- Stray `api_key: sk-...` lines indented under `api_key_env` entries in
-  `custom_providers` section (hardcoded keys violate hermes-key-enforcement)
-- Indentation errors in `custom_providers`, `auxiliary`, or `compression` blocks
 
 **B3: Heartbeat Verification**
 
 ```bash
 ssh root@<CT> "grep Heartbeat ~/.hermes/logs/agent.log | tail -3"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- grep Heartbeat /root/.hermes/logs/agent.log | tail -3"
-ssh root@192.168.68.15 "pct exec 111 -- grep Heartbeat /root/.hermes/logs/agent.log | tail -3"
 ```
 
 Expected: recent heartbeat (within 5 min), `polls=N` incrementing.
 Silence > 300s → warning. Silence > 600s → critical.
 
-**B3.5: Stale PID/Lock Detection**
-
-Before any restart action, check for stale pid/lock files:
-
-```bash
-ssh root@<CT> "ls -la /root/.hermes/gateway.pid /root/.hermes/gateway.lock 2>/dev/null"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- ls -la /root/.hermes/gateway.pid /root/.hermes/gateway.lock 2>/dev/null"
-ssh root@192.168.68.15 "pct exec 111 -- ls -la /root/.hermes/gateway.pid /root/.hermes/gateway.lock 2>/dev/null"
-```
-
-If gateway process is dead (no PID) but pid/lock files exist:
-```bash
-ssh root@<CT> "rm -f /root/.hermes/gateway.pid /root/.hermes/gateway.lock"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- rm -f /root/.hermes/gateway.pid /root/.hermes/gateway.lock"
-ssh root@192.168.68.15 "pct exec 111 -- rm -f /root/.hermes/gateway.pid /root/.hermes/gateway.lock"
-```
-
-Pid/lock files blocking restart → clear them before restart attempt.
-
 **B4: Response Delivery**
 
 ```bash
 ssh root@<CT> "grep -E 'Finalized|Failed to finalize|Replied to' ~/.hermes/logs/agent.log | tail -10"
-# pct exec variant for Koonimo/Koby:
-ssh root@192.168.68.15 "pct exec 113 -- grep -E 'Finalized|Failed to finalize|Replied to' /root/.hermes/logs/agent.log | tail -10"
-ssh root@192.168.68.15 "pct exec 111 -- grep -E 'Finalized|Failed to finalize|Replied to' /root/.hermes/logs/agent.log | tail -10"
 ```
 
 > 50% fail rate → critical.
 
