fix: skip Hermes config/wrapper integrity checks for tanko (DSH)

check_config_integrity and check_wrapper_integrity still probed tanko (CT 112)
for Hermes-only artifacts (/root/.hermes/config.yaml, the hermes CLI wrapper)
that no longer exist since tanko moved to DSH on 2026-08-27. This caused false
FAILs in the agent health check. Both now skip tanko via runtime=dsh.

.gitignore

@@ -0,0 +1 @@
+__pycache__/

AGENTS.md

@@ -67,10 +67,10 @@ Two incidents taught us this:
 
 | Contract | Sensitivity | Who can change |
 |----------|------------|----------------|
-| `infrastructure-control.prose.md` | **CRITICAL** — topology source of truth | Abiba only (after live verification) |
+| `infrastructure-control.prose.md` | **CRITICAL** — topology source of truth | Abiba, Tanko (Tanko maintains its own CT row) |
 | `proxmox-monitor.prose.md` | **CRITICAL** — deployed monitoring | Abiba only |
 | `hermes-config-template.prose.md` | **HIGH** — all agent configs | Abiba, Mumuni, Tanko |
-| `zulip-health.prose.md` | **HIGH** — agent communication | Abiba, Mumuni |
+| `zulip-health.prose.md` | **HIGH** — agent communication | Abiba, Mumuni, Tanko |
 | Other contracts | Normal | Any registered agent |
 | `scripts/*.sh` | **HIGH** — runtime scripts | Abiba only |
 

README.md

@@ -20,7 +20,8 @@ An agent ran `pct set` without checking `pct config` first and changed the IP
 to the wrong value, breaking Zulip. The staleness was harmless until acted on.
 
 **Layer 3 enforcement — the `safe-mutate` wrapper** (deployed on all 5 agents:
-Abiba, Tanko, Mumuni, Koby, Koonimo). ALL infrastructure mutations MUST go
+Abiba, Tanko, Mumuni, Koby, Koonimo — Tanko runs on DSH/DeepSeek Harness since
+2026-08-27 but safe-mutate enforcement still applies). ALL infrastructure mutations MUST go
 through `safe-mutate`. Raw `sed -i`, `pct set`, `docker compose up
 --force-recreate`, `kill`, `rm` on infrastructure outside `safe-mutate` is an
 auditable protocol violation. The wrapper runs a verify command, optionally
@@ -137,7 +138,7 @@ Encode topology, architectural decisions, and lessons. You read them before plan
 
 | Contract | Description |
 |---|---|
-| `infrastructure-control` | Full topology and control pattern: 6-node Proxmox cluster, 3 Docker ecosystems, NFS storage, network verification, IP-first configuration doctrine. Live-state fields marked `VERIFY-BEFORE-USE`. |
+| `infrastructure-control` | Full topology and control pattern: 5-node Proxmox cluster, 3 Docker ecosystems, NFS storage, network verification, IP-first configuration doctrine. Live-state fields marked `VERIFY-BEFORE-USE`. |
 | `pi-approval-architecture` | pi's approval model vs Hermes, available commands, architectural constraints. |
 | `zulip-adapter-lessons` | Failure modes, fixes, and patterns from building the pi Zulip extension and Hermes Zulip plugin. |
 

audit-hermes-config.py

@@ -0,0 +1,230 @@
+#!/usr/bin/env python3
+"""
+Hermes Config Audit — validates a live config.yaml against the prose contract rules.
+
+Usage:
+    python3 audit-hermes-config.py <config.yaml>
+    python3 audit-hermes-config.py /root/.hermes/config.yaml
+
+Exit codes:
+    0 = all checks pass
+    1 = one or more contract violations found
+
+This script encodes every rule from hermes-config-template.prose.md so config
+changes can be verified before and after application. It is the single automated
+enforcement layer for the prose contract.
+
+Contract: /root/prose-contracts/hermes-config-template.prose.md
+"""
+
+import sys
+import yaml
+
+VIOLATIONS = []
+WARNINGS = []
+PASSES = []
+
+
+def check(condition, rule, message):
+    if condition:
+        PASSES.append(f"[{rule}] {message}")
+    else:
+        VIOLATIONS.append(f"[{rule}] {message}")
+
+
+def warn(rule, message):
+    WARNINGS.append(f"[{rule}] {message}")
+
+
+def audit(path):
+    with open(path) as f:
+        cfg = yaml.safe_load(f)
+
+    model = cfg.get("model", {})
+    fb = cfg.get("fallback_providers", {})
+    comp = cfg.get("compression", {})
+    aux = cfg.get("auxiliary", {})
+    deleg = cfg.get("delegation", {})
+    cps = cfg.get("custom_providers", [])
+    cp = cps[0] if cps else {}
+
+    # --- Rule 3: API Keys via Environment ---
+    check(
+        model.get("api_key") in ("", None),
+        "Rule 3",
+        f"model.api_key must be empty (got {model.get('api_key')!r}) — keys via env var, not hardcoded",
+    )
+    check(
+        model.get("api_key_env") == "LITELLM_API_KEY",
+        "Rule 3",
+        f"model.api_key_env must be LITELLM_API_KEY (got {model.get('api_key_env')!r})",
+    )
+
+    # --- Rule 5: Main Config Base URL ---
+    expected_base = "http://192.168.68.116/v1"
+    check(
+        model.get("base_url") == expected_base,
+        "Rule 5",
+        f"model.base_url must be {expected_base} (got {model.get('base_url')!r}) — /v1 not /litellm/v1",
+    )
+
+    # --- Rule 6: max_tokens Is Required ---
+    check(
+        isinstance(model.get("max_tokens"), int) and model.get("max_tokens") <= 8192,
+        "Rule 6",
+        f"model.max_tokens must be set and <= 8192 (got {model.get('max_tokens')!r}) — thermal safety",
+    )
+
+    # --- Rule 7: Auxiliary Model Consistency ---
+    check(
+        comp.get("model") == "syslog-auto",
+        "Rule 7",
+        f"compression.model must be syslog-auto (got {comp.get('model')!r}) — auto-routing to prevent Strix Halo overload",
+    )
+    aux_comp = aux.get("compression", {})
+    check(
+        aux_comp.get("model") == "syslog-auto",
+        "Rule 7",
+        f"auxiliary.compression.model must be syslog-auto (got {aux_comp.get('model')!r}) — must match compression.model",
+    )
+
+    # --- Rule 8: GPU Workload Distribution ---
+    check(
+        aux.get("vision", {}).get("model") == "gpu-light",
+        "Rule 8",
+        f"auxiliary.vision.model must be gpu-light (got {aux.get('vision', {}).get('model')!r}) — RTX 5070 stable alias",
+    )
+    check(
+        aux.get("web_extract", {}).get("model") == "gpu-light",
+        "Rule 8",
+        f"auxiliary.web_extract.model must be gpu-light (got {aux.get('web_extract', {}).get('model')!r}) — RTX 5070 stable alias",
+    )
+
+    # --- Rule 9: Compression Threshold ---
+    check(
+        comp.get("threshold") == 0.65,
+        "Rule 9",
+        f"compression.threshold must be 0.65 for 128K models (got {comp.get('threshold')!r})",
+    )
+    check(
+        comp.get("max_context_window") == 131072,
+        "Rule 9",
+        f"compression.max_context_window must be 131072 (got {comp.get('max_context_window')!r}) — matches 128K GPU capacity",
+    )
+
+    # --- Rule 10: Default Model Must Be syslog-auto ---
+    check(
+        model.get("default") == "syslog-auto",
+        "Rule 10",
+        f"model.default must be syslog-auto (got {model.get('default')!r}) — auto-routing default",
+    )
+
+    # --- Rule 14: Provider Name Must Match custom_providers Name ---
+    check(
+        model.get("provider") == "harness",
+        "Rule 14",
+        f"model.provider must be 'harness' (got {model.get('provider')!r}) — NOT 'custom'. "
+        f"provider: custom causes generic resolution path that ignores key_env → 'no-key-required' → 401",
+    )
+    check(
+        comp.get("provider") == "harness",
+        "Rule 14",
+        f"compression.provider must be 'harness' (got {comp.get('provider')!r})",
+    )
+    for aux_name in ("vision", "web_extract", "compression"):
+        aux_provider = aux.get(aux_name, {}).get("provider")
+        check(
+            aux_provider == "harness",
+            "Rule 14",
+            f"auxiliary.{aux_name}.provider must be 'harness' (got {aux_provider!r})",
+        )
+    check(
+        deleg.get("provider") == "harness",
+        "Rule 14",
+        f"delegation.provider must be 'harness' (got {deleg.get('provider')!r})",
+    )
+    check(
+        fb.get("provider") == "deepseek",
+        "Rule 14",
+        f"fallback_providers.provider must be 'deepseek' (got {fb.get('provider')!r}) — "
+        f"true fallback diversity, not same endpoint as primary",
+    )
+    check(
+        fb.get("model") == "deepseek-v4-flash",
+        "Rule 14",
+        f"fallback_providers.model must be 'deepseek-v4-flash' (got {fb.get('model')!r})",
+    )
+    check(
+        fb.get("api_key_env") == "DEEPSEEK_API_KEY",
+        "Rule 14",
+        f"fallback_providers.api_key_env must be DEEPSEEK_API_KEY (got {fb.get('api_key_env')!r})",
+    )
+
+    # --- custom_providers sanity ---
+    check(
+        cp.get("name") == "harness",
+        "custom_providers",
+        f"custom_providers[0].name must be 'harness' (got {cp.get('name')!r})",
+    )
+    check(
+        cp.get("key_env") == "LITELLM_API_KEY" or cp.get("api_key_env") == "LITELLM_API_KEY",
+        "custom_providers",
+        f"custom_providers[0] must have key_env or api_key_env = LITELLM_API_KEY "
+        f"(got key_env={cp.get('key_env')!r}, api_key_env={cp.get('api_key_env')!r})",
+    )
+    check(
+        cp.get("base_url", "").endswith("/v1"),
+        "custom_providers",
+        f"custom_providers[0].base_url must end with /v1 (got {cp.get('base_url')!r})",
+    )
+
+    # --- No raw model names (Rule 7/8 spirit) ---
+    raw_names = {"gemma-4-12b", "qwen3.6-27B-code", "qwen3.6-35B-udq4", "ornith-1.0-35b"}
+    for section_path, section_dict in [
+        ("model", model), ("compression", comp),
+        ("auxiliary.vision", aux.get("vision", {})),
+        ("auxiliary.web_extract", aux.get("web_extract", {})),
+        ("auxiliary.compression", aux.get("compression", {})),
+        ("delegation", deleg),
+    ]:
+        m = section_dict.get("model", "")
+        if m in raw_names:
+            warn(
+                "Rule 7/8",
+                f"{section_path}.model = {m!r} — raw model name, use stable alias instead "
+                f"(gpu-light, gpu-dense, strix-moe, syslog-auto)",
+            )
+
+    # --- Report ---
+    print(f"{'=' * 60}")
+    print(f"Hermes Config Audit: {path}")
+    print(f"{'=' * 60}")
+    print(f"\n✅ PASSED ({len(PASSES)}):")
+    for p in PASSES:
+        print(f"  ✅ {p}")
+
+    if WARNINGS:
+        print(f"\n⚠️  WARNINGS ({len(WARNINGS)}):")
+        for w in WARNINGS:
+            print(f"  ⚠️  {w}")
+
+    if VIOLATIONS:
+        print(f"\n❌ VIOLATIONS ({len(VIOLATIONS)}):")
+        for v in VIOLATIONS:
+            print(f"  ❌ {v}")
+        print(f"\n{'=' * 60}")
+        print(f"RESULT: FAIL — {len(VIOLATIONS)} violation(s) must be fixed")
+        print(f"{'=' * 60}")
+        return 1
+    else:
+        print(f"\n{'=' * 60}")
+        print(f"RESULT: PASS — all contract rules satisfied")
+        print(f"{'=' * 60}")
+        return 0
+
+
+if __name__ == "__main__":
+    if len(sys.argv) < 2:
+        print("Usage: python3 audit-hermes-config.py <config.yaml>")
+        sys.exit(2)
+    sys.exit(audit(sys.argv[1]))

build-zulip-plugin.prose.md

@@ -45,9 +45,10 @@ description: >
 ## Status
 
 **Active** — for Hermes agents only. This plugin is NOT retired. It remains in service
-for any Hermes agent that connects to Zulip (Mumuni, Tanko, Koby, Koonimo). The pi
+for Hermes agents that connect to Zulip (Mumuni, Koby, Koonimo). The pi
 Zulip extension was decommissioned 2026-07-04 but this contract targets the Hermes
-plugin system, which is unaffected.
+plugin system, which is unaffected. **Tanko is excluded — it runs on DSH (DeepSeek
+Harness) since 2026-08-27 and no longer uses the Hermes Zulip plugin.**
 
 ## Parameters
 

contract-registry.yaml

@@ -584,7 +584,7 @@ contracts:
       verify: curl -sf https://git.sysloggh.net/api/v1/version
       expect: 200 OK
     - check: SearXNG reachable
-      verify: curl -sf http://192.168.68.17:8080
+      verify: curl -sf http://192.168.68.7:8888
       expect: 200 OK
     artifact: infrastructure health report
   receipt:

cron-prompts-review.md

@@ -356,7 +356,7 @@ Postconditions to verify:
   },
   {
     "check": "SearXNG reachable",
-    "verify": "curl -sf http://192.168.68.17:8080",
+    "verify": "curl -sf http://192.168.68.7:8888",
     "expect": "200 OK"
   }
 ]

disk-gc-threat-response.prose.md

@@ -35,8 +35,7 @@ Docker hosts get special attention:
 | All other CTs | — | LOW — no Docker | apt clean, log rotate |
 | GPU bare metal (.8, .110) | — | LOW — no Docker on GPU hosts | log rotate |
 
-> **Decommissioned:** CT 118 (jitsi) — intentionally stopped, not scanned.
-> **Migrated:** CT 101 (llm-gpu) → bare metal .8, CT 103 (ocu-llm) → bare metal .110.
+> **Note:** CT 118 is now jdownloader (active on storepve). CT 101 (llm-gpu) → bare metal .8, CT 103 (ocu-llm) → bare metal .110.
 
