Add warning that bare PVE hostnames (acerpve, amdpve, etc.) resolve to VPS
via *.dns.sysloggh.net wildcard, not to actual nodes. List IP addresses:
- acerpve 192.168.68.9
- amdpve 192.168.68.15
- storepve 192.168.68.6
- minipve 192.168.68.12
- ocupve 192.168.68.5
Update acerpve example in backup preflight to include address (192.168.68.9).
Fix dmsetup comment to show full field order:
=start =length =thin-pool =transaction-id
=metadata_used/metadata_total =data_used/data_total
remaining fields are flags
Make it clear lvs command is the primary source for percentages, dmsetup is only for error-state check.
Incidents now include addresses: acerpve (192.168.68.9) and amdpve (192.168.68.15).
Fix two errors in the PREFLIGHT section (measured on acerpve 2026-09-15):
1. lvs -o ... pve/data (not pve-data-tpool) - this is the PRIMARY check that yields percentages directly
- Quote the acerpve example: data 29.95% 1.22% <816.21g
2. dmsetup status pve-data-tpool - document fields correctly:
- = transaction ID (99), NOT data_percent
- = metadata used/total blocks
- = data used/total sectors
- Show how to derive percentages if needed
3. Keep the error-state check (grep -q 'Error|Fail') - this is how the incident presented
Everything else stays: 1777 tmpdir requirement with EACCES symptom, incidents as rationale,
GPU-host fact, --output-format json rule, honest note that metadata/snapshot pressure is unproven.
Add documented preflight checks for VM/CT backups on LVM thin-pool hosts:
- dmsetup status pve-data-tpool + lvs to verify data_percent < 90% and metadata_percent < 70%
- Exit 1 if pool shows Error/Fail state (takes down entire VG including host root)
- tmpdir must be mode 1777 (world-traversable) for vzdump archive step
- --output-format json for tasks started from truncating shells
- Document two incidents: acerpve thin-pool VM 101 (twice on 2026-09-13) and amdpve 0700 tmpdir (2026-09-14)
- Note metadata/snapshot-pressure hypothesis is UNPROVEN; preflight is the control
- Document GPU-host fact: VM 101 (llm-gpu) and VM 103 (ocu-llm) have no scheduled backup
- get_response_body() returns first 200 chars of response body (single line)
- On 401/403 model probe: report code + body + key_alias
- Monitor key alias: monitor-20260813 (from /etc/litellm-monitor.env on CT 116)
- Failed connections stay probe-failed, 200 stays plain 200
- Do not turn other statuses into credential faults
Signed-off-by: Abiba
- Replace Infisical retrieval path with proven docker exec + .env note
- State explicitly that master key is NOT in Infisical project=infrastructure
- Keep the live-key check and never-trust-a-literal instruction
- All other corrections from PR #95 preserved
Signed-off-by: Abiba
- probe_http now returns (code, failure_kind) tuple
- Model probes report 'probe-failed: <model> <kind> (Ns timeout)' on 000
- Do not assert a service verdict from a failed probe
- 30s timeout for single-host aliases (RTX 3090 needs long warmup/prefill)
- 60s timeout for syslog-auto pool alias with retry on 000
Signed-off-by: Abiba
- Replace broken --plain flag (prints nothing on CLI 0.43.110) with awk parsing
- Note that --plain is broken so nobody fixes it back
- Replace unproven nginx path with verified direct endpoint http://127.0.0.1:4000/key/list
Signed-off-by: Abiba
- hermes-key-enforcement.prose.md:
- State that expiry must be set EXPLICITLY at creation with duration
- Record that config default is NOT honoured by LiteLLM 1.99.1
- Describe daily audit as AUDIT-ONLY (reports non-expiring and soon-to-expire)
- State that renewal is NOT implemented
- Document exclusions: abiba-pi and all crewmate keys stay WITHOUT expiry
- koby is report-only
- litellm-api-keys.prose.md:
- Replace literal master key with retrieval path (docker exec + infisical)
- State that literal values must never be trusted again (key rotates)
- Add live-key check (200 from /key/list)
Signed-off-by: Abiba
Per defect report 1154.msg (agent-health-gateway-leg-flap-20260913):
1. Add _ssh_retry() helper with one retry at longer timeout (25s)