-**B4.5: LiteLLM Key Injection Verification**
-
-Check gateway logs for `no-key-required` failure pattern (indicates the
-cli_agent_setup_mixin.py patch is missing):
-
-```bash
-ssh root@<CT> "grep -c 'no-key-required' /root/.hermes/logs/gateway.log 2>/dev/null || echo 0"
-# pct exec variant for Koonimo/Koby:
-ssh root@192.168.68.15 "pct exec 113 -- grep -c 'no-key-required' /root/.hermes/logs/gateway.log 2>/dev/null || echo 0"
-ssh root@192.168.68.15 "pct exec 111 -- grep -c 'no-key-required' /root/.hermes/logs/gateway.log 2>/dev/null || echo 0"
-```
-
-If > 0 → flag `no_key_required_count: <count>`, note as degraded — provider
-requests silently fall back to `no-key-required` when LITELLM_API_KEY env var
-resolves empty.
-
-**B5: Telegram Adapter Health**
-
-Check Telegram connectivity in gateway state or logs:
-
-```bash
-# From gateway_state.json (all agents):
-ssh root@<CT> "cat ~/.hermes/gateway_state.json | python3 -c 'import json,sys;d=json.load(sys.stdin);print(d[\"platforms\"].get(\"telegram\",{}).get(\"state\",\"missing\"))'"
-# pct exec variant for Koonimo/Koby (cat the file; read platforms.telegram.state):
-ssh root@192.168.68.15 "pct exec 113 -- cat /root/.hermes/gateway_state.json"
-ssh root@192.168.68.15 "pct exec 111 -- cat /root/.hermes/gateway_state.json"
-# From logs (check for stuck DNS resolution):
-ssh root@<CT> "grep -E 'Telegram.*Connecting|Telegram.*Connected|attempt 1/8' /root/.hermes/logs/gateway.log | tail -5"
-ssh root@192.168.68.15 "pct exec 113 -- grep -E 'Telegram.*Connecting|Telegram.*Connected|attempt 1/8' /root/.hermes/logs/gateway.log | tail -5"
-ssh root@192.168.68.15 "pct exec 111 -- grep -E 'Telegram.*Connecting|Telegram.*Connected|attempt 1/8' /root/.hermes/logs/gateway.log | tail -5"
-```
-
-Telegram states: `connected` ✅ | `disconnected` ❌ | `retrying` ⚠️ | `fatal` ❌ | `paused` ⚠️
-
-If stuck on "attempt 1/8" for > 60s → flag Telegram as degraded (Zulip may
-still be fine — do NOT treat as Zulip outage).
-
-**B6: cli_agent_setup_mixin.py Patch Verification**
-
-Check whether the `no-key-required` fallback string exists without the
-LiteLLM-specific guard (only needed when LiteLLM key injection failures are
-suspected). A bare count of the fallback string cannot distinguish a guarded
-occurrence from an unguarded one, so count both the fallback string and the
-LiteLLM guard token:
-
-```bash
-ssh root@<CT> "f=\$(grep -c 'no-key-required' /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); g=\$(grep -c 'LITELLM_API_KEY' /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); echo fallback=\$f guard=\$g"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- bash -c 'f=\$(grep -c no-key-required /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); g=\$(grep -c LITELLM_API_KEY /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); echo fallback=\$f guard=\$g'"
-ssh root@192.168.68.15 "pct exec 111 -- bash -c 'f=\$(grep -c no-key-required /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); g=\$(grep -c LITELLM_API_KEY /usr/local/lib/hermes-agent/hermes_cli/cli_agent_setup_mixin.py 2>/dev/null || echo 0); echo fallback=\$f guard=\$g'"
-```
-
-If `fallback > 0` and `guard == 0` → the fallback string is present without
-the LiteLLM-specific guard, so the patch is missing. If unsure, inspect each
-occurrence with `grep -n -B2 -A2 'no-key-required'` to confirm the guard
-wraps it.
-
 **Platform B Actions**
 
 | Condition | Action |
 |-----------|--------|
-| `zulip.state != "connected"` | Restart gateway (see B2 restart commands below) |
+| `zulip.state != "connected"` | `ssh root@<CT> "pkill -f 'gateway run'; sleep 2; hermes gateway restart"` |
-| No heartbeat in 10min | Restart gateway |
+| No heartbeat in 10min | Same as above |
 | `Failed to finalize` > 50% | Check PATCH API, Zulip server |
 | Response empty/short | Check A2A endpoint / LiteLLM model |
-| `infisical_present: false` | Flag as degraded — log and alert; do NOT auto-restart via the standard command (it cannot inject the key without infisical). Operator may use the Infisical-missing fallback restart below. |
-| `config_valid: false` | Flag as degraded — alert user, gateway running on stale config |
-| Stale pid/lock files detected | Clean files before restart |
-| `no_key_required_count > 0` | Flag as degraded — check LITELLM_API_KEY injection |
-| Telegram stuck on attempt 1/8 | Flag Telegram as degraded, no Zulip action needed |
-
-**Restart Commands**
-
-Standard restart (Infisical present):
-```bash
-ssh root@<CT> "pkill -f 'gateway run'; sleep 2; hermes gateway restart"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- bash -c 'pkill -f \"gateway run\"; sleep 2; systemctl restart hermes-gateway'"
-ssh root@192.168.68.15 "pct exec 111 -- bash -c 'pkill -f \"gateway run\"; sleep 2; systemctl restart hermes-gateway'"
-```
-
-The mechanisms differ by design: Tanko/Mumuni launch the gateway through a
-wrapper loop, so the `hermes gateway restart` CLI is the correct entry point
-(it re-arms the wrapper). Koonimo/Koby run the gateway as a systemd unit
-(`hermes-gateway.service`), so `systemctl restart hermes-gateway` is the
-correct entry point under `pct exec`. Do not swap the two — using the CLI on
-Koonimo/Koby would bypass the unit, and using `systemctl` on Tanko/Mumuni
-would miss the wrapper loop.
-
-Fallback: Infisical missing → start gateway directly from venv with env vars:
-```bash
-ssh root@<CT> "source /usr/local/lib/hermes-agent/venv/bin/activate && \
-  export LITELLM_API_KEY=\$(grep -E '^LITELLM_API_KEY=' /root/.hermes/.env | cut -d= -f2-) && \
-  export ZULIP_API_KEY=\$(grep -E '^ZULIP_API_KEY=' /root/.hermes/.env | cut -d= -f2-) && \
-  cd /root/.hermes && nohup hermes gateway run > logs/gateway-manual-start.log 2>&1 &"
-# pct exec variant:
-ssh root@192.168.68.15 "pct exec 113 -- bash -c 'source /usr/local/lib/hermes-agent/venv/bin/activate; export LITELLM_API_KEY=\$(grep -E ^LITELLM_API_KEY= /root/.hermes/.env | cut -d= -f2-); export ZULIP_API_KEY=\$(grep -E ^ZULIP_API_KEY= /root/.hermes/.env | cut -d= -f2-); cd /root/.hermes; nohup hermes gateway run > logs/gateway-manual-start.log 2>&1 &'"
-ssh root@192.168.68.15 "pct exec 111 -- bash -c 'source /usr/local/lib/hermes-agent/venv/bin/activate; export LITELLM_API_KEY=\$(grep -E ^LITELLM_API_KEY= /root/.hermes/.env | cut -d= -f2-); export ZULIP_API_KEY=\$(grep -E ^ZULIP_API_KEY= /root/.hermes/.env | cut -d= -f2-); cd /root/.hermes; nohup hermes gateway run > logs/gateway-manual-start.log 2>&1 &'"
-```
 