 ## Threat Levels
 
@@ -275,10 +274,10 @@ one-off GPU builds. No automated post-migration cleanup was in place.
 ### CT Access (via pct-run)
 | CT | Name | Node | Status |
 |----|------|------|--------|
-| 100 | abiba | amdpve | local |
-| 102 | adguard | acerpve | ✅ reachable |
+| 100 | abiba | minipve | local |
+| 102 | adguard | minipve | ✅ reachable |
 | 104 | authentik | minipve | ✅ reachable |
-| 105 | kagentz | amdpve | ✅ reachable |
+| 105 | kagentz | minipve | ✅ reachable |
 | 106 | ra-h-os | storepve | ✅ reachable |
 | 107 | pbs | storepve | ✅ reachable |
 | 108 | media | storepve | ✅ reachable |
@@ -286,7 +285,6 @@ one-off GPU builds. No automated post-migration cleanup was in place.
 | 111 | tdunna | amdpve | ✅ reachable |
 | 112 | tanko | amdpve | ✅ reachable |
 | 113 | baggy | amdpve | ✅ reachable |
-| 114 | mumuni | hwepve | ✅ reachable |
 | 115 | scottdenya | amdpve | ✅ reachable |
 | 116 | syslog-api | minipve | ✅ reachable |
 | 117 | zulip | storepve | ✅ reachable |
@@ -303,4 +301,4 @@ one-off GPU builds. No automated post-migration cleanup was in place.
 |------|-----|------|--------|
 | docker-vm | 192.168.68.7 | 16 Docker containers, 4 stacks | ✅ reachable |
 
-> **Decommissioned:** CT 118 (jitsi) — intentionally stopped.\n> **Migrated:** CT 101 → .8, CT 103 → .110 (bare metal GPU).\n> **KVM VM:** CT 109 (docker-vm) is a KVM VM, not LXC — access via SSH .7.
+> **Note:** CT 118 is now jdownloader (active on storepve). CT 119 (infisical-vault) added on minipve.\n> **Migrated:** CT 101 → .8, CT 103 → .110 (bare metal GPU).\n> **KVM VM:** CT 109 (docker-vm) is a KVM VM, not LXC — access via SSH .7.

docs/AUTHORING-GUIDE.md

@@ -13,7 +13,7 @@ the description:
 
 1. **What system does this contract touch?** Name the hosts, CTs, containers,
    and services explicitly. "The inference fleet" is vague. "GPU .8 (RTX 3090,
-   qwen), .110 (RTX 5070, gemma), .15 (Strix Halo, ornith), and LiteLLM on CT
+   qwen), .110 (RTX 5070, gemma), .15 (Strix Halo, strix-moe), and LiteLLM on CT
    116" is specific.
 
 2. **Who runs this contract, and when?** State the agent, the trigger (cron,
@@ -185,7 +185,7 @@ what, and why should I care?
 
 ```
 ❌ "Monitors infrastructure health"
-✅ "Scans all 6 Proxmox nodes and 19 CTs for disk pressure, checks Docker
+✅ "Scans all 5 Proxmox nodes and 19 CTs for disk pressure, checks Docker
    container health on .7/.116/.17, alerts via Telegram DM on RED/CRITICAL"
 ```
 

gpu-fleet.prose.md

@@ -10,11 +10,13 @@ description: >
   Strix Halo: strix-moe → unsloth/Qwen3.6-35B-A3B-MTP (UD-Q4_K_M, 22GB).
   RTX 5070: gemma-4-12b Q4_K_M → IQ4_NL + MTP draft (122 tok/s, 2x faster).
   UPDATED 2026-07-17: Context reduced fleet-wide from 256K to 128K for stability.
-  Strix Halo model swapped to Genesis Hermes V3 APEX (LuffyTheFox, 24GB, uncensored,
-  Hermes agent fine-tune, tensor repair, multimodal with mmproj).
-  Instability observed near 100K at 256K. 128K is the stable ceiling.
+  Strix Halo model swapped to qwen3.6-35B-udq4 (22GB, strix-moe alias).
+  Instability observed near 100K at 256K (now all GPUs at 128K). 128K is the stable ceiling.
   For larger context needs → fall back to external providers (deepseek).
   VRAM headroom improved: RTX 3090 ~70%, RTX 5070 ~65%.
+  UPDATED 2026-08-15: gpu-dense swapped to Qwen3.8-27B-Uncensored-Q4_K_M
+  (~16.8GB, 128K ctx, --spec-type draft-mtp (v2)). Served on .8:8080 under the legacy
+  alias qwen3.6-27B-code for LiteLLM routing continuity. Replaces SmartCode-Fable-5-27B.
 agent: abiba
 triggers:
   - on model add/remove
@@ -87,7 +89,7 @@ When a model is swapped on a GPU, ONLY the infrastructure layer changes — agen
 | Alias | GPU | Current Model | Will Route To |
 |-------|-----|---------------|---------------|
 | `strix-moe` | Strix Halo (.15) | qwen3.6-35B-udq4 | Whatever runs on Strix Halo |
-| `gpu-dense` | RTX 3090 (.8) | qwen3.6-27B-code | Whatever runs on RTX 3090 |
+| `gpu-dense` | RTX 3090 (.8) | Qwen3.8-27B-Uncensored-Q4_K_M | Whatever runs on RTX 3090 |
 | `gpu-light` | RTX 5070 (.110) | gemma-4-12b | Whatever runs on RTX 5070 |
 
 **Backward compatibility**: Old model-specific names (qwen3.6-27B-code, gemma-4-12b, qwen3.6-35B-udq4) still work
@@ -97,9 +99,9 @@ but are deprecated for agent configs. Only the stable aliases survive model swap
 
 | Model | GPU | Host | VRAM | Ctx | KV Cache | Parallel | Batch/Ubatch | Status |
 |-------|-----|------|------|-----|----------|----------|-------------|--------|
-| qwen3.6-27B-code (MTP) | RTX 3090 | .8 (llm-gpu) | ~17/24.6GB (70%) | **128K** | turbo4 | 2 | default | ✅ 63 tok/s |
+| Qwen3.8-27B-Uncensored-Q4_K_M | RTX 3090 | .8 (llm-gpu) | ~16.8/24.6GB | **128K** | turbo4 | 1 | 2048/1024 | ✅ healthy |
 | gemma-4-12b | RTX 5070 | .110 (ocu-llm) | ~7.8/12.2GB (65%) | 128K | q4_0 | 2 | 2048/1024 | ✅ healthy |
-| Genesis Hermes V3 APEX | Strix Halo Vulkan | .15 (amdpve) | ~10GB/64GB | 128K | q4_0 | 1 | 4096/1024 | ✅ 65 tok/s |
+| qwen3.6-35B-udq4 | Strix Halo Vulkan | .15 (amdpve) | ~22GB/64GB | 128K | q4_0 | 1 | 4096/1024 | ✅ 65 tok/s |
 
 ## Routing Configuration (LiteLLM — July 2026)
 
@@ -107,8 +109,8 @@ but are deprecated for agent configs. Only the stable aliases survive model swap
 
 | Model | GPU | Weight | RPM Cap | Timeout |
 |-------|-----|--------|---------|---------|
-| qwen3.6-27B-code | RTX 3090 (.8:8080) | **0.55** | 500 | **300s** |
-| Genesis Hermes V3 APEX | Strix Halo (.15:8080) | **0.30** | 60 | **300s** |
+| Qwen3.8-27B-Uncensored-Q4_K_M | RTX 3090 (.8:8080) | **0.55** | 500 | **300s** |
+| qwen3.6-35B-udq4 | Strix Halo (.15:8080) | **0.30** | 60 | **300s** |
 | gemma-4-12b | RTX 5070 (.110:8080) | **0.15** | 200 | **120s** |
 
 Note: All syslog-auto entries route directly to GPUs with `api_key: not-needed`. The router (port 9000) is NOT in the inference path.
@@ -117,8 +119,8 @@ Note: All syslog-auto entries route directly to GPUs with `api_key: not-needed`.
 
 | Model | RPM Cap | Notes |
 |-------|---------|-------|
-| strix-moe (Hermes V3) | 40 | Tight cap — prevents Strix overload |
-| qwen3.6-27B-code | 500 | High cap — primary workhorse |
+| strix-moe (qwen3.6-35B-udq4) | 40 | Tight cap — prevents Strix overload |
+| Qwen3.8-27B-Uncensored-Q4_K_M | 500 | High cap — primary workhorse (replaces qwen3.6-27B-code) |
 | gemma-4-12b | 500 | High cap — IQ4_NL+MTP, 122 tok/s |
 
 ### Stable Aliases (for agent configs — never change)
@@ -205,7 +207,7 @@ Plaintext keys removed from this contract post-vault-migration.
 | Agent | CT | IP | LiteLLM Alias | Key Source | Access |
 |-------|-----|-----|---------------|------------|--------|
 | Tanko | 112 | .122 | `tanko` | Infisical vault | SSH jerome |
-| Mumuni | 114 | .123 | `mumuni` | Infisical vault | SSH root |
+| Mumuni | 100 (abiba) | .24 | `mumuni` | Infisical vault | SSH root |
 | Abiba | 100 | .24 | `abiba-pi` | Infisical vault | local (pi agent) |
 | Koby | 111 | ? | `koby` | Infisical vault | Zulip DM |
 | Koonimo | 113 | ? | `koonimo` | Infisical vault (migrated 2026-07-11) | no SSH |
@@ -248,13 +250,16 @@ If no SSH access, send Zulip DM via abiba-bot with vault update instructions.
   Fix: trigger roster reload via SSH after restart, or rebuild image with startup load_roster().
 - **LiteLLM /metrics**: Requires auth. Prometheus uses `/health/liveliness` as workaround.
 - **VRAM (2026-07-15)**: RTX 3090 at ~17/24.6GB (~70%) with **128K context** (reduced from 256K 2026-07-17). RTX 5070 at ~7.8/12.2GB (~65%) with 128K context + MTP. Strix Halo at ~7GB/64GB.
-- **RTX 3090 runs `--parallel 2`** with MTP draft (spec-type draft-mtp, spec-draft-n-max 2).
-- **RTX 3090 config**: `-c 131072 -ctk turbo4 -ctv turbo4 --parallel 2 --flash-attn on --cont-batching --spec-type draft-mtp`. Context reduced to 128K (2026-07-17, was 256K). VRAM: ~70%. Service: `/home/llmuser/llama-wrapper.sh`.
+- **RTX 3090 (2026-08-15)**: Swapped to Qwen3.8-27B-Uncensored-Q4_K_M (~16.8GB, replaced
+  SmartCode-Fable-5-27B-UD-Q3_K_XL). Service: `/home/llmuser/llama-fable-wrapper.sh`.
+  Served under alias `qwen3.6-27B-code` for LiteLLM routing continuity.
 - **RTX 5070 config (2026-07-15)**: Switched to IQ4_NL + MTP draft (Q8_0) at 128K context. Gen speed: 122 tok/s. VRAM: ~7.8/12.2GB (~65%). Service: `/home/llmuser/llama-wrapper.sh`. Config: `--model gemma-4-12b-it-IQ4_NL.gguf --spec-draft-model gemma-4-12b-it-Q8_0-MTP.gguf --spec-type draft-mtp --spec-draft-n-max 4 --ctx-size 131072`.
-- **LiteLLM timeout tuning (verified 2026-07-16 against `/opt/inference-harness/litellm_config.yaml` on CT 116)**: gemma-4-12b 120s, qwen3.6-27B-code 300s, qwen3.6-35B-udq4 300s, strix-moe 300s, syslog-auto routes all 300s. Nginx proxy_read_timeout: 600s. Global request_timeout: 300s.
-- **Strix Halo GPU**: Vulkan is the working backend (ROCm/HIP path abandoned — HSA runtime blocked on Debian 13). Build at `/root/llama.cpp/build-vk/`, commit `4fc4ec5` (2026-07-01), ggml 0.15.3 shared-lib arch. Mesa RADV 25.0.7, KHR_coopmat fast path active. ~70 tok/s gen, 532 tok/s prompt. Service: `strix-server.service` on port 8080, model: `LuffyTheFox/Qwen3.6-35B-A3B-Uncensored-Genesis-Hermes-V3-GGUF` (APEX quant), alias `strix-moe`, 128K context, flash-attn + q4 KV, multimodal (mmproj loaded). Hermes agent fine-tune, tensor repair (SSM layers fixed via SVD), uncensored (0/465 refusals).
+- **LiteLLM timeout tuning (verified 2026-08-16)**: Qwen3.8-27B (alias qwen3.6-27B-code)
+  300s, gemma-4-12b 120s, qwen3.6-35B-udq4 300s, strix-moe 300s, syslog-auto routes all
+  300s. Nginx proxy_read_timeout: 600s. Global request_timeout: 300s.
+- **Strix Halo GPU**: Vulkan is the working backend (ROCm/HIP path abandoned — HSA runtime blocked on Debian 13). Build at `/root/llama.cpp/build-vk/`, commit `4fc4ec5` (2026-07-01), ggml 0.15.3 shared-lib arch. Mesa RADV 25.0.7, KHR_coopmat fast path active. ~70 tok/s gen, 532 tok/s prompt. Service: `strix-server.service` on port 8080, model: `qwen3.6-35B-udq4`, alias `strix-moe`, 128K context, flash-attn + q4 KV, multimodal (mmproj loaded).
 - **Port conflict detection (2026-07-05)**: All 3 GPU wrappers now detect ghost processes squatting port 8080 before starting. `.8` and `.110` use inline pre-start check in `llama-wrapper.sh`; `.15` uses `/usr/local/bin/port-cleanup.sh` ExecStartPre. Replaces the blanket `pkill -9 -x llama-server` on .15 which would kill ALL llama-server instances regardless of port. Ghost detection was the root cause of .8 crash-looping for 27+ restarts (stale pid 25836 squatting 8080 after OOM kill).
-- **Strix Halo thermal safeguard (2026-07-02)**: `strix-server.service` has `-n 8192` (hard generation cap per request). Without it, `--predict` defaults to -1 (infinity) — a runaway request from .123 (Mumuni) decoded 39,868 tokens over 24 min, pushing Tctl to 98°C (crit 89.8°C) and throttling 70→29 t/s. The cap bounds worst-case generation to ~5 min. Do NOT remove `-n` without a replacement ceiling. Sustained load hits ~84°C even at 92s; the APU is fanless/low-flow. Clients MUST also set `max_tokens`.
+- **Strix Halo thermal safeguard (2026-07-02)**: `strix-server.service` has `-n 8192` (hard generation cap per request). Without it, `--predict` defaults to -1 (infinity) — a runaway request from .123 (old Mumuni CT114 — now inside Abiba CT100 at .24) decoded 39,868 tokens over 24 min, pushing Tctl to 98°C (crit 89.8°C) and throttling 70→29 t/s. The cap bounds worst-case generation to ~5 min. Do NOT remove `-n` without a replacement ceiling. Sustained load hits ~84°C even at 92s; the APU is fanless/low-flow. Clients MUST also set `max_tokens`.
 - **Port 8080 firewall**: amdpve iptables restricts 8080 to 192.168.68.116 (LiteLLM/router host) only. All inbound connections are from .116 (LiteLLM proxied via nginx). Localhost curls hang (SYN dropped). Always test from .116.
 - **Router sidecar fallback**: `router.py` `check_gpu_health()` now probes GPU `/health` directly when sidecar at :8090 is absent. Sidecar JSON exporters not deployed on any GPU host — router relies on GPU-direct fallback.
 - **Router GPU_MOE_URL bug (fixed 2026-07-01)**: docker-compose had `GPU_MOE_URL=.110:8080` (gemma host) instead of `.15:8080` (amdpve). Corrected.
@@ -266,11 +271,11 @@ If no SSH access, send Zulip DM via abiba-bot with vault update instructions.
 