2. Name probe target explicitly: ssh {user}@{host} <command>
3. Print probe-failed when first attempt fails, then retry
4. Only declare gateway-down after retry fails
5. Make Koby report-only explicit in output
Changes:
- check_agents(): all gateway probes now use _ssh_retry()
- All output lines name the probe target (ssh host:port)
- Koby's report-only status is explicit in output
- Never print bare "gateway down" — always name target and failure kind
Verified: koonimo shows "probe-failed" on first attempt (transient SSH),
retries at 25s, succeeds, reports ✅ koonimo: gw=running
Per defect report 1150.msg:
- Add standing probe rules section (2026-09-14)
- Step 1 (Zulip API): retry once at 25s on 000, print target + code
- Step 2 (Platform A): retry once at 25s on 000, print target + code, note must run on Abiba host
- Apply same shape as infrastructure-monitoring: any HTTP status = ALIVE; only 000/timeout = probe-failed
Verified: all probes now return real HTTP codes (Zulip API 200, Platform A 200, Tanko 401, Agent Zero 401)
Per defect report 1150.msg:
- GPU exporters: probe /metrics (Prometheus scrape target), not bare /
- Grafana: correct port 3001 (not 3000)
- All probes: print target name + full URL + HTTP code
- All probes: retry once at 25s on 000/timeout
- Apply standing rules: any HTTP status = ALIVE; only 000/timeout/refused = probe-failed
Verified: all probes now return real HTTP codes (GPU 200, Grafana 200, Router 200, LiteLLM 301)
Contract design defect: 'uses a non-harness provider' (POLICY) and
'cannot authenticate' (FAULT) were printed as the same violation class.
A policy observation must never be phrased as if the agent were broken.
Changes:
1. Added 'Violation Classification' section to all three contracts
2. Separated POLICY (observation only) from FAULT (requires request-level evidence)
3. Rules:
- Do NOT infer runtime credential resolution from config text alone
- Require request-level evidence before calling a FAULT: observed auth failure
or absence of successful calls
- If calls are succeeding, output is 'POLICY: uses <provider> directly; calls
succeeding' - not a violation
- State what you OBSERVED, not what the field implies
Files changed (3):
- hermes-key-enforcement.prose.md
- hermes-config-template.prose.md
- hermes-agent-baseline.prose.md
The helper was correct but dead code - nothing called it. This commit:
1. Makes the helper runnable standalone: scripts/hermes-reachability-check.sh <host> <pattern> <path>
2. Wires all THREE contracts to it:
- hermes-key-enforcement.prose.md
- hermes-config-template.prose.md
- hermes-agent-baseline.prose.md
3. Each contract now explicitly instructs to run the helper and interpret the three outcomes
4. States that the bug this replaces was deriving reachability from the remote grep's exit code
Files changed (4):
- scripts/hermes-reachability-check.sh (standalone mode added)
- hermes-key-enforcement.prose.md (reachability section added)
- hermes-config-template.prose.md (reachability section added)
- hermes-agent-baseline.prose.md (reachability section added)
Bug: The reachability check used 'ssh ... grep ... || echo unreachable',
which conflated grep's 'no matches found' (exit 1) with SSH failure.
This caused clean hosts to be reported as unreachable.
Fix: Add scripts/hermes-reachability-check.sh with the pattern:
out=$(ssh -o BatchMode=yes root@HOST "grep ... 2>/dev/null; true")
if [ $? -ne 0 ]; then verdict="unreachable"
elif [ -n "$out" ]; then verdict="violation: $out"
else verdict="compliant"
fi
This correctly distinguishes:
- SSH failure (connection/auth/route) -> unreachable
- SSH success + grep found matches -> violation
- SSH success + grep found nothing -> compliant
Evidence: 3 of 4 hosts (Tanko, Mumuni, Koonimo) were reported as
'unreachable' when they were actually compliant. Only Koby (.129)
has a real finding (plaintext key in state snapshot).
Used by: hermes-key-enforcement, hermes-config-template,
hermes-agent-baseline contracts.