 ### Step 4: Platform C — Agent Zero (kagentz, CT 105 via Docker host .14)
 
@@ -459,7 +278,7 @@ Expected: task ID with "working" status. Poll for completion with `tasks/get`.
 
 Check each agent's log for excessive bot-to-bot chatter:
 - Abiba: `Skipped.*bot msgs` count
-- Tanko/Mumuni/Koonimo/Koby: Repeated DM exchanges between bots
+- Tanko/Mumuni: Repeated DM exchanges between bots
 - kagentz: Adapter log for bot DMs being processed
 
 If any bot processes >50 bot-originated messages in 15min → warning.
@@ -482,14 +301,6 @@ Track via `/tmp/zulip-monitor-debounce` (unix timestamp of last restart).
 
 ## History
 
-### v3.1.0 (2026-07-23) — Koonimo Outage Lessons
-
-Added Koonimo (CT 113) and Koby (CT 111) to Platform B monitoring.
-Added Infisical dependency check, config YAML validation, stale PID/lock
-detection, Telegram adapter health, LiteLLM key injection verification, and
-cli_agent_setup_mixin.py patch verification. Updated restart commands with
-Infisical-missing fallback path.
-
 ### Gen 5 (2026-07-02) — Rate Limit Death Spiral Fix
 
 **Root Cause**: Proactive Queue Rotation at 25 min triggered queue re-registration every cycle. Each re-registration + retry loop (3 attempts) + monitor restart = 8-12 API calls per cycle. Combined with monitor's own API calls (server check, stream alerts), `abiba-bot` hit Zulip's rate limit (429 RATE_LIMIT_HIT). Each restart reset the cycle, creating a death spiral: 111 restarts in 24 hours.

zulip-self-heal.prose.md

@@ -65,7 +65,7 @@ triggers:
 |------|----|------|---------|
 | Zulip server | 192.168.68.19 | root | Docker: `zulip-zulip-1` |
 | Abiba (pi) | localhost | root | PM2: `abiba-zulip` |
-| Mumuni | 192.168.68.123 | root | `hermes gateway restart` |
+| Mumuni | 192.168.68.24 (CT100 abiba) | root | `hermes gateway restart` |
 | Tanko | 192.168.68.122 | jerome | `PATH=$PATH:/home/jerome/.hermes/hermes-agent hermes gateway restart` |
 
 ## Debounce