 | GPU | Model | Gen tok/s | Prompt tok/s | Baseline | Context |
 |-----|-------|-----------|--------------|----------|---------|
-| RTX 3090 (.8) | qwen3.6-27B-code (MTP) | **63** | — | — | **128K** |
+| RTX 3090 (.8) | Qwen3.8-27B-Uncensored-Q4_K_M | **TBD** | — | — | **128K** |
 | RTX 5070 (.110) | gemma-4-12b (IQ4_NL+MTP) | **191** | — | — | **128K** |
-| Strix Halo (.15) | Genesis Hermes V3 APEX | **65** | 140 | — | **128K** |
+| Strix Halo (.15) | qwen3.6-35B-udq4 | **65** | 140 | — | **128K** |
 
-Benchmarks from 2026-07-17. Strix Halo swapped to Genesis Hermes V3 APEX (LuffyTheFox). RTX 5070 MTP provides 2.7x speedup over pre-upgrade 70 tok/s.
+Benchmarks from 2026-07-17. Strix Halo model: qwen3.6-35B-udq4. RTX 5070 MTP provides 2.7x speedup over pre-upgrade 70 tok/s.
 All 3 GPUs now at 128K context (2026-07-17, reduced from 256K for stability).
 
 Benchmarks run through LiteLLM proxy (192.168.68.116:4001) every 5 minutes.
@@ -299,7 +304,7 @@ When the underlying model is swapped, only the LiteLLM config changes — agent
 
 ### Mumuni Agent Profile
 
-Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile is the reference for all agent configs:
+Mumuni (CT100/abiba, 192.168.68.24) is the primary business assistant. This profile is the reference for all agent configs:
 
 | Setting | Value | Notes |
 |---------|-------|-------|
@@ -316,7 +321,7 @@ Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile i
 | `compression.protect_last_n` | 40 | Preserves last 40 messages |
 | `memory.memory_char_limit` | 800 | Brief memory entries |
 | `personalities` | `creative` | Creative assistant personality |
-| Platforms | cli, discord, homeassistant, signal, telegram, zulip | All Hermes platforms |
+| Platforms | cli, homeassistant, signal, telegram, zulip | All Hermes platforms |
 | Main model timeout | 300s | LiteLLM global timeout |
 | Compression model timeout | 300s | strix-moe timeout increased from 120s |
 
@@ -324,7 +329,7 @@ Mumuni (CT114, 192.168.68.123) is the primary business assistant. This profile i
 
 | Agent | Host | Status |
 |-------|------|--------|
-| **Mumuni** | CT114 (.123) | ✅ Updated to stable aliases |
+| **Mumuni** | CT100 (.24) | ✅ Updated to stable aliases |
 | **Tanko** | CT112 (.122) | ✅ Updated to stable aliases |
 | **Koby** | CT111 (.129) | ❌ SSH unreachable — needs Zulip DM |
 | **Koonimo** | CT113 | ❌ SSH unreachable — needs Zulip DM |

gpu-monitor.prose.md

@@ -47,7 +47,7 @@ poll .15:8080 directly; must go through router on .116.
 | Router (unified) | `http://192.168.68.116/health/unified` | 15s | models, CB, scores, GPU status |
 | Router (basic) | `http://192.168.68.116/health` | 15s | basic aliveness |
 | LiteLLM | `http://192.168.68.116/litellm/health` | 15s | proxy health, model count |
-| Strix Halo | `http://192.168.68.116/health/unified` (router) | 15s | ornith status via router — cannot poll .15:8080 directly (firewalled to .116 only) |
+| Strix Halo | `http://192.168.68.116/health/unified` (router) | 15s | Strix Halo status via router — cannot poll .15:8080 directly (firewalled to .116 only) |
 | Dashboard | `http://192.168.68.116/dashboard/` | 15s | harness-dashboard aliveness |
 
 ### Alert Delivery

gpu-self-heal.prose.md

@@ -44,9 +44,9 @@ depends_on:
 
 | Alias | GPU | Host | Model | VRAM | Ctx | tok/s | Role |
 |-------|-----|------|-------|------|-----|-------|------|
-| `gpu-dense` | RTX 3090 24GB | ct8 (.8:8080) | ThinkingCap Qwen3.6-27B Q4_K_M + MTP + vision | 21.6/24.6GB (88%) | 128K | 74.9 | Heavy reasoning, code gen |
+| `gpu-dense` | RTX 3090 24GB | ct8 (.8:8080) | Qwen3.8-27B-Uncensored-Q4_K_M (alias qwen3.6-27B-code) | ~16.8/24.6GB | 128K | — | Heavy reasoning, code gen |
 | `gpu-light` | RTX 5070 12GB | ct110 (.110:8080) | HauhauCS Gemma4-12B QAT Q4_K_M + MTP draft | 10.1/12.2GB (83%) | 128K | 169.6 | Vision, web extract, light tasks |
-| `strix-moe` | Strix Halo 64GB | ct15 (.15:8080) | Genesis Hermes V3 APEX (LuffyTheFox, 24GB) | ~10/64GB (16%) | 128K | 62.9 | Compression, summarization, long docs |
+| `strix-moe` | Strix Halo 64GB | ct15 (.15:8080) | qwen3.6-35B-udq4 | ~10/64GB (16%) | 128K | 62.9 | Compression, summarization, long docs |
 
 Key notes:
 - All models use direct GPU routing via LiteLLM (`api_key: not-needed`). Router (port 9000) is deprecated and NOT in the inference path.
@@ -143,7 +143,7 @@ Key notes:
 - **Detect**: Benchmark tok/s vs baseline for each GPU at current context (all 128K)
   - RTX 3090 (128K ctx, ThinkingCap): baseline 74.8 tok/s — currently at 74.9 (100%)
   - RTX 5070 (128K ctx, HauhauCS QAT): baseline 165.2 tok/s — currently at 169.6 (103%)
-  - Strix Halo (128K ctx, Genesis Hermes V3): baseline 70.5 tok/s — currently at 62.9 (89%)
+  - Strix Halo (128K ctx, qwen3.6-35B-udq4): baseline 70.5 tok/s — currently at 62.9 (89%)
 - **Fix**:
   - If tok/s > baseline → context has headroom, consider increasing
   - If tok/s < 90% baseline → reduce context by 25% and retest
@@ -251,8 +251,8 @@ call update-gpu-health
 
 ## Reporting
 
-### 1. Knowledge Graph
-Every action logged as `[GPU-SELF-HEAL] <run_id>` node with full audit trail.
+### 1. Gitea Log (not knowledge graph — hard rule)
+Pushed to `SyslogSolution/health-logs/gpu/{run_id}.json` — versioned, searchable, not in graph.
 
 ### 2. Zulip Alerts (#agent-hub → alerts-gpu)
 - `issues_fixed > 0` → "🛠 GPU Self-Heal — <gpu> <issue> resolved"

hermes-agent-baseline.prose.md

@@ -5,7 +5,7 @@ version: 1.0.0
 description: >
   Canonical known-good baseline for all Syslog Hermes agents. Captures the exact
   configuration state, keys, workarounds, and audit procedure. When an agent's
-  configuration goes sideways, restore from this baseline. Last verified 2026-07-16. All GPUs 256K context (RTX 3090 .8, RTX 5070 .110, Strix Halo .15). Parallel 1 fleet-wide (Strix Halo handles compression solo).
+  configuration goes sideways, restore from this baseline. Last verified 2026-07-16. All GPUs 128K context (reduced from 256K for stability Jul 2026) (RTX 3090 .8, RTX 5070 .110, Strix Halo .15). Parallel 1 fleet-wide (Strix Halo handles compression solo).
 author: Abiba (pi agent)
 ---
 
@@ -24,13 +24,13 @@ done
 
 | Agent | CT | Node | IP | LiteLLM Alias | Key Source | Platform |
 |-------|-----|------|-----|---------------|------------|----------|
-| Tanko | 112 | amdpve | .122 | `tanko` | Infisical vault | Hermes |
-| Mumuni | 114 | hwepve | .123 | `mumuni` | Infisical vault | Hermes |
-| Koby | 129 | amdpve | srv1079750 | `koby` | Infisical vault | **Hermes** |
-| Koonimo | 114 | amdpve | ? | `koonimo` | Infisical vault | Hermes |
+| Tanko | 112 | amdpve | .122 | `tanko` | Infisical vault | **DSH** (DeepSeek Harness) |
+| Mumuni | 100 | minipve | .24 | `mumuni` | Infisical vault | Hermes |
+| Koby | 111 | amdpve | .129 | `koby` | Infisical vault | **Hermes** |
+| Koonimo | 113 | amdpve | .114 | `koonimo` | Infisical vault | Hermes |
 | Shumba | — | 192.168.68.119 | N/A | N/A (DeepSeek) | Hermes (RETIRED — CT119 now Infisical vault) |
 
-> **Note**: CT hostnames (tdunna→CT129, baggy→CT114) differ from agent identities (koby, koonimo).
+> **Note**: CT hostnames (tdunna→CT111, baggy→CT113) differ from agent identities (koby, koonimo).
 
 Access: `pct-run <CT_ID> <command>` — no IPs needed. GPU hosts (.8, .110, .15) use SSH.
 Keys are stored in Infisical vault (project=agents, env=production) and injected at
@@ -53,9 +53,10 @@ Agent (systemd) → LITELLM_API_KEY → LiteLLM (:116/v1) → Router (:9000) →
 
 ## Config Pattern — Mandatory Fields
 
-### For Hermes Agents (Tanko, Mumuni, Koonimo)
+### For Hermes Agents (Mumuni, Koonimo)
 
-Every agent's `/root/.hermes/config.yaml` (or `/home/jerome/.hermes/config.yaml`) MUST have:
+Every Hermes agent's `/root/.hermes/config.yaml` (or `/home/jerome/.hermes/config.yaml`) MUST have:
+(Tanko is excluded — migrated to DSH/DeepSeek Harness on 2026-08-27, no longer uses Hermes config.)
 
 ### 1. Main Model
 ```yaml
@@ -169,9 +170,9 @@ pct-run <CT> grep -A8 "vision:" /root/.hermes/config.yaml | grep api_key
 # Must show both api_key: sk-... and api_key_env: LITELLM_API_KEY
 ```
 
-### For Koby (CT 129 / tdunna)
+### For Koby (CT 111 / tdunna)
 
-Koby runs Hermes on CT 129 (tdunna). Config files at `/root/.hermes/config.yaml`.
+Koby runs Hermes on CT 111 (tdunna). Config files at `/root/.hermes/config.yaml`.
 Same Hermes pattern as Tanko/Mumuni/Koonimo — see config sections above.
 
 **LiteLLM key**: alias `koby` in LiteLLM DB, injected via `infisical run --` wrapper.

hermes-config-template.prose.md

@@ -5,21 +5,17 @@ description: >
   Standard Hermes configuration template for Syslog Solution LLC agents.
   Enforces shared infrastructure setup (Firecrawl, SearXNG, local models,
   RA-H OS MCP) while keeping agent-specific API keys and model choices.
-  UPDATED 2026-07-18: Compression model switched to `syslog-auto` (was `strix-moe`)
-  to relieve Strix Halo pressure. syslog-auto distributes compression across the
-  weighted pool (55% RTX 3090, 30% Strix Halo, 15% RTX 5070).
-  UPDATED 2026-07-16: Compression model was the stable alias `strix-moe` (NOT `ornith-1.0-35b`,
-  which LiteLLM does not serve). All 3 GPUs verified at 128K (reduced from 256K 2026-07-17 for stability).
+  UPDATED 2026-08-07: Added Rule 15 (MCP Validation) from the 2026-08-07 keyless-MCP incident.
   Added Rule 12 (Context-Issue Diagnostic) + Rule 13 (.env fallback enforcement) from the
   2026-07-16 Mumuni root-cause investigation (WAL #1300).
-  UPDATED 2026-07-12: GPU workload redistributed. Compression → Strix Halo (later switched to syslog-auto 2026-07-18). RTX 3090 context verified at 128K. Infisical .env fallback required (Rule 3/13).
+  UPDATED 2026-07-12: GPU workload redistributed. Compression → Strix Halo. RTX 3090 context verified at 128K. Infisical .env fallback required (Rule 3/13).
 ---
 
 ## Maintains
 
 - template_version: "2.1.0"
 - last_applied: timestamp
-- agents_configured: ["tanko", "mumuni", "abiba", "koby", "koonimo", "kagenz0"]
+- agents_configured: ["mumuni", "abiba", "koby", "koonimo", "kagenz0"]  # tanko removed 2026-08-27 (now on DSH/DeepSeek Harness)
 - agent_keys: map (see Agent Keys section)
 - infra_endpoints_verified: array
 
