fix: PR #107 review fixes — cron cadence + gateway log health check

FAIL 1: Cron cadence was */10 * * * * (every 10 min) but the real crontab
on CT 100 is 35 2,6,10,14,18,22 * * * (every 4 hours at :35). Fixed in
frontmatter, body, and Continuity section. Added 4-hour rationale note.

FAIL 2: Added gateway log health to the list of checks (frontmatter +
Strategies section). Added note that script may perform additional
diagnostics beyond the seven contract checks.

.gitignore

@@ -1 +1,2 @@
 __pycache__/
+state/host-disk-bands.json

agent-health-check.prose.md

@@ -0,0 +1,104 @@
+---
+kind: responsibility
+name: agent-health-check
+description: >
+  Consolidated agent health verification for the LiteLLM + GPU + Zulip +
+  gateway fleet. Wraps scripts/agent-health-check.py (v4). Runs every 4 hours
+  via cron and on-demand via "run contract: agent-health-check". Verifies:
+  LiteLLM key validity, GPU port conflicts, agent Zulip streaming, gateway
+  liveness, CT liveness, gateway log health, config YAML integrity,
+  wrapper/CLI integrity, vault secret non-emptiness. NEVER restarts anything.
+title: Agent Health Check — Consolidated
+version: 1.0.0
+runtime_contract: 2
+agent: abiba
+---
+
+# Agent Health Check
+
+Consolidated health verification for the LiteLLM + GPU + Zulip + gateway fleet.
+Runs every 4 hours (2, 6, 10, 14, 18, 22 UTC at :35) via cron (`35 2,6,10,14,18,22 * * *`) and on-demand. Never restarts anything — detects and reports only.
+
+**Cadence rationale** (2026-08-28 decision): monitoring dispatches moved from hourly to every 4 hours to reduce probe load on GPU hosts while keeping detection latency acceptable (up to 4 hours).
+
+## Requires
+
+- **LiteLLM admin key** for key validation (retrieved from `/root/.pi/agent/env.sh`)
+- **SSH access** to GPU hosts (.8, .110, .15) and agent CTs (.122, .129, .114, .24)
+- **Python 3** for script execution
+- **Network access** to LiteLLM (:4000), GPU exporters (:9400), and gateway endpoints
+
+## Maintains
+
+- last_check: timestamp — When the last full diagnostic ran
+- overall_severity: "healthy" | "degraded" | "critical"
+- liteLLM_keys: map of agent → key validity
+- gpu_ports: map of host → port conflict status
+- agents: map of agent → streaming health + gateway liveness
+- ct_liveness: map of CT → active status
+- config_integrity: map of config file → valid/invalid
+
+## Execution
+
+### check-health
+
+**RUN LIVE, NEVER ECHO — every dispatch must execute the script with real tool
+calls; never repeat a prior report unless a live probe fails.**
+
+```bash
+# Run the consolidated health check script
+python3 /root/scripts/agent-health-check.py --json
+```
+
+**Report format**: Begin every report with the **absolute path the script
+executed from** so a stale-consumer report is distinguishable from a real fault
+at read time. Summarize actual results from each check. Apply the standing probe
+rules: any HTTP status = ALIVE; only 000/timeout/refused = probe-failed.
+
+**Expected output**: JSON with `overall_severity` field. If `healthy`, report
+"Agent health check: OK". If `degraded` or `critical`, report the specific
+failures and their severity.
+
+### Probe Shape (per standing rules from 1150.msg)
+
+1. **Any HTTP status means ALIVE.** 200, 301, 302, 401, 403, 404 all prove the
+   service answered — report the code, never "down". A redirect is not a failure.
+   Only a failed CONNECTION (curl status 000, timeout, refused) is a failed probe.
+2. **A failed probe is never a service verdict.** Print
+   `probe-failed: <target> <kind>` naming the exact URL/host/port and the failure
+   kind (timeout, refused, no-route, dns), retry once at a longer timeout, and only
+   then report.
+3. **Say which probe produced each number.** "Grafana: 000" is unusable;
+   "Grafana http://192.168.68.116:3001/api/health -> connection timeout after 10s
+   (retried at 25s: also timeout)" is actionable.
+
+## Strategies
+
+### When LiteLLM keys are invalid
+Report the specific agent + key name. Do not attempt to fix — credential
+rotation is a separate operation.
+
+### When GPU port conflicts are detected
+Report the conflicting ports and processes. Do not kill processes — that's a
+destructive action requiring captain approval.
+
+### When gateway liveness is degraded
+Report the specific CT + gateway status. Do not restart unless the restart
+debounce window has passed.
+
+### When CT liveness is down
+Report the specific CT. Do not restart — that's a destructive action.
+
+### When config YAML is invalid
+Report the specific file + parse error. Do not fix — that's a config change.
+
+### When gateway log health is degraded
+Report the specific gateway + log health status (error patterns, stale connections, connectivity issues). Do not restart — that's a destructive action.
+
+Note: the script may perform additional diagnostics beyond the seven contract checks listed under Execution.
+
+## Continuity
+
+- **Every 4 hours** (2, 6, 10, 14, 18, 22 UTC at :35): Scheduled cron check while Abiba is running
+- **On `agent-health` command**: Run on-demand and report to user
+- **On critical alert**: Escalate to relay message immediately