1. Timeout fix for pool alias (syslog-auto):
- Single-host aliases (gpu-dense, gpu-vision, strix-moe): 30s timeout
- Pool alias (syslog-auto): 60s timeout, retry once on 000 before failing
- Cold first request to pool alias can take ~13s; 10s was too short
2. Remove DEBUG prints from output:
- Removed 'DEBUG: keylen=...' and 'DEBUG: response=...' lines
- These leaked key inventory to status logs
- Success output now shows only counts (e.g., 'Admin Key List: 10 keys')
Add 'Executor Script' section:
- Run scripts/litellm-health-check.py from the clone
- Hand-rolled probes not acceptable substitute
- Backend-edge checks use internal IP 192.168.68.116, not public URL
- Docker Stats fetched from CT 116 host (127.0.0.1:9324/metrics)
- Admin Key List requires proper quoting for SSH commands
Implements all 11 checks from litellm-health contract:
- Liveliness, Containers, Prometheus, Grafana health probes
- Model probes for gpu-dense, gpu-vision, strix-moe, syslog-auto
- Admin API key list (10 keys), GitHub status, Docker Stats metrics
Fixed quoting for SSH commands and response parsing (dict with 'keys' field).
Backend edge uses internal IP 192.168.68.116, not public URL.
Docker Stats fetched from CT 116 host itself (127.0.0.1:9324/metrics).
All 11 checks passing consistently.
The abiba-zulip-restore.prose.md file incorrectly claimed the default model
was 'deepseek-v4-pro', but /root/.pi/agent/settings.json declares
'defaultModel: syslog-auto' and 'defaultProvider: syslog-harness'.
deepseek-v4-pro is not a servable LiteLLM model name for this fleet.
The only live models are: syslog-auto, gpu-dense, gpu-vision, strix-moe.
Note: The firstmate/pi session talks to DeepSeek through its own
provider (auth.json), NOT through LiteLLM, so no LiteLLM change is
needed to keep firstmate's deepseek usage working.
- harness-litellm container has no curl/wget, so docker exec harness-litellm curl returns empty
- Fix: run curl on CT 116 host (ssh root@192.168.68.116 then curl)
- Add admin-call-failed label for empty/unparseable responses
- Verify: 10 keys found (host-side curl), NO-CURL confirmed in container
- infrastructure-monitoring: Correct Zulip key path to /etc/litellm-monitor.env
(not /etc/zulip-bot.env which doesn't exist); add credential-missing check;
remove unused monitor_key variable
- litellm-health: Clarify that syslog-auto is a fallback pool alias, not a
step 7 probe; monitor key must be scoped for all four aliases
- litellm-health.prose.md: Make monitor key retrieval explicit (ssh from CT 100 to CT 116)
with executable commands; add syslog-auto alias; document credential-missing failure
condition (not bare 401 or 0 keys)
- infrastructure-monitoring.prose.md: Fix Zulip POST probe to retrieve keys from CT 116
via ssh instead of sourcing local env file that doesn't exist on executor host
- Verify model inference probes return 200 for gpu-dense, gpu-vision, strix-moe,
syslog-auto with corrected credential retrieval
- Remove retired names (qwen3.6-27B-code, qwen3.6-35B-udq4) from live alias claims
- Update Strix Halo model to Carnice-Qwen3.6-MoE-35B-A3B-Q4_K_M.gguf (strix-moe, 256K ctx)
- Fix litellm-health step 7 probe to gpu-vision (monitor key scoped)
- Move qwen3.6-27B-code/35B-udq4 from raw-but-live to non-resolving in audit
- Fold in pm2-self-heal: remove spoton-service (live PM2 set is 4/4)
- Update hermes templates, key enforcement, timeout tables to live names
Intent requires a production run log, not only the unit-level dry run. This is a real
scan of the live 25-entry fleet through scripts/disk-gc-plan.py: CT 111 (tdunna) at 84%
AMBER is alerted as report-only and no gc-executor row is emitted for it; the owned hosts
acerpve .9 (77%) and amdpve .15 (76%) still receive gc-executor. No GC command was run
against 192.168.68.129.
root
abiba-bot