@@ -34,11 +30,11 @@ Sub-agent profiles inherit auth from the main config — no separate keys needed
 
 | Agent | Key Alias | Host | SSH | Sub-Agents |
 |-------|-----------|------|-----|-----------|
-| Tanko | `tanko-*` | 192.168.68.122 | jerome@.122 | — |
-| Mumuni | `mumuni` | 192.168.68.123 | root@.123 | 6 profiles ✱ |
+| Tanko | `tanko` | CT 112 (.122) | jerome@.122 | — |
+| Mumuni | `mumuni` | 192.168.68.24 | root@.24 | 6 profiles ✱ |
 | Abiba | `abiba-pi` | 192.168.68.24 | local | — |
 | Koby | `koby` | CT 111 (tdunna) | Zulip | — |
-| Koonimo | `koonimo` | CT 114 (baggy) | SSH root | — |
+| Koonimo | `koonimo` | CT 113 (baggy) | SSH root | — |
 | Kagenz0 | `kagenz0-*` | ? | Zulip | — |
 
 > CT hostnames (tdunna, baggy) differ from agent identities (koby, koonimo).
@@ -51,7 +47,7 @@ Sub-agent profiles inherit auth from the main config — no separate keys needed
 | Component | Endpoint | Purpose |
 |---|---|---|
 | Firecrawl | `http://192.168.68.7:3002/` | Web content extraction |
-| SearXNG | `http://storepve:8888` | Privacy-respecting web search |
+| SearXNG | `http://192.168.68.7:8888` | Privacy-respecting web search |
 | LiteLLM | `http://192.168.68.116/v1` | Unified model gateway (via nginx) |
 | LiteLLM (NetBird) | `https://litellm.sysloggh.net/v1` | Alternative (may have 502 issues) |
 | RA-H OS MCP | `http://192.168.68.65:3100/mcp` | Knowledge graph bridge |
@@ -100,10 +96,14 @@ work immediately after restart.
 model:
   default: <agent_model>          # e.g., strix-moe, qwen3.6-27B-code, syslog-auto
   provider: harness
-  base_url: http://192.168.68.116/v1
+  base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated path; /v1 also OK
   api_key_env: LITELLM_API_KEY    # Injected via infisical run -- wrapper
   max_tokens: 4096                # ⚠️ CRITICAL: Prevents unbounded generation
   context_length: 131072          # For syslog-auto (all GPUs at 128K for stability).
+                                  # ⚠️ MANDATORY: Hermes probes unknown models from 256K
+                                  # and falls back to 256K when /v1/models lacks a context
+                                  # field (llama-server does). Without this override, agents
+                                  # silently run syslog-auto at 256K (verified 2026-08-09).
                                   # Set 65536 if using gemma-4-12b directly (tight VRAM).
 
 fallback_providers:
@@ -133,9 +133,7 @@ mcp_servers:
 # ─── Compression ───
 compression:
   enabled: true
-  model: syslog-auto              # ⚠️ Switched from strix-moe 2026-07-18 to relieve Strix Halo.
-                                  # syslog-auto distributes across weighted pool (55% RTX 3090,
-                                  # 30% Strix Halo, 15% RTX 5070). All GPUs at 128K.
+  model: syslog-auto               # ⚠️ Must match auxiliary.compression.model. Stable alias (gpu-fleet § Stable Role-Based Aliases). NOT ornith-1.0-35b (LiteLLM does not serve that name).
   provider: harness
   max_context_window: 131072      # MUST match actual GPU capacity. All 3 GPUs are 128K (Jul 17).
   threshold: 0.65                 # Fires at ~170K for 262K window, ~85K for 128K
@@ -148,11 +146,10 @@ compression:
 # ─── Auxiliary Tasks (CONSISTENCY RULE) ───
 # All auxiliary services MUST use identical model, base_url, and api_key_env:
 #   model: gpu-light                 # stable alias (NOT raw "gemma-4-12b")
-#   base_url: http://192.168.68.116/v1
+#   base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated; /v1 also OK
 #   api_key_env: LITELLM_API_KEY
-# Compression uses syslog-auto (switched from strix-moe 2026-07-18) to distribute
-# load across the weighted pool and relieve Strix Halo pressure.
-# Vision and web_extract use gpu-light = RTX 5070 (12B).
+# Do NOT use syslog-auto for auxiliary tasks — it routes to the primary GPU.
+# gpu-light = RTX 5070 (12B), freeing the Strix Halo for agent reasoning.
 # Heavy aux (delegation, x_search) use gpu-dense (RTX 3090) instead.
 # NEVER use raw model names (gemma-4-12b, qwen3.6-27B-code, qwen3.6-35B-udq4)
 # in agent configs — use the stable aliases so model swaps don't break agents.
@@ -160,20 +157,20 @@ auxiliary:
   vision:
     provider: harness
     model: gpu-light            # stable alias for RTX 5070 (was raw gemma-4-12b)
-    base_url: http://192.168.68.116/v1
+    base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated; /v1 also OK
     api_key_env: LITELLM_API_KEY
     timeout: 60
     download_timeout: 30
   web_extract:
     provider: harness
     model: gpu-light            # stable alias for RTX 5070
-    base_url: http://192.168.68.116/v1
+    base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated; /v1 also OK
     api_key_env: LITELLM_API_KEY
     timeout: 30
   compression:
     provider: harness
-    model: syslog-auto             # Switched from strix-moe 2026-07-18. Relieves Strix Halo pressure.
-    base_url: http://192.168.68.116/v1   # Rule 5: /v1 NOT /litellm/v1
+    model: syslog-auto              # MUST match compression.model above. Stable alias for Strix Halo (weighted pool).
+    base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated path; /v1 also OK
     api_key_env: LITELLM_API_KEY
     timeout: 300                 # gpu-fleet: 300s for large-history summarization (was 60)
 
@@ -183,14 +180,14 @@ auxiliary:
 delegation:
   model: gpu-dense              # stable alias for RTX 3090 (was raw qwen3.6-27B-code)
   provider: harness
-  base_url: http://192.168.68.116/v1
+  base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated; /v1 also OK
   api_key_env: LITELLM_API_KEY
 