disk-gc-threat-response.prose.md

@@ -43,7 +43,7 @@ Docker hosts get special attention:
 
 > **Note:** CT 118 is now jdownloader (active on storepve). CT 101 (llm-gpu) → bare metal .8, CT 103 (ocu-llm) → bare metal .110.
 
-## Threat Levels
+## Threat Levels (GUEST filesystems)
 
 | Level | Threshold | Response | Escalation |
 |-------|-----------|----------|------------|
@@ -53,6 +53,39 @@ Docker hosts get special attention:
 | **CRITICAL** | ≥ 95% | Aggressive GC + emergency cleanup | Zulip + relay to Kwame |
 | **FULL** | 100% (df shows 100%) | Stop writes, manual intervention | Call/Telegram Kwame |
 
+## Host Filesystem Thresholds (HOST nodes — separate bands from guest bands)
+
+Host filesystems have their own risk profile and their own bands. A host root near full is a real risk (backup staging writes to it, thin-pool metadata pressure), a media volume near full is a capacity decision for the owner, and the backup datastore near full breaks backups. These are **report-only** — no automatic deletion of media or datastore content ever.
+
+| Level | Threshold | Response | Escalation |
+|-------|-----------|----------|------------|
+| **HOST-WARN** | 85% | Name the volume + % + absolute free space in the scan output | None |
+| **HOST-AMBER** | 90% | Name the volume + % + absolute free space; flag for owner attention | Zulip DM to owner (state-change only) |
+| **HOST-RED** | 95% | Name the volume + % + absolute free space; flag for immediate owner attention | Zulip DM + channel alert (state-change only) |
+
+**Escalations are STATE-CHANGE driven, not per-run.** A volume alerts ONCE when it enters a higher band (GREEN->WARN, WARN->AMBER, AMBER->RED) and ONCE when it drops back down (a recovery notice). While a volume stays in the same band, it is reported in the scan output only — no DM, no channel alert. This prevents the same 96% easystore2 from re-DMing the owner on every 6-hour scan and drowning a real warning in noise.
+
+**State lives in a small JSON state file:** the scanner resolves it to an absolute path from the script's location — `$(dirname "$0")/state/host-disk-bands.json` (i.e., the `state/` directory next to the `scripts/` directory in the prose-contracts repo). The state file is gitignored runtime state — the scanner creates it on first run. Keyed by `host/volume` → last-seen band. The scanner reads the prior band, compares to the current band, and DMs only on a transition. The state file is written after every scan. (Chosen over a periodic digest because the scan already runs every 6h and a transition is genuinely new, actionable state that warrants an immediate DM — but only once.)
+
+**Volume naming rule:** Every host line MUST name the volume and what lives on it. Example output:
+
+```
+storepve /media/easystore2 (media): 96% (3.5T/3.7T, 177G free) -> HOST-RED
+storepve /media/reanim (media): 86% (797G/932G, 135G free) -> HOST-WARN
+storepve /media/mediastore (media): 77% (5.3T/7.3T, 1.6T free) -> GREEN
+storepve /dev/mapper/pve-root (host-root): 81% (73G/94G, 17G free) -> GREEN
+storepve tank (pbs-datastore): 1% (128K/12T, 12T free) -> GREEN
+```
+
+**First-run behavior:** When the state file does not yet exist (first scan), the current band of every volume is recorded as the baseline WITHOUT alerting — a first run would otherwise DM every already-elevated volume at once. From the second run onward, transitions alert.
+
+**Action classes by volume type:**
+- **host-root**: near full = real risk (backup staging, thin-pool metadata, journald). HOST-AMBER or above → owner must investigate.
+- **media** (/media/*): near full = capacity decision for the owner. HOST-AMBER or above → report only, never auto-delete.
+- **pbs-datastore** (tank, ZFS): near full = breaks Proxmox Backup Server. HOST-RED → escalate immediately.
+
+**Justification (measured 2026-09-15, firstmate):** storepve (192.168.68.6) shows /media/easystore2 at 96%, /media/reanim at 86%, /dev/mapper/pve-root at 81%, and tank at 1%. The previous scan reported "0/19 guests >80%, no GC action needed" while easystore2 sat at 96% — the host filesystems were printed but never banded and never acted on. Two incidents this weekend (amdpve host root filled during container backup staging, acerpve root went read-only when its thin pool errored) showed the host filesystem is the thing that breaks, not the guest's.
+
 ## Requires
 