 # ─── Custom Provider ───
 custom_providers:
   - name: harness
     model: syslog-auto            # weighted pool (default)
-    base_url: http://192.168.68.116/v1
+    base_url: http://192.168.68.116/litellm/v1   # Rule 5 (2026-08-09): canonical authenticated; /v1 also OK
     api_key_env: LITELLM_API_KEY
     api_mode: chat_completions
 ```
@@ -240,10 +237,13 @@ The following MUST be identical across ALL profiles:
 - When main config uses `api_key_env`, sub-agents automatically use it
 - This means key rotation only touches ONE vault secret (`LITELLM_API_KEY`)
 
-### Rule 5: Main Config Base URL
-|- Use direct IP: `http://192.168.68.116/v1`
+### Rule 5: Main Config Base URL (UPDATED 2026-08-09)
+|- Use the authenticated LiteLLM path: `http://192.168.68.116/litellm/v1` (canonical, captain-approved migration)
+|- Legacy `http://192.68.68.116/v1` also works — nginx fronts BOTH paths with key auth
+  (verified 2026-08-09: 401 without key, 200 with key, on both /v1 and /litellm/v1)
+|- Both locations have `proxy_read_timeout 600s` (verified in harness-nginx nginx.conf) —
+  the old "60s timeout on /litellm/" claim was stale and is retracted
 |- NOT the NetBird URL (`litellm.sysloggh.net`) — can cause 502 when NetBird is down
-|- NOT the old path (`/litellm/v1`) — nginx now routes `/v1` directly
 
 ### Rule 6: max_tokens Is Required (Thermal Safety)
 - **Every Hermes config MUST set `model.max_tokens: 4096`** — this is non-negotiable
@@ -253,30 +253,34 @@ The following MUST be identical across ALL profiles:
 - Apply to BOTH main config AND all sub-agent profiles
 - For agents needing longer outputs: raise to 8192, but never omit
 
-### Rule 7: Auxiliary Model Consistency (UPDATED 2026-07-18)
-- Vision and web_extract use `gpu-light` (stable alias, RTX 5070 — 12GB, vision-optimized)
-- Compression now uses `syslog-auto` (switched from `strix-moe` 2026-07-18) to distribute
-  compression load across the weighted pool (55% RTX 3090, 30% Strix Halo, 15% RTX 5070).
-  This relieves Strix Halo pressure while keeping compression functional on all GPUs.
-- **`syslog-auto` is the valid compression model** — LiteLLM serves it as the weighted pool.
-  Old configs with `strix-moe` for compression should be updated to `syslog-auto`.
+### Rule 7: Auxiliary Model Consistency (UPDATED 2026-07-16)
+- Vision and web_extract use `gemma-4-12b` (RTX 5070 — 12GB, vision-optimized)
+- Compression uses `strix-moe` (stable alias for Strix Halo — 64GB, 128K ctx, compression-optimized)
+- **`strix-moe` is the only valid compression model name** — LiteLLM does NOT serve `ornith-1.0-35b`
+  (it serves `strix-moe`, `qwen3.6-35B-udq4`, `gpu-dense`, `gpu-light`, `syslog-auto`, `gemma-4-12b`, `qwen3.6-27B-code`). Old configs with `ornith-1.0-35b` cause 403/model-not-found on compression calls.
+- **OPERATIONAL DECISION (2026-07-23): Use `syslog-auto` for compression across all agents.**
+  The `syslog-auto` alias routes to the Strix Halo, but uses the weighted pool instead of pinning
+  to `strix-moe` directly. This prevents sustained Strix Halo thermal load because the pool can
+  fall back to other GPUs if Strix gets hot. Both `compression.model` and `auxiliary.compression.model`
+  MUST be `syslog-auto`.
 - All auxiliary services MUST use identical routing:
-  - `base_url: http://192.168.68.116/v1`  (Rule 5: `/v1`, NOT `/litellm/v1`)
+  - `base_url: http://192.168.68.116/litellm/v1`  (Rule 5, 2026-08-09: canonical authenticated; `/v1` also OK)
   - `api_key_env: LITELLM_API_KEY`
-- **Compression via syslog-auto**: Routes through the weighted pool. Strix Halo still handles
-  ~30% of compression calls (at 60 RPM via pool vs 40 RPM direct), but the bulk (55%)
-  goes to RTX 3090 which has ample spare capacity.
+- **Do NOT use `syslog-auto`** for auxiliary tasks — it routes unpredictably
+- **Compression on Strix Halo**: The strix-moe alias routes to Strix Halo
+  (64GB UMA, 128K context) — the designated compression GPU. This frees the
+  RTX 5070 for vision and web search, and the RTX 3090 for heavy reasoning.
 - The `compression:` block's `model` MUST match `auxiliary: compression: model`
 - The `compression: max_context_window: 131072` MUST match actual GPU capacity (128K)
 
-### Rule 8: GPU Workload Distribution (UPDATED 2026-07-18)
-- **RTX 3090 (24GB, 128K ctx, qwen3.6-27B-code)**: Heavy reasoning, code gen, long conversations — also handles ~55% of compression via syslog-auto pool
-- **RTX 5070 (12GB, 128K ctx, gemma-4-12b)**: Vision, web search, quick tasks, web_extract — handles ~15% of compression via syslog-auto pool
-- **Strix Halo (64GB, 128K ctx, Geneis Hermes V3 APEX)**: Agent reasoning, compression (~30% via syslog-auto pool), fallback for other GPUs
+### Rule 8: GPU Workload Distribution (UPDATED 2026-07-16)
+- **RTX 3090 (24GB, 128K ctx, qwen3.6-27B-code)**: Heavy reasoning, code gen, long conversations
+- **RTX 5070 (12GB, 128K ctx, gemma-4-12b)**: Vision, web search, quick tasks, web_extract (IQ4_NL+MTP, ~65% VRAM at 128K)
+- **Strix Halo (64GB, 128K ctx, syslog-auto)**: Context compression, summarization, long docs
 - Agent profiles MUST route auxiliary tasks to the correct GPU:
-  - `auxiliary.vision.model: gpu-light` (RTX 5070)
-  - `auxiliary.web_extract.model: gpu-light` (RTX 5070)
-  - `auxiliary.compression.model: syslog-auto` (distributed pool, switched from strix-moe 2026-07-18)
+  - `auxiliary.vision.model: gemma-4-12b` (RTX 5070)
+  - `auxiliary.web_extract.model: gemma-4-12b` (RTX 5070)
+  - `auxiliary.compression.model: syslog-auto` (Strix Halo)
 - Default model (`model.default`) and custom_provider remain `syslog-auto` for auto-routing
 - For 128K context window: `threshold: 0.65` (fires at ~85K tokens)
 - Do NOT use `threshold: 0.25` — this fires at 65K, causing premature context loss
@@ -292,6 +296,7 @@ The following MUST be identical across ALL profiles:
 - See `devops-hermes-compression` skill for full reference
 
 ### Rule 10: Default Model Must Be `syslog-auto` (All Agents)
+- **Koby Exception**: Per captain ruling 2026-08-11, Koby is a DeepSeek-primary external agent; its primary model remains `deepseek-v4-flash` (via api.deepseek.com to preserve DeepSeek-specific reasoning, while other sections follow Rule 10.
 - **Hermes agents**: `model.default: syslog-auto`, `custom_providers[0].model: syslog-auto`
 - **pi agents**: `defaultModel: syslog-auto` in `settings.json`, first model in `models.json`
 - `syslog-auto` is the LiteLLM routing model — it load-balances between strix-moe
@@ -320,10 +325,13 @@ verify ALL FOUR of these against the live config. They are the only root causes
 1. **max_context_window correct?** — BOTH `compression.max_context_window` AND `context.max_context_window`
    MUST be `131072` (all GPUs are 128K). A value of `262144` causes instability near 100K and must NOT be used.
    ~83K instead of ~170K. Check: `grep -n max_context_window ~/.hermes/config.yaml`
-2. **base_url uses /v1 NOT /litellm/v1?** — `custom_providers[0].base_url`, `delegation.base_url`,
-   and ALL `auxiliary.*.base_url` MUST be `http://192.168.68.116/v1` (Rule 5). nginx `/litellm/`
-   has a 60s default timeout → 504 on any inference >60s; `/v1/` has 600s.
-   Check: `grep -n 'litellm/v1' ~/.hermes/config.yaml` (must return NOTHING)
+2. **base_url uses authenticated path?** — `custom_providers[0].base_url`, `delegation.base_url`,
+   and ALL `auxiliary.*.base_url` MUST be `http://192.168.68.116/litellm/v1` (Rule 5, canonical)
+   or `http://192.168.68.116/v1` (legacy, still authenticated via nginx). BOTH verified 200 with
+   key + 600s proxy_read_timeout on 2026-08-09. Never bare `:4000` direct.
+   Check: `grep -nE 'base_url: http://192.168.68.116(:4000)?/v1' ~/.hermes/config.yaml` — the
+   ONLY paths allowed are `/v1` or `/litellm/v1` (both via nginx :80).
+   `:4000` or missing `litellm/v1`/`v1` prefix = violation.
 3. **LITELLM_API_KEY valid?** — The key must be a real LiteLLM key (`sk-` + 64 hex, 67 chars).
    Malformed values (e.g. `sk-_SWAl_Vu_…`, 47 chars) return 401 → DeepSeek fallback.
    Verify: `curl -s -o /dev/null -w '%{http_code}' -H "Authorization: Bearer $LITELLM_API_KEY" http://192.168.68.116/v1/models` (must be 200)
@@ -378,6 +386,35 @@ curl -s -o /dev/null -w '%{http_code}' -H "Authorization: Bearer $K" http://192.
 - `/etc/environment` is NO LONGER the canonical key source (stale values there caused 401s).
 - Do NOT leave a hardcoded stale key in `/etc/environment` — it shadows the drop-in/wrapper.
 
+### Rule 14: Provider Name Must Match custom_providers Name (ADDED 2026-07-19, WAL #1471)
+
+- `model.provider` MUST be `harness` (the `custom_providers[0].name`), NOT the literal string `custom`
+- When `provider: custom`, Hermes' `_get_named_custom_provider("custom")` returns None (no provider is
+  named "custom" — it is named "harness"), causing a fall-through to the generic resolution path
+  (`source: env/config`) at `runtime_provider.py:1156`
+- The generic path builds `api_key_candidates` from `model.api_key` (empty), host-gated
+  OLLAMA/OPENAI/OPENROUTER keys, and `_host_derived_api_key` (returns "" for IP addresses)
+- **The generic path does NOT resolve `model.api_key_env` or `custom_providers.key_env`** —
+  `LITELLM_API_KEY` is never read, producing `api_key = "no-key-required"` → HTTP 401
+- The named custom provider path (`source: custom_provider:harness`) DOES read `key_env` —
+  but only triggers when `provider` matches the `custom_providers[0].name`
+- All sections MUST use `provider: harness`: `model`, `compression`, `auxiliary.vision`,
+  `auxiliary.web_extract`, `auxiliary.compression`, `delegation`
+- Only `fallback_providers` uses a different provider (`deepseek`) for true fallback diversity
+- **Diagnostic**: If you see `source: env/config` in a request dump or log, the provider name
+  is wrong. It should be `source: custom_provider:harness`.
+- **Audit script**: Run `python3 /root/prose-contracts/audit-hermes-config.py <config.yaml>`
+  before and after any config change to catch this and all other rule violations.
+
+### Rule 15: MCP Endpoint and Header Validation (ADDED 2026-08-07)
+- Every MCP server entry must point at the correct endpoint:
+  - ra-h-os = http://192.168.68.65:3100/mcp
+  - litellm = https://litellm.sysloggh.net/mcp
+- MCP entries must carry a REAL key value in the header.
+  - Avoid using env-var names like LITELLM_API_KEY in the header; they do not resolve for MCP
+    endpoints and result in "Malformed API Key" floods.
+  - Ensure the header value is the actual key (e.g., `sk-...`).
+
 ## Execution
 
 1. **Check current config** — Read the target agent's config.yaml
@@ -387,3 +424,13 @@ curl -s -o /dev/null -w '%{http_code}' -H "Authorization: Bearer $K" http://192.
 5. **Set model choice** — Per agent's workload
 6. **Verify** — curl all shared endpoints, test the model with the new key
 7. **Report** — What was changed, preserved, custom
+### Rule 16: Koby Configuration (DeepSeek-primary)
+(Ref: See Rule 10 for default model behavior, with Koby exception)
+
+Koby uses a split-model architecture:
+
+- Primary Model: `deepseek-v4-flash` via `api.deepseek.com` (for reasoning)
+- Auxiliary Models: `gpu-light` (vision/web_extract) and `syslog-auto` (compression)
+- Key Hygiene: `api_key_env` is strictly `LITELLM_API_KEY` or `DEEPSEEK_API_KEY`
+- Constraint: Do NOT touch Koby's primary model/provider/compression settings unless explicitly ruled by the captain.
+

hermes-key-enforcement.prose.md

@@ -34,11 +34,12 @@ Syslog is migrating away from **unauthenticated direct access** to the shared in
 
 | Path | Auth | Status |
 |------|------|--------|
-| `http://192.168.68.116/v1` | None (direct) | ❌ **DEPRECATED** — being phased out |
-| `http://192.168.68.116/litellm/v1/responses` | Bearer `sk-*` key | ✅ **CURRENT** — authenticated LiteLLM proxy |
+| `http://192.168.68.116/v1` | Bearer `sk-*` key (nginx-fronted) | ✅ **VALID** — authenticated via nginx :80 (verified 2026-08-09: 401 without key, 200 with) |
+| `http://192.168.68.116/litellm/v1` | Bearer `sk-*` key (nginx-fronted) | ✅ **CURRENT / CANONICAL** — captain-approved migration target; 600s proxy_read_timeout (verified) |
+| `http://192.168.68.116:4000/v1` | Bearer `sk-*` key (direct container) | ❌ **FORBIDDEN** — bypasses nginx; port 4000 direct is not a config path |
 
-All harness/litellm providers MUST use the authenticated `/litellm/v1/responses` path.
-Any `base_url` pointing to bare `/v1` on 192.168.68.116 is a **migration violation**.
+All harness/litellm providers MUST use an authenticated nginx-fronted path (`/litellm/v1` canonical, `/v1` legacy-valid).
+Any `base_url` pointing at `:4000` or a bare IP without nginx is a **migration violation**.
 
 ### 🔥 CRITICAL: Double-Path Bug (2026-07-10)
 
@@ -189,23 +190,23 @@ litellm_settings:
 | Agent | CT | IP | LiteLLM Alias | Key Source | Status | Gateway Wrapper | Last Verified |
 |-------|-----|-----|---------------|------------|--------|-----------------|---------------|
 | Tanko | 112 | .122 | `tanko` | Infisical vault | ✅ Fixed | `infisical run` | 20:17 UTC Jul 5 |
-| Mumuni | 114 | .123 | `mumuni` | Infisical vault | ✅ Fixed | `infisical run` | 01:46 EDT Jul 10 |
-| Koby | 111 | ? | `koby` | Infisical vault | ✅ Fixed | `infisical run` | 23:30 UTC Jul 5 |
-| Koonimo | 113 | ? | `koonimo` | Infisical vault | ✅ Fixed | `infisical run` (migrated 2026-07-11) | 2026-07-11 |
+| Mumuni | 100 (abiba) | .24 | `mumuni` | Infisical vault | ✅ Fixed | Pi Hermes gateway | 2026-07-27 |
+| Koby | 111 | .129 | `koby` | Infisical vault | ✅ Fixed (DeepSeek-primary) | `infisical run` | 23:30 UTC Jul 5 |
+| Koonimo | 113 | .114 | `koonimo` | Infisical vault | ✅ Fixed | `infisical run` (migrated 2026-07-11) | 2026-08-09 |
 | Abiba | 100 | .65 | `abiba-pi` | Infisical vault | ✅ N/A (pi native) | — | 19:44 UTC Jul 5 |
-| Kagenz0 | 105 | ? | — | — | ❌ DOWN | — | 19:14 EDT Jul 4 |
+| Kagenz0 | 105 | .14 | — | — | ❌ DOWN | — | 19:14 EDT Jul 4 |
 
 > **Note**: CT hostnames (tdunna, baggy) differ from agent identities (koby, koonimo).
 > LiteLLM key aliases use agent identity, not CT hostname.
 
 ### Migration Status: Authenticated Path
 
-| Agent | `/litellm/v1/responses` | Deprecated `/v1` | Status |
-|-------|--------------------------|--------------------|--------|
-| Mumuni | ✅ 5 sections | 0 | ✅ Authenticated |
-| Tanko | ⚠️ No SSH access | — | Needs check |
-| Koby | ⚠️ No route to host | — | Needs check |
-| Koonimo | ⚠️ Connection timed out | — | Needs check |
+| Agent | `/litellm/v1` | Legacy `/v1` | Status |
+|-------|--------------|-------------|--------|
+| Mumuni | ✅ harness provider | ✅ auxiliary on /v1 (valid) | ✅ Authenticated (verified 2026-08-09) |
+| Tanko | ✅ 5 sections | 0 | ✅ Migrated 2026-08-08, keys 200 |
+| Koby | ✅ custom provider (harness name) | — | ✅ External DeepSeek primary (intentional, captain ruling 2026-08-11) |
+| Koonimo | ✅ .114 (baggy) | — | ✅ 128K context applied 2026-08-09 |
 
 ### Systemd Service Pattern (2026-07-11 — vault migration)
 

hermes-zulip-plugin.prose.md

@@ -28,7 +28,7 @@ connectivity recovery including end-to-end DM validation.
 
 | Param | Type | Required | Default | Description |
 |-------|------|----------|---------|-------------|
-| `target` | string | yes | — | Agent name: `mumuni`, `tanko`, `koby`, or `shumba` |
+| `target` | string | yes | — | Agent name: `mumuni`, `koby`, or `shumba` (Tanko excluded — on DSH since 2026-08-27, no Hermes plugin) |
 | `branch` | string | no | `master` | Git branch to pull (overridable for pinning) |
 
 ## Maintains
@@ -55,8 +55,8 @@ connectivity recovery including end-to-end DM validation.
 
 | Host | CT | Proxmox | IP (direct) | Hermes Home | User |
 |------|-----|---------|-------------|-------------|------|
-| Mumuni | CT114 | — | 192.168.68.123 | /root/.hermes | root |
-| Tanko | CT112 | amdpve | 192.168.68.122 | /home/jerome/.hermes | jerome |
+| Mumuni | CT100 | — | 192.168.68.24 | /root/.hermes | root |
+| Tanko | CT112 | amdpve | 192.168.68.122 | /home/jerome/.hermes | jerome | *(DSH since 2026-08-27 — historical, plugin retired on this host)* |
 | Koby | CT111 | amdpve | 192.168.68.129 | /root/.hermes | root |
 | Shumba | — | — | 192.168.68.119 | /home/lucky/.hermes | lucky |
 
@@ -121,7 +121,8 @@ cp plugins/platforms/zulip/adapter.py \
    plugins/platforms/zulip/plugin.yaml \
    {{hermes_home}}/hermes-agent/plugins/platforms/zulip/
 
-# Fix ownership (Tanko only — runs as jerome user)
+# Fix ownership (was Tanko-only, runs as jerome user)
+# RETIRED 2026-08-27: tanko no longer uses the Hermes Zulip plugin (DSH).
 [ "{{target}}" = "tanko" ] && chown -R jerome:jerome \
   {{hermes_home}}/hermes-agent/plugins/platforms/zulip/
 

hermes-zulip-restore.prose.md

@@ -2,8 +2,10 @@
 kind: function
 name: hermes-zulip-restore
 description: >
-  Restores Zulip connectivity for any Hermes agent (Mumuni CT114, Tanko CT112,
-  Koby CT111, Shumba on Lucky's mini PC). Deploys the zulip-platform adapter to the correct bundled plugin
+  Restores Zulip connectivity for any Hermes agent (Mumuni CT100, Koby CT111,
+  Shumba on Lucky's mini PC). Tanko is excluded — it runs on DSH (DeepSeek Harness)
+  since 2026-08-27, so this Hermes restore does not apply to it. Deploys the
+  zulip-platform adapter to the correct bundled plugin
   path, verifies env credentials, restarts the gateway, and confirms Zulip
   connects. Run this whenever a Hermes agent stops responding on Zulip or after
   a fresh agent deployment.
@@ -23,7 +25,7 @@ gateway restart, and connection validation.
 
 | Param | Type | Required | Default | Description |
 |-------|------|----------|---------|-------------|
-| `target` | string | yes | — | Agent name: `mumuni`, `tanko`, `koby`, or `shumba` |
+| `target` | string | yes | — | Agent name: `mumuni`, `koby`, or `shumba` (Tanko excluded — DSH since 2026-08-27) |
 
 ## Maintains
 
@@ -36,7 +38,7 @@ gateway restart, and connection validation.
 
 - `_strip_html` function present in `<hermes-agent>/plugins/platforms/zulip/adapter.py`
 - All three adapter files (__init__.py, adapter.py, plugin.yaml) present at bundled path
-- Zulip env vars set in `~/.hermes/.env` (or `/home/jerome/.hermes/.env` for Tanko)
+- Zulip env vars set in `~/.hermes/.env` (or `/home/jerome/.hermes/.env` for Tanko, historical — DSH since 2026-08-27)
 - Gateway restarted and zulip platform reports state `connected`
 - HTML stripping enabled for `/approve` and `/deny` slash command support
 
@@ -51,8 +53,8 @@ gateway restart, and connection validation.
 
 | Host | CT | Proxmox | IP (direct) | Hermes Home | User |
 |------|-----|---------|-------------|-------------|------|
-| Mumuni | CT114 | hwepve | 192.168.68.123 | /root/.hermes | root |
-| Tanko | CT112 | amdpve | 192.168.68.122 | /home/jerome/.hermes | jerome |
+| Mumuni | CT100 (abiba) | minipve | 192.168.68.24 | /root/.hermes | root |
+| Tanko | CT112 | amdpve | 192.168.68.122 | /home/jerome/.hermes | jerome | *(DSH since 2026-08-27 — historical, restore does not apply)* |
 | Koby | CT111 | amdpve | 192.168.68.129 | /root/.hermes | root |
 | Shumba | — | — | 192.168.68.119 | /home/lucky/.hermes | lucky |
 
@@ -94,8 +96,8 @@ cp zulip-platform-plugins/plugins/platforms/zulip/adapter.py \
    zulip-platform-plugins/plugins/platforms/zulip/plugin.yaml \
    <HERMES_HOME>/hermes-agent/plugins/platforms/zulip/
 
-# Fix ownership (Tanko only)
-chown -R jerome:jerome <HERMES_HOME>/hermes-agent/plugins/platforms/zulip/  # Tanko only
+# Fix ownership (was Tanko-only; RETIRED 2026-08-27 — tanko on DSH, no Hermes plugin)
+chown -R jerome:jerome <HERMES_HOME>/hermes-agent/plugins/platforms/zulip/  # Tanko only (historical)
 
 # Clean up
 rm -rf /tmp/zulip-deploy

inference-optimization.prose.md

@@ -22,14 +22,14 @@ management, and prompt caching — without sacrificing agent capability.
 - `agent-configs`: current config.yaml from each active Hermes agent (Mumuni
   .123, any others on .129/.122) including compression, model, context_window,
   prompt_caching, memory settings
-- `gpu-health`: health check response from all 3 GPU backends (ornith .15:8080,
+- `gpu-health`: health check response from all 3 GPU backends (strix-moe .15:8080,
   qwen .8:8080, gemma .110:8080)
 
 ### Maintains
 
 The optimized inference stack configuration — every change is applied and
 verified end-to-end. Postcondition: avg request_duration_ms ≤ 15000 for 90% of
-non-ornith traffic; ≤ 30000 for ornith-bound agentic calls.
+inference calls.
 
 #### liteLLM-routing
 The syslog-auto routing weights, model-specific timeouts, RPM limits, and
@@ -53,18 +53,17 @@ duration.
 
 ### Strategies
 
-**Context is the root cause.** Every ~46K prompt token costs ~87s of ornith
+**Context is the root cause.** Every ~46K prompt token costs ~87s of
 prefill time at 532 tok/s. Fix context first, routing second.
 
-- **Route by task**: ornith for multi-step reasoning only; qwen for code/standard
-  queries; gemma for compression/auxiliary. Never send simple completion to a
-  35B MoE.
-- **Compress aggressively**: threshold at 40% (not 65%) — a 256K window should
-  compact at 102K, not 166K. Target 15% tail (not 30%).
+- **Route by task**: qwen for code/standard queries; gemma for
+  compression/auxiliary; strix-moe for compression tasks.
+- **Compress aggressively**: threshold at 40% (not 65%) — a 128K window should
+  compact at 51K, not 85K. Target 15% tail (not 30%).
 - **Cache everything repeated**: system prompts, skill docs, AGENTS.md — these
   never change between turns. Single-digit cache hit rate is unacceptable.
 - **Lower context ceiling**: 128K window is the stable ceiling for agent conversations.
-  GPUs reduced from 256K to 128K (2026-07-17). For larger contexts, route to external providers.
+  GPUs reduced from 256K to 128K (2026-07-17). 128K window should compact at 85K (0.65 threshold). For larger contexts, route to external providers.
 
 ### Shape
 
@@ -88,7 +87,7 @@ call apply-liteLLM-routing
 
 call apply-agent-compression
   agent: mumuni
-  host: 192.168.68.123
+  host: 192.168.68.24
   config_path: /root/.hermes/config.yaml
 
 -- Phase 4: Enable llama.cpp prompt caching on GPU hosts
@@ -100,5 +99,5 @@ call enable-prompt-caching
 
 call verify-latency
   host: 192.168.68.116
-  models: [syslog-auto, qwen3.6-27B-code, gemma-4-12b, ornith-1.0-35b]
+  models: [syslog-auto, qwen3.6-27B-code, gemma-4-12b]
 ```

infrastructure-control.prose.md

@@ -3,7 +3,7 @@ kind: pattern
 name: infrastructure-control
 description: >
   Full infrastructure monitoring and control pattern covering the
-  6-node Proxmox cluster, 3 Docker ecosystems (22 containers),
+  5-node Proxmox cluster, 3 Docker ecosystems (22 containers),
   NFS storage, and network services. Defines monitors, remediations,
   and the access matrix for all environments.
 
@@ -12,6 +12,12 @@ description: >
   never mutate infrastructure based on them without first confirming
   against the live system. Policy fields are authoritative. See the
   `verify-before-mutate` skill.
+
+  **Last verified:** 2026-08-15 — hwepve removed from Tabiri cluster
+  (now 5 nodes: minipve, amdpve, storepve, acerpve, ocupve). hwepve
+  (192.168.68.4) is a standalone PVE node + NetBird routing peer;
+  London relocation pending. CTs 100 (abiba) and 105 (kagentz) moved
+  to minipve.
 ---
 
 # Infrastructure Control Pattern
@@ -29,21 +35,21 @@ description: >
    ┌─────────────┐    ┌──────────────┐    ┌──────────────┐
    │   Abiba     │    │   Tanko      │    │   Mumuni     │
    │   (pi)      │    │   (Hermes)   │    │   (Hermes)   │
-   │   CT 100    │    │   CT 112     │    │   CT 114     │
+   │   CT 100    │    │   CT 112     │    │   CT 100     │
    └──────┬──────┘    └──────┬───────┘    └──────┬───────┘
           │                  │                    │
           └──────────────────┼────────────────────┘
                              ▼
-          ┌──────────────────────────────────────┐
-          │         Proxmox Cluster API          │
-          │    minipve.sysloggh.net:443          │
-          │   (monitoring@pve!mumuni token)      │
-          └────┬──────┬──────┬──────┬──────┬─────┘
-               │      │      │      │      │
-          ┌────┘ ┌────┘ ┌────┘ ┌────┘ ┌────┘
-          ▼      ▼      ▼      ▼      ▼
-       minipve amdpve storepve acerpve ocupve  hwepve
-        (.12)   (.15)   (.6)    (.9)    (.5)    (.4)
+          ┌────────────────────────────────────┐
+          │         Proxmox Cluster API        │
+          │    minipve.sysloggh.net:443        │
+          │   (monitoring@pve!mumuni token)    │
+          └────┬──────┬──────┬──────┬──────────┘
+               │      │      │      │
+          ┌────┘ ┌────┘ ┌────┘ ┌────┘
+          ▼      ▼      ▼      ▼
+       minipve amdpve storepve acerpve ocupve
+        (.12)   (.15)   (.6)    (.9)    (.5)
 
           ▼
    ┌─────────────────────────────────────────────┐
@@ -85,7 +91,7 @@ description: >
 
 ### Reachability Matrix
 
-| From / To | PVE API | docker-vm (.7) | CT 116 | Tanko (.122) | Mumuni (.123) | Baggy (.114) |
+| From / To | PVE API | docker-vm (.7) | CT 116 | Tanko (.122) | Mumuni (.24) | Baggy (.114) |
 |-----------|---------|----------------|--------|-------------|---------------|----------------|
 | **Abiba** (.24) | ✅ :443 | ✅ SSH | ✅ SSH | ✅ SSH jerome | ✅ SSH root | ❌ SSH |
 | **Tanko** (.122) | ❌ | ❌ | ❌ via NetBird | ✅ | ❌ | ❌ |
@@ -95,16 +101,29 @@ description: >
 
 ## Section 2: Proxmox Cluster — Monitoring
 
-### Nodes (6)
+### Nodes (5)
 
 | Node | IP | CPU | RAM | VMs/CTs | Role |
 |------|----|-----|-----|---------|------|
-| minipve | .12 | 16C | 30GB | authentik, gitea, syslog-api, jitsi | Auth, git, messaging |
-| amdpve | .15 | 32C | 62GB | abiba, kagentz, tanko, tdunna, baggy, scottdenya | Agents, compute |
-| storepve | .6 | 28C | 31GB | docker-vm, ra-h-os, PBS, media, zulip | Docker, storage, chat |
-| acerpve | .9 | 28C | 31GB | llm-gpu, adguard | GPU VMs |
+| minipve | .12 | 16C | 30GB | abiba, kagentz, authentik, gitea, syslog-api, infisical-vault, jitsi | Auth, git, messaging |
+| amdpve | .15 | 32C | 62GB | tanko, tdunna, baggy, scottdenya | Agents, compute |
+| storepve | .6 | 28C | 31GB | docker-vm, ra-h-os, PBS, media, jdownloader, zulip | Docker, storage, chat |
+| acerpve | .9 | 28C | 31GB | llm-gpu | GPU VMs |
 | ocupve | .5 | 12C | 14GB | ocu-llm | GPU VMs |
-| hwepve | .4 | 12C | 15GB | mumuni | Huawei Matebook 16, agent host |
+
+> **Note:** CTs on storepve include jdownloader (CT 118). AdGuard (CT 102) is on
+> minipve at .10, not acerpve. Abiba (CT 100) and kagentz (CT 105) are on
+> minipve (moved from hwepve 2026-08-15). Mumuni runs inside Abiba CT100
+> (.24); CT 114 (mumuni) no longer exists in the cluster.
+>
+> **hwepve (192.168.68.4) — STANDALONE (removed from Tabiri 2026-08-15):**
+> Huawei MateBook 16 (KLVL-WXX9), pve-manager/9.2.10, kernel 7.0.14-8-pve.
+> Zero VMs/CTs. Being relocated to London as a standalone PVE node + NetBird
+> routing peer (relocation pending). Localizations applied: timezone
+> Europe/London, lid-switch ignore, sleep/suspend/hibernate targets masked,
+> cluster-shared storage removed (remaining: local, local-lvm, storage,
+> mediastore). prometheus-node-exporter active on :9100; net.ipv4.ip_forward=1;
+> NetBird client not yet installed (enrollment pending setup key).
 
 ### Checks (every 5 min)
 
@@ -118,7 +137,7 @@ description: >
 
 ## Checks
 
-- For each node in [minipve, amdpve, storepve, acerpve, ocupve, hwepve]:
+- For each node in [minipve, amdpve, storepve, acerpve, ocupve]:
   - GET /api2/json/nodes/{node}/status → check status == "online"
   - GET /api2/json/nodes/{node}/status → cpu < 0.80
   - GET /api2/json/nodes/{node}/status → free_mem > 10%
@@ -151,7 +170,7 @@ description: >
 |-------|------|-----------|
 | **Firecrawl** | `/opt/search-stack/firecrawl-source/` | api, rabbitmq, postgres, playwright, redis |
 | **SearXNG** | `/opt/search-stack/searxng/` | searxng, valkey |
-| **Home stack** | `/opt/home_stack/` | jdownloader, stirling-pdf, pulse |
+| **Home stack** | `/opt/home_stack/` | stirling-pdf, pulse (jdownloader decommissioned 2026-08-01 → dedicated CT 118 LXC) |
 | **Audiobookshelf** | `/opt/audiobookshelf/` | audiobookshelf |
 | **Trove agents** | docker run (standalone) | trove-agent-proxmox, trove-test-agent-1, trove-test-server-1, docker-stats |
 
@@ -168,11 +187,15 @@ description: >
 - Compose: `/opt/home_stack/docker-compose.yml`
 - Control script: `/opt/home_stack/infra-control.sh`
 
-**JDownloader**:
-- URL: `http://192.168.68.7:5800` (web UI via VNC)
+**JDownloader** (decommissioned from docker-vm 2026-08-01 — moved to dedicated CT 118 LXC):
+- LXC: CT 118 on storepve, `192.168.68.20` (JDownloader + VNC 5900 + web UI 6080)
+- Web UI: `http://192.168.68.20:6080` (noVNC via websockify)
+- Docker container `jdownloader-2` on .7 removed; compose entry stripped
 
-**Pulse** (Uptime Kuma):
-- URL: `http://192.168.68.7:3001`
+**Pulse**:
+- URL: `http://192.168.68.7:7655` (direct LAN)
+- Public: `https://pulse.sysloggh.net` (NetBird CNAME proxy)
+- Container: `rcourtman/pulse:5.1.35` in `/opt/home_stack` (port 7655, was 3001)
 
 ### Ecosystem B: CT 116 syslog-api (192.168.68.116)
 
@@ -200,7 +223,7 @@ description: >
 **Prometheus targets**:
 - 192.168.68.8:9400 (RTX 3090 — qwen)
 - 192.168.68.110:9400 (RTX 5070 — gemma)
-- 192.168.68.15:9400 (Strix Halo — ornith)
+- 192.168.68.15:9400 (Strix Halo — qwen3.6-35B-udq4)
 - 192.168.68.24:9401 (Router metrics exporter)
 - harness-litellm:4000 (LiteLLM health)
 
@@ -355,16 +378,18 @@ fine. Services that resolve directly to a LAN IP are NetBird-independent.
 |---------|--------|-------------|-------------|-------------|--------|
 | Proxmox API | minipve.sysloggh.net:8006 | 192.168.68.12 | LAN IP | No | ✅ |
 | LiteLLM | litellm.sysloggh.net | 192.168.68.116 | LAN IP | No | ✅ |
-| Authentik | auth.sysloggh.net:443 | 192.168.68.11 | CNAME → netbird | **Yes** | ⚠️ |
-| Gitea | git.sysloggh.net:443 | 192.168.68.110 | CNAME → netbird | **Yes** | ⚠️ |
+| Authentik | auth.sysloggh.net:443 | 192.168.68.11:9000 | CNAME → netbird | **Yes** | ⚠️ |
+| Gitea | git.sysloggh.net:443 | 192.168.68.17:3000 | CNAME → netbird | **Yes** | ⚠️ |
 | Zulip | chat.sysloggh.net:443 | 192.168.68.19 | CNAME → netbird | **Yes** | ⚠️ VERIFY-BEFORE-USE |
-| Pulse | pulse.sysloggh.net:443 | 192.168.68.7 | CNAME → netbird | **Yes** | ⚠️ |
-| DNS UI | dns.sysloggh.net:443 | 192.168.68.102 | CNAME → netbird | **Yes** | ⚠️ |
+| Pulse | pulse.sysloggh.net:443 | 192.168.68.7:7655 | CNAME → netbird | **Yes** | ✅ verified 2026-08-01 |
+| DNS UI | dns.sysloggh.net:443 | 192.168.68.10:80 | CNAME → netbird | **Yes** | ⚠️ |
 | SearXNG | searxng.sysloggh.net:8888 | 192.168.68.7:8888 | LAN IP | No | ✅ |
 | Firecrawl | firecrawl.sysloggh.net:3002 | 192.168.68.7:3002 | LAN IP | No | ✅ |
 
-**Verified 2026-07-02:** NetBird VPS rebooted after a hang; all CNAME'd
+**Verified 2026-07-24:** NetBird VPS rebooted after a hang; all CNAME'd
 services recovered. LAN-IP-direct paths stayed up throughout the outage.
+Also added `dns.sysloggh.net` route (was missing entirely).
+See `scripts/netbird-add-domain.sh` for adding new proxy routes.
 