 - SSH access to all Docker hosts (matrix from infrastructure-control pattern)
@@ -128,6 +161,10 @@ from the `report_only_guests` YAML block above.
 
 ## Execution
 
+### Host filesystems: report-only, NEVER auto-delete
+
+Host filesystems are always report-only — no automatic deletion of media or datastore content. A host root near full requires investigation by the owner, but the executor must never delete content on a host filesystem. This restriction is absolute.
+
 ### Hard gate: report-only guests (READ THIS BEFORE RUNNING GC)
 
 **CT 111 / hostname `tdunna` / 192.168.68.129 is DETECT-AND-REPORT-ONLY.** It belongs to Theo.
@@ -243,6 +280,12 @@ done
 
 ## Alert Templates
 
+### HOST-WARN / HOST-AMBER / HOST-RED (host filesystems, report-only)
+```
+⚠️ Host Disk — {hostname} {volume} ({volume_type}): {pct}% ({used}/{total}, {free} free) -> {level}
+Action: {volume_type-specific action}
+```
+
 ### AMBER (75-84%)
 ```
 ⚠️ Disk GC — {hostname} (CT {id}) at {pct}% ({used}G/{total}G)

litellm-health.prose.md

@@ -19,7 +19,7 @@ description: >
     Scraped by Prometheus with Bearer master key; endpoint returns 307 → /metrics/.
   - Alertmanager (harness-alertmanager :9093) + zulip-bridge (:9102) deliver
     firing alerts to #agent-hub > alerts-infra via abiba-bot. Added 2026-08-09.
-  - Prometheus node job covers ALL 5 PVE nodes (.5/.6/.9/.12/.15:9100).
+  - Prometheus node job covers 6 PVE nodes (.4/.5/.6/.9/.12/.15:9100). Note: .4:9100 is a DEAD target (no route, down for weeks, not a live node).
 ---
 
 ## Architecture (v4.0.0 — Direct: nginx → LiteLLM → GPU)

pm2-self-heal.prose.md

@@ -2,6 +2,10 @@
 kind: responsibility
 name: pm2-self-heal
 description: >
+  PM2 process health check for abiba-telegram, abiba-zulip, gitea-runner, and zulip-watchdog.
+  gpu-monitor is systemd-managed (gpu-monitor.service), NOT PM2.
+  gpu-watchdog is decommissioned and folded into gpu-monitor.service.
+  gitea-runner is KEPT. abiba-zulip is KEPT (online for days).
 ---
 
 ## Maintains
@@ -35,6 +39,9 @@ description: >
   when `TEL_RESTARTS > 1000` even if the process reports "online" — catches a quiet
   crash-loop that never toggles status to "stopped"/"errored" (e.g. the 10k-restarts
   spoton incident). Alerts include the restart count.
+- **AS-BUILT (2026-09-15)**: spoton-service was deleted with its app; the live PM2 set is
+  four processes (abiba-telegram, abiba-zulip, gitea-runner, zulip-watchdog). The spoton
+  reference above is historical context for the crash-loop guard, not a live process.
 - **Escalate**: Only when restarts > 30 — alerts to Zulip DM
 - **Historical fix**: Previous cycles were caused by abiba-zulip extension's
   stuck detection (STUCK_THRESHOLD_MS was 30min, raised to 4h in v2).

scripts/disk-gc-scan.py

@@ -153,6 +153,25 @@ GPU_HOSTS = [
 CONNECT_TIMEOUT = 5
 SSH_OPTS = "-o BatchMode=yes -o ConnectTimeout=" + str(CONNECT_TIMEOUT)
 
+# Host filesystem thresholds (from contract)
+HOST_THRESHOLDS = {
+    "WARN": 85,
+    "AMBER": 90,
+    "RED": 95,
+}
+
+# State file path (absolute, so execution context doesn't matter)
+STATE_FILE = pathlib.Path(__file__).resolve().parent.parent / "state" / "host-disk-bands.json"
+
+# PVE nodes to probe for host filesystems
+HOST_NODES = [
+    {"hostname": "acerpve", "ip": "192.168.68.9"},
+    {"hostname": "amdpve", "ip": "192.168.68.15"},
+    {"hostname": "storepve", "ip": "192.168.68.6"},
+    {"hostname": "minipve", "ip": "192.168.68.12"},
+    {"hostname": "ocupve", "ip": "192.168.68.5"},
+]
+
 
 def run_cmd(cmd: str, timeout: int = 30) -> tuple[int, str, str]:
     """Run a command and return (exit_code, stdout, stderr)."""
@@ -298,6 +317,151 @@ def scan_fleet() -> list[dict]:
     return results
 
 
+def classify_band(usage_pct: float) -> str:
+    """Classify a percentage into a band."""
+    if usage_pct >= HOST_THRESHOLDS["RED"]:
+        return "HOST-RED"
+    elif usage_pct >= HOST_THRESHOLDS["AMBER"]:
+        return "HOST-AMBER"
+    elif usage_pct >= HOST_THRESHOLDS["WARN"]:
+        return "HOST-WARN"
+    else:
+        return "GREEN"
+
+
+def probe_host_filesystems() -> tuple[list[dict], dict[str, str]]:
+    """Probe host filesystems on all PVE nodes.
+    
+    Returns:
+        - List of host filesystem results
+        - Dict of volume_key -> current_band (for state file)
+    """
+    results = []
+    current_bands = {}
+    
+    for node in HOST_NODES:
+        ip = node["ip"]
+        hostname = node["hostname"]
+        
+        # Probe df for host filesystems
+        probe_cmd = f'ssh {SSH_OPTS} root@{ip} "df -hP / /media/* tank 2>/dev/null | tail -n +2"'
+        exit_code, stdout, stderr = run_cmd(probe_cmd, timeout=15)
+        
+        if exit_code != 0:
+            results.append({
+                "target": f"{hostname} ({ip})",
+                "hostname": hostname,
+                "ip": ip,
+                "reachable": False,
+                "volumes": [],
+                "probe_cmd": probe_cmd,
+                "failure_kind": "ssh-error",
+            })
+            continue
+        
+        # Parse df output and classify each volume
+        volumes = []
+        for line in stdout.splitlines():
+            parts = line.split()
+            if len(parts) < 6:
+                continue
+            
+            dev, size, used, avail, pct_str, mount = parts[:6]
+            pct = float(pct_str.rstrip("%"))
+            band = classify_band(pct)
+            
+            # Volume type classification
+            if mount.startswith("/media/"):
+                vol_type = "media"
+            elif mount == "/" or "pve" in dev:
+                vol_type = "host-root"
+            elif mount == "tank" or "tank" in mount:
+                vol_type = "pbs-datastore"
+            else:
+                vol_type = "other"
+            
+            # Volume key for state file (host/volume)
+            volume_key = f"{hostname}/{mount}"
+            current_bands[volume_key] = band
+            
+            volumes.append({
+                "mount": mount,
+                "device": dev,
+                "size": size,
+                "used": used,
+                "avail": avail,
+                "pct": pct,
+                "band": band,
+                "type": vol_type,
+            })
+        
+        results.append({
+            "target": f"{hostname} ({ip})",
+            "hostname": hostname,
+            "ip": ip,
+            "reachable": True,
+            "volumes": volumes,
+            "probe_cmd": probe_cmd,
+            "failure_kind": None,
+        })
+    
+    return results, current_bands
+
+
+def read_state_file() -> Optional[dict[str, str]]:
+    """Read the state file if it exists."""
+    if not STATE_FILE.exists():
+        return None
+    try:
+        with open(STATE_FILE) as f:
+            return json.load(f)
+    except (json.JSONDecodeError, IOError) as e:
+        print(f"⚠️  State file exists but unreadable: {e}", file=sys.stderr)
+        return {}
+
+
+def write_state_file(bands: dict[str, str]) -> None:
+    """Write the state file."""
+    STATE_FILE.parent.mkdir(parents=True, exist_ok=True)
+    try:
+        with open(STATE_FILE, "w") as f:
+            json.dump(bands, f, indent=2)
+    except IOError as e:
+        print(f"⚠️  State file write failed: {e}", file=sys.stderr)
+
+
+def detect_transitions(current_bands: dict[str, str], prior_bands: Optional[dict[str, str]]) -> list[dict]:
+    """Detect band transitions (current vs. prior)."""
+    if prior_bands is None:
+        # First run — no transitions, just establish baseline
+        return []
+    
+    transitions = []
+    # Check for volumes that moved to a higher band (escalation)
+    for volume, current_band in current_bands.items():
+        prior_band = prior_bands.get(volume, "GREEN")
+        
+        # Band ordering: GREEN < HOST-WARN < HOST-AMBER < HOST-RED
+        band_order = {"GREEN": 0, "HOST-WARN": 1, "HOST-AMBER": 2, "HOST-RED": 3}
+        
+        if band_order[current_band] > band_order[prior_band]:
+            transitions.append({
+                "type": "escalation",
+                "volume": volume,
+                "from": prior_band,
+                "to": current_band,