 ### 5.2 Checks (every 2 min)
 
@@ -512,8 +537,8 @@ enforced by the `routing-regression.config_url_violations` check in Section
 | LiteLLM API | `http://192.168.68.116:4000` | `https://litellm.sysloggh.net` |
 | LiteLLM (nginx) | `http://192.168.68.116` | — |
 | Grafana | `http://192.168.68.116:3001` | — |
-| Authentik | `https://192.168.68.11` | `https://auth.sysloggh.net` |
-| Gitea | `http://192.168.68.110:3000` | `https://git.sysloggh.net` |
+| Authentik | `https://192.168.68.11:9000` | `https://auth.sysloggh.net` |
+| Gitea | `http://192.168.68.17:3000` | `https://git.sysloggh.net` |
 | Zulip API | `http://192.168.68.19` | `https://chat.sysloggh.net` |
 | SearXNG | `http://192.168.68.7:8888` | — |
 | Firecrawl | `http://192.168.68.7:3002` | — |
@@ -576,25 +601,25 @@ ssh root@192.168.68.110 "systemctl restart llama-server"
 
 | CT | Name | Node | IP | Role | Agent |
 |----|------|------|----|------|-------|
-| 100 | abiba | amdpve | .24 | Pi agent (this host) | ✅ pi |
+| 100 | abiba | minipve | .24 | Pi agent | ✅ pi |
 | 101 | llm-gpu | acerpve | .8 | GPU RTX 3090 | ❌ |
-| 102 | adguard | acerpve | — | DNS | ❌ |
+| 102 | adguard | **minipve** | **.10** | DNS | ❌ |
 | 103 | ocu-llm | ocupve | .110 | GPU RTX 5070 | ❌ |
 | 104 | authentik | minipve | .11 | OIDC | ❌ |
-| 105 | kagentz | amdpve | — | Agent Zero | ✅ |
+| 105 | kagentz | minipve | — | Agent Zero | ✅ |
 | 106 | ra-h-os | storepve | .65 | KG bridge | ✅ MCP |
 | 107 | pbs | storepve | — | Backups | ❌ |
 | 108 | media | storepve | — | Media | ❌ |
 | 109 | docker-vm | storepve | .7 | Docker host | ❌ |
-| 110 | gitea | minipve | — | Git | ❌ |
+| 110 | gitea | minipve | **.17** | Git | ❌ |
 | 111 | tdunna | amdpve | .129 | Hermes agent | ✅ |
-| 112 | tanko | amdpve | .122 | Hermes agent | ✅ |
-| 113 | baggy | amdpve | ? | Hermes agent | ✅ |
-| 114 | mumuni | hwepve | .123 | Hermes agent | ✅ |
-| 115 | scottdenya | amdpve | — | ? | ❌ |
+| 112 | tanko | amdpve | .122 | DSH (DeepSeek Harness) agent | ✅ |
+| 113 | baggy | amdpve | .114 | Hermes agent | ✅ |
+| 115 | scottdenya | amdpve | .75 | Denya OneCare | ❌ |
 | 116 | syslog-api | minipve | .116 | LiteLLM + Grafana | ❌ |
-| 117 | zulip | storepve | — | Chat | ❌ |
-| 118 | jitsi | minipve | — | Video | ❌ |
+| 117 | zulip | storepve | .19 | Chat | ❌ |
+| 118 | jdownloader | storepve | .20 | JDownloader LXC (dedicated, migrated from docker-vm 2026-08-01) | ✅ |
+| 119 | infisical-vault | minipve | — | Vault | ❌ |
 
 ## Appendix C: Docker Compose Files Location
 
@@ -614,27 +639,27 @@ Source of truth: `/root/scripts/pct-run.sh` or `prose-contracts/scripts/pct-run.
 
 | CT | Name | Node | pct-run |
 |-----|------|------|---------|
-| 100 | abiba | amdpve | `pct-run 100` |
-| 105 | kagentz | amdpve | `pct-run 105` |
+| 100 | abiba | minipve | `pct-run 100` |
+| 105 | kagentz | minipve | `pct-run 105` |
 | 111 | tdunna | amdpve | `pct-run 111` |
 | 112 | tanko | amdpve | `pct-run 112` |
 | 113 | baggy | amdpve | `pct-run 113` |
 | 115 | scottdenya | amdpve | `pct-run 115` |
 | 104 | authentik | minipve | `pct-run 104` |
 | 110 | gitea | minipve | `pct-run 110` |
-| 114 | mumuni | hwepve | `pct-run 114` |
 | 116 | syslog-api | minipve | `pct-run 116` |
 | 106 | ra-h-os | storepve | `pct-run 106` |
 | 107 | proxmox-backup | storepve | `pct-run 107` |
 | 108 | media | storepve | `pct-run 108` |
 | 117 | zulip | storepve | `pct-run 117` |
-| 102 | adguard | acerpve | `pct-run 102` |
+| 102 | adguard | **minipve** | `pct-run 102` |
 
 GPU bare-metal hosts (.8 acerpve, .110 ocupve, .15 amdpve) are NOT CTs — use SSH directly:
 ```bash
 ssh root@192.168.68.8   # RTX 3090
 ssh root@192.168.68.110 # RTX 5070
 ssh root@192.168.68.15  # Strix Halo
+ssh root@192.168.68.4   # hwepve — standalone London node + NetBird routing peer (relocation pending)
 ```
 
 ## Section 7: Agent Health Check (consolidated — 2026-07-05)

infrastructure-maintenance.prose.md

@@ -140,7 +140,8 @@ After ALL updates (apt + images + restarts), verify every critical service is ba
 | Zulip | `curl -sf https://chat.sysloggh.net/api/v1/server_settings` | 200 OK |
 | Gitea | `curl -sf https://git.sysloggh.net/api/v1/version` | 200 OK |
 | PM2 processes | `pm2 jlist` (CT 100) | all pi-agent processes `online` |
-| Hermes gateways | SSH to Mumuni CT 114, Tanko CT 112; `systemctl is-active hermes-gateway` | `active` for each |
+| Hermes gateways | SSH to Mumuni CT 100; `systemctl is-active hermes-gateway` | `active` |
+| Tanko (DSH) | DSH harness service on CT 112 (.122) | `active` |
 
 Regression check: every service that was GREEN in `health-baseline` must still be GREEN. A service that was already RED (and caused a preflight abort) is excluded — but Phase 0 should have aborted before we got here.
 

infrastructure-monitoring.prose.md

@@ -7,13 +7,15 @@ description: >
   from nvidia-smi (.8, .110) and amdgpu_top (.15). LiteLLM metrics
   via existing /metrics Prometheus endpoint.
   
-  DEPLOYMENT STATUS (2026-07-09):
+  DEPLOYMENT STATUS (2026-08-09):
   ✅ Core stack deployed: Prometheus + Grafana + pve/node/docker exporters
-     (via proxmox-monitor contract). Grafana at :3001, 5 scrape targets active.
-  ❌ GPU exporters NOT deployed: gpu-exporter crash-loops on .15,
-     NVIDIA sidecar exporters (.8/.110:9400) never installed.
-     Router falls back to direct GPU /health probes.
-  ⚠️ This contract is target-state aspirational — not as-built.
+     (via proxmox-monitor contract). Grafana at :3001, all scrape targets active.
+  ✅ GPU exporters DEPLOYED: all 3 GPU hosts (.8/.110/.15) run exporters on
+     :9400 (nvidia_gpu_exporter / amdgpu exporter) — verified 200 on 2026-08-09.
+  ✅ LiteLLM /metrics scraping live (success_callback: prometheus; auth via
+     master key) + Alertmanager + Zulip bridge (alerts-infra) added 2026-08-09.
+  ⚠️ This contract is target-state aspirational — but GPU export + alerting
+     are now as-built (verified 2026-08-09).
      As-built GPU monitoring is via gpu-monitor contract (port 9100 poll).
 version: 1.0.0
 ---
@@ -100,6 +102,39 @@ GPU .8 (RTX 3090)    GPU .110 (RTX 5070)   GPU .15 (Strix Halo)
 - Stack persists across reboots (systemd for exporters, Docker restart policy)
 
 ## Execution
+### check-health
+
+**RUN LIVE, NEVER ECHO — every dispatch must execute the probes below with real tool calls; never repeat a prior report unless a live probe fails.**
+
+```bash
+# Zulip API health (POST ping)
+curl -s -o /dev/null -w '%{http_code}' -X POST https://chat.sysloggh.net/api/v1/messages -u 'abiba-bot@chat.sysloggh.net:KEY'
+# Expected: 200 (HTTP 000 = unreachable/cache)
+
+# PM2 process health
+pm2 jlist
+# Expected: 5/5 online (abiba-telegram, abiba-zulip, zulip-watchdog, gitea-runner, spoton-service)
+
+# GPU exporters (may be down per DEPLOYMENT STATUS)
+curl -s http://192.168.68.8:9400/metrics && echo " - OK" || echo " - FAIL"
+curl -s http://192.168.68.110:9400/metrics && echo " - OK" || echo " - FAIL"
+curl -s http://192.168.68.15:9400/metrics && echo " - OK" || echo " - FAIL"
+
+# Prometheus targets
+curl -s http://192.168.68.116:9090/api/v1/targets | jq '.data.activeTargets'
+# Expected: All targets UP (may show some down if exporters not deployed)
+
+# Grafana health
+curl -s http://192.168.68.116:3001/api/health | jq '{status, version}'
+# Expected: {"status":"ok","version":"..."}
+
+# LiteLLM metrics
+curl -s http://192.168.68.116:4001/metrics | head -20
+# Expected: Prometheus-formatted metrics output
+```
+
+**Report format**: Summarize actual results from each probe. If any probe returns non-200 or empty output, flag as alert.
+
 
 ### Phase 1: GPU Exporters
 

infrastructure-update.prose.md

@@ -2,7 +2,7 @@
 kind: responsibility
 name: infrastructure-update
 description: >
-  Autonomous system-wide update contract covering all 6 Proxmox nodes,
+  Autonomous system-wide update contract covering all 5 Proxmox nodes,
   15+ containers/VMs, and 4 Docker ecosystems. Updates apt packages,
   Docker images, and container stacks in safe waves with health checks
   and automatic rollback on failure.
@@ -56,11 +56,10 @@ Before ANY update wave:
 | amdpve (.15) | Proxmox node | `apt update && apt upgrade -y` | 5 min |
 | acerpve (.9) | Proxmox node | `apt update && apt upgrade -y` | 5 min |
 | ocupve (.5) | Proxmox node | `apt update && apt upgrade -y` | 5 min |
-| hwepve (.4) | Proxmox node | `apt update && apt upgrade -y` | 5 min |
 | CT 100 (.24) | Abiba (pi) | `apt update && apt upgrade -y` | 3 min |
 | CT 116 (.116) | syslog-api (LiteLLM host) | `apt update && apt upgrade -y` | 3 min |
 | CT 112 (tanko, amdpve) | Tanko | `apt update && apt upgrade -y` | 3 min |
-| CT 114 (mumuni, hwepve) | Mumuni | `apt update && apt upgrade -y` | 3 min |
+| CT 100 (mumuni/abiba, minipve) | Mumuni | `apt update && apt upgrade -y` | 3 min |
 | VM 101 (.8) | llm-gpu (RTX 3090) | `apt update && apt upgrade -y` | 3 min |
 | VM 103 (.110) | ocu-llm (RTX 5070) | `apt update && apt upgrade -y` | 3 min |
 
@@ -68,7 +67,7 @@ Before ANY update wave:
 - All VMs/CTs running: check via Proxmox API
 - LiteLLM healthy: `curl localhost:4000/health/liveliness` (via CT 116)
 - LiteLLM MCP tools: `curl localhost:4000/mcp-rest/tools/list -H "Authorization: Bearer $MASTER_KEY"` → 90 tools
-- GPU servers responding: check :8080 on VM 101, VM 103; check ornith via router (http://192.168.68.116/health/unified — .15:8080 is firewalled to .116 only)
+- GPU servers responding: check :8080 on VM 101, VM 103; check strix-moe via router (http://192.168.68.116/health/unified — .15:8080 is firewalled to .116 only)
 - Zulip agents connected: check Mumuni/Tanko gateway state
 - Abiba PM2 processes online: `pm2 status`
 
@@ -78,7 +77,7 @@ Before ANY update wave:
 |------|-------|---------|
 | VM 109 (.7) | Firecrawl | `cd /opt/search-stack/firecrawl-source && docker compose pull && docker compose up -d` |
 | VM 109 (.7) | SearXNG | `cd /opt/search-stack/searxng && docker compose pull && docker compose up -d` |
-| VM 109 (.7) | Home stack (Pulse, Stirling PDF, JDownloader 2) | `cd /opt/home_stack && docker compose pull && docker compose up -d` |
+| VM 109 (.7) | Home stack (Pulse, Stirling PDF) — JDownloader moved to CT 118 LXC 2026-08-01 | `cd /opt/home_stack && docker compose pull && docker compose up -d` |
 | VM 109 (.7) | Audiobookshelf | `cd /opt/audiobookshelf && docker compose pull && docker compose up -d` |
 | CT 116 (.116) | Inference Harness (LiteLLM, Prometheus, Grafana) | `cd /opt/inference-harness && docker compose pull && docker compose up -d` |
 | CT 117 (zulip, storepve) | Zulip | `docker pull zulip/docker-zulip:latest && docker restart zulip-zulip-1` |
@@ -92,17 +91,52 @@ Before ANY update wave:
 - Firecrawl test: `curl :3002/`
 - SearXNG test: `curl :8888`
 
-## Wave 4: Proxmox Kernel Reboot (if needed)
+## Wave 4: Proxmox Kernel Reboot
 
 Only if `[ -f /var/run/reboot-required ]` on any node.
 