+            })
+        elif band_order[current_band] < band_order[prior_band]:
+            transitions.append({
+                "type": "recovery",
+                "volume": volume,
+                "from": prior_band,
+                "to": current_band,
+            })
+    
+    return transitions
+
+
 def render_results(results: list[dict]) -> str:
     """Render scan results in human-readable format."""
     lines = []
@@ -316,22 +480,88 @@ def render_results(results: list[dict]) -> str:
     return "\n".join(lines)
 
 
+def render_host_results(results: list[dict], transitions: list[dict], prior_bands: Optional[dict[str, str]]) -> str:
+    """Render host filesystem results in human-readable format."""
+    lines = []
+    lines.append("")
+    lines.append("=== Host Filesystem Bands ===")
+    lines.append("")
+    
+    # Render transitions first (they're the actionable alerts)
+    if prior_bands is None:
+        lines.append("  (first run — recording baseline, no alerts)")
+    elif not transitions:
+        lines.append("  (no band changes since last scan)")
+    else:
+        for t in transitions:
+            volume, from_band, to_band = t["volume"], t["from"], t["to"]
+            if t["type"] == "escalation":
+                lines.append(f"  ⚠️  {volume}: {from_band} → {to_band} (ESCALATION)")
+            else:
+                lines.append(f"  ✅ {volume}: {from_band} → {to_band} (RECOVERY)")
+    
+    # Render all volumes with their bands
+    lines.append("")
+    for node_result in results:
+        if not node_result["reachable"]:
+            lines.append(f"  ❌ {node_result['target']}: UNREACHABLE ({node_result['failure_kind']})")
+            continue
+        
+        lines.append(f"  {node_result['target']}:")
+        for vol in node_result["volumes"]:
+            lines.append(f"    {vol['mount']} ({vol['type']}): {vol['pct']}% ({vol['used']}/{vol['size']}, {vol['avail']} free) -> {vol['band']}")
+    
+    return "\n".join(lines)
+
+
 def main() -> int:
     import argparse
 
-    ap = argparse.ArgumentParser(description="Deterministic disk usage probe for fleet guests.")
+    ap = argparse.ArgumentParser(description="Deterministic disk usage probe for fleet guests and host filesystems.")
     ap.add_argument("--json", action="store_true", help="machine-readable output")
+    ap.add_argument("--hosts-only", action="store_true", help="scan host filesystems only")
+    ap.add_argument("--guests-only", action="store_true", help="scan guests only (skip host filesystems)")
     args = ap.parse_args()
 
-    results = scan_fleet()
+    # Scan guests (unless --hosts-only)
+    guest_results = []
+    if not args.hosts_only:
+        guest_results = scan_fleet()
+
+    # Scan host filesystems (unless --guests-only)
+    host_results = []
+    current_bands = {}
+    if not args.guests_only:
+        host_results, current_bands = probe_host_filesystems()
+        
+        # Read prior state and detect transitions
+        prior_bands = read_state_file()
+        transitions = detect_transitions(current_bands, prior_bands)
+        
+        # Write new state
+        write_state_file(current_bands)
+    else:
+        prior_bands = None
+        transitions = []
 
     if args.json:
-        print(json.dumps(results, indent=2))
+        # JSON output
+        output = {
+            "guests": guest_results,
+            "hosts": host_results,
+            "transitions": transitions,
+            "prior_bands": prior_bands,
+        }
+        print(json.dumps(output, indent=2))
     else:
-        print(render_results(results))
+        # Human-readable output
+        if guest_results:
+            print(render_results(guest_results))
+        
+        if host_results:
+            print(render_host_results(host_results, transitions, prior_bands))
 
-    # Exit 0 if all guests probed (reachable or not), 1 if any probe error
-    # (a probe error means the probe itself failed, not just that the guest was unreachable)
+    # Exit 0 if all probed (reachable or not), 1 if any probe error
     return 0