 | Target | Action |
 |--------|--------|
 | Affected PVE node | Verify all CTs/VMs migrated or stopped |
-| | `reboot` via PVE API |
+| | `reboot` via PVE API (or `systemctl reboot -f` if dbus fails) |
 | | Wait 120s for node to come back |
 | | Start any stopped CTs |
 
+### Post-reboot sweep (known gaps)
+
+After every node reboot, run these checks:
+
+1. **CT auto-start sweep** — LXC containers sometimes don't start despite
+   `onboot: 1`. Check every CT on the rebooted node and start any left stopped:
+   ```bash
+   pct list | awk '/stopped/{print $1}' | xargs -I{} pct start {}
+   ```
+   Known cases: scottdenya (CT 115 on amdpve), authentik (CT 104 on minipve).
+
+2. **Zulip recovery** — When docker-vm or storepve reboots, the Zulip main
+   container loses its Docker network assignment (SIGKILL during storage
+   outage detaches it from `zulip_default` network). Run:
+   ```bash
+   ssh root@192.168.68.19 'docker rm -f zulip-zulip-1 && cd /opt/zulip && docker compose up -d'
+   ```
+   The compose restart recreates the container on the correct network.
+
+3. **docker-vm Docker daemon** — After reboot, Docker can take 3-4 minutes
+   to become `active`. The docker-proxy for Pulse (port 7655) starts early,
+   so Pulse is accessible before `docker ps` reports ready. Wait for Docker
+   before checking other stacks.
+
+### VPS ↔ docker-vm tunnel
+
+After any VPS or docker-vm reboot, verify the dedicated WireGuard tunnel:
+```bash
+ssh root@72.61.0.17 'wg show wg1' | grep "latest handshake"
+# If no handshake in >60s:
+ssh root@72.61.0.17 'wg-quick up wg1'
+```
+The tunnel uses PersistentKeepalive=25 and is systemd-enabled, but should
+be verified after a reboot.
+
 ## Rollback Protocol
 
 If ANY verification fails:
@@ -125,12 +159,12 @@ Before Wave 1, snapshot these files:
 /opt/home_stack/docker-compose.yml                      (VM 109 .7)
 /opt/audiobookshelf/docker-compose.yml                  (VM 109 .7)
 /root/.pi/agent/extensions/config.yaml                  (CT 100 .24)
-/etc/systemd/system/ornith-server.service               (amdpve .15)
+/etc/systemd/system/strix-server.service                (amdpve .15 — strix-moe)
 /etc/systemd/system/llama-server.service                (VM 101 .8, VM 103 .110)
 # Hermes agent configs (key enforcement — 2026-07-10)
-/root/.hermes/config.yaml                               (Mumuni CT 114, Tanko CT 112, etc.)
-/root/.config/systemd/user/hermes-gateway.service       (Mumuni CT 114 — EnvironmentFile fixed)
-/etc/environment                                        (Mumuni CT 114 — LITELLM_API_KEY)
+/root/.hermes/config.yaml                               (Mumuni inside CT 100, Tanko CT 112, etc.)
+/root/.config/systemd/user/hermes-gateway.service       (Mumuni inside CT 100 — EnvironmentFile fixed)
+/etc/environment                                        (Mumuni inside CT 100 — LITELLM_API_KEY)
 ```
 
 ## MCP Gateway (2026-07-10)
@@ -184,7 +218,7 @@ When LiteLLM is upgraded to a version supporting per-key MCP grants:
 
 ## Success Criteria
 
-- [ ] All 6 PVE nodes updated, no reboot-loop
+- [ ] All 5 PVE nodes updated, no reboot-loop
 - [ ] All VMs/CTs running post-update
 - [ ] All Docker containers healthy (VM 109 + CT 116 + CT 117)
 - [ ] LiteLLM inference passing (syslog-auto test)
@@ -200,7 +234,7 @@ After completion, send Zulip DM:
 ```
 📋 Infrastructure Update — YYYY-MM-DD
 
-Updated: 6 PVE nodes, 12 CTs/VMs, 30+ containers
+Updated: 5 PVE nodes, 12 CTs/VMs, 30+ containers
 Security fixes: N CVEs patched
 Downtime: <service> <duration>
 Failures: none / <details>

litellm-api-keys.prose.md

@@ -178,7 +178,7 @@ through its agent wrapper.
 | Agent | Host | Pattern | Keys | Status |
 |-------|------|---------|------|--------|
 | abiba | .24 | pi agent wrapper | ABIBA_LITELLM_API_KEY + ABIBA_ZULIP_API_KEY | ✅ vault-backed |
-| mumuni | .123 | systemd drop-in + while-true wrapper + st.8e848433 | MUMUNI_LITELLM_API_KEY + MUMUNI_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
+| mumuni | .24 (CT100 abiba) | Pi Hermes gateway (no systemd) | MUMUNI_LITELLM_API_KEY + MUMUNI_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
 | tanko | .122 | systemd drop-in + while-true wrapper + st.8e848433 (user jerome) | TANKO_LITELLM_API_KEY + TANKO_ZULIP_API_KEY | ✅ vault-backed + .env fallback |
 | koby | .129 | systemd drop-in + while-true wrapper + st.8e848433 | KOBY_LITELLM_API_KEY, shares TANKO_ZULIP_API_KEY (tanko-bot) | ✅ vault-backed |
 | koonimo | .114 | systemd drop-in + while-true wrapper + st.8e848433 | KOONIMO_LITELLM_API_KEY + KOONIMO_ZULIP_API_KEY | ✅ vault-backed |

litellm-health.prose.md

@@ -18,6 +18,15 @@ description: >
   Designed as a reusable contract for any Syslog agent.
   
   Source of truth: gpu-fleet.prose.md
+
+  ## Monitoring / Alerting (as-built 2026-08-09)
+
+  - LiteLLM /metrics scrape job: requires `litellm_settings.success_callback: [prometheus]`
+    (failure_callback alone does NOT mount /metrics — verified 2026-08-09).
+    Scraped by Prometheus with Bearer master key; endpoint returns 307 → /metrics/.
+  - Alertmanager (harness-alertmanager :9093) + zulip-bridge (:9102) deliver
+    firing alerts to #agent-hub > alerts-infra via abiba-bot. Added 2026-08-09.
+  - Prometheus node job covers ALL 5 PVE nodes (.5/.6/.9/.12/.15:9100).
 ---
 
 ## Architecture (v4.0.0 — Direct: nginx → LiteLLM → GPU)
@@ -42,7 +51,7 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 **What changed (v3.2.0 → v4.0.0 — 2026-07-08)**:
 - Router REMOVED from request path — LiteLLM proxies directly to GPU
 - All GPUs at parallel 2 (was parallel 1)
-- NVIDIA context reduced 256K→128K to free VRAM  (SUPERSEDED 2026-07-16: all GPUs back to 256K — see litellm-self-heal)
+- NVIDIA context reduced 256K→128K to free VRAM — now the stable ceiling across all GPUs (2026-07-17)
 - LiteLLM timeouts tuned: gemma 25→120s, qwen 40→90s  (SUPERSEDED 2026-07-16: qwen 300s, gemma 120s, strix 300s — see litellm-self-heal)
 - nginx proxy_read_timeout: 600s, LiteLLM request_timeout: 300s
 
@@ -72,9 +81,9 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 
 | Host | IP | Hardware | Models Served | Engine | Context | Parallel |
 |------|-----|----------|---------------|--------|---------|----------|
-| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd | **256K** | 2 |
-| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd | **256K** | 2 |
-| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: strix-moe) | llama-server systemd (Vulkan) | 256K | 2 |
+| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd | **128K** | 2 |
+| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd | **128K** | 2 |
+| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: strix-moe) | llama-server systemd (Vulkan) | 128K | 2 |
 
 ## Model Fallback Chains (LiteLLM)
 

litellm-self-heal.prose.md

@@ -7,7 +7,7 @@ note: >
   Auto-remediation code was removed from the pi Zulip extension (retired 2026-07-04),
   now reimplemented as `litellm-health-check.sh` on CT 116.
   Script: `/opt/inference-harness/scripts/litellm-health-check.sh` on CT 116 (cron `0 */6 * * *`).
-  Reports to /var/log/litellm/health-*.json and RA-H OS knowledge graph.
+  Reports to /var/log/litellm/health-*.json and Gitea (SyslogSolution/health-logs).
   GPU monitoring integrated from gpu-monitor on .24:9100.
   
   Consolidated from litellm-health + litellm-self-heal on 2026-07-09 to eliminate
@@ -20,7 +20,7 @@ description: >
   LiteLLM inference stack health monitoring + self-healing. Verifies the full
   nginx → LiteLLM → GPU chain, 8 containers on CT 116, 3 GPU hosts, model
   inference, and agent keys. Applies remediation rules for common failures.
-  Reports every action via Zulip DM and RA-H OS knowledge graph.
+  Reports every action via Zulip DM and Gitea (SyslogSolution/health-logs).
 ---
 
 # LiteLLM Operations — Health Check + Self-Heal
@@ -57,9 +57,9 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 
 | Host | IP | Hardware | Models Served | Engine | Context | Parallel |
 |------|-----|----------|---------------|--------|---------|----------|
-| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `-c 262144 --parallel 2 --ngl 99`) | **256K** | 2 |
-| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `--ctx-size 262144 --parallel 2`, IQ4_NL + MTP draft) | **256K** | 2 |
-| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: `strix-moe`) | llama-server systemd (Vulkan) | 256K | 2 |
+| llm-gpu | 192.168.68.8 | NVIDIA RTX 3090 (24 GB) | qwen3.6-27B-code | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `-c 131072 --parallel 2 --ngl 99`) | **128K** | 2 |
+| ocu-llm | 192.168.68.110 | NVIDIA RTX 5070 (12 GB) | gemma-4-12b | llama-server systemd (`/home/llmuser/llama-wrapper.sh`, `--ctx-size 131072 --parallel 2`, IQ4_NL + MTP draft) | **128K** | 2 |
+| amdpve | 192.168.68.15 | AMD Strix Halo 64GB UMA | qwen3.6-35B-udq4 (LiteLLM alias: `strix-moe`) | llama-server systemd (Vulkan) | 128K | 2 |
 
 > Verified on ground 2026-07-16 via `curl /v1/models` on each host + `llama-wrapper.sh`. The AMD host's underlying model is `qwen3.6-35B-udq4`; LiteLLM exposes it under two `model_name`s: `qwen3.6-35B-udq4` and `strix-moe` (rpm 40). The legacy name `ornith-1.0-35b` does NOT exist in LiteLLM and must not be referenced.
 
@@ -101,8 +101,8 @@ Request → nginx:80 → LiteLLM:4000 → GPU(llama-server, parallel 2)
 ## Script Operations (synced 2026-07-16)
 
 - **Health-check script** (`/opt/inference-harness/scripts/litellm-health-check.sh` on CT 116): `gpu-fleet` check fails only on **critical** alerts (warnings are informational). Tests `strix-moe` (not `ornith-1.0-35b`).
-- **GPU monitor** (`/root/scripts/gpu-monitor-server.py` on pi .24): runs as **systemd unit `gpu-monitor.service`** (was bare `&` process). `gpu_count` includes Strix Halo (was 2, now 3). VRAM alert thresholds: warning 93%, critical 97% (raised from 90/95 — 256K context steady-state is ~96% on RTX 3090, not a fault).
-- **Agent key monitor** (`/root/scripts/agent-health-check.py` on pi .24, cron `*/10`): reads each agent's **live** `LITELLM_API_KEY` from its gateway process env via SSH — never hardcodes keys (hardcoded keys rot on rotation and caused 9×401/30min). Fleet roster: abiba, tanko, mumuni, koby, koonimo (legacy `tdunna`/`baggy` removed — never existed).
+- **GPU monitor** (`/root/scripts/gpu-monitor-server.py` on pi .24): runs as **systemd unit `gpu-monitor.service`** (was bare `&` process). `gpu_count` includes Strix Halo (was 2, now 3). VRAM alert thresholds: warning 93%, critical 97% (raised from 90/95 — 128K context steady-state is ~70% on RTX 3090, not a fault).
+- **Agent key monitor** (`/root/scripts/agent-health-check.py` on pi .24, cron `*/10`): v2 (2026-07-26) — reads each agent's **agent-specific** `{NAME}_LITELLM_API_KEY` from Infisical vault (not the shared master key). Covers: LiteLLM keys, GPU ports, agent gateways (all 5 agents now SSHa ble), CT liveness (pct status on PVE nodes), config.yaml YAML integrity, wrapper/CLI integrity, vault secret non-emptiness checks. Fleet roster: tanko (.122), mumuni (.24, inside abiba CT100), koby (.129), koonimo (.114), abiba (.24). Legacy `tdunna`/`baggy` replaced with canonical agent hostnames.
 - **Stale keys cleaned**: `daily-infra-report.py` SYNTHETIC_API_KEY was stale (`sk-U_ydi3B` → 401); now reads `LITELLM_MASTER_KEY` from env. Deprecated scripts (`router-original.py`, `router-phase0-backup.py`, `apply-fixes.py`) still reference `sk-syslog-local-master-key` but do not actively poll LiteLLM.
 
 ## Maintains
@@ -211,8 +211,8 @@ for reference but inactive. If Redis issues occur, check harness-redis container
 
 Every remediation cycle produces a structured report:
 
-### 1. RA-H OS Knowledge Graph Node
-Created as `[LEARN] litellm-self-heal: <run_id>` with full JSON report.
+### 1. Gitea Log Entry
+Pushed to `SyslogSolution/health-logs/litellm/{run_id}.json` — versioned, searchable, not in graph.
 
 ### 2. Zulip DM to Owner
 - `issues_fixed > 0` — "🛠 LiteLLM Self-Heal — Fix Applied"
@@ -252,9 +252,11 @@ call report-generator
   health: health
   actions: actions
 
--- Phase 4: Log to knowledge graph
-call kg-logger
+-- Phase 4: Log to Gitea (not knowledge graph — hard rule)
+call gitea-logger
   run_id: run_id
+  repo: SyslogSolution/health-logs
+  path: litellm/{run_id}.json
   health: health
   actions: actions
 
@@ -300,3 +302,20 @@ With failures:
   ]
 }
 ```
+
+## gitea-logger Implementation
+
+When this step executes, write the report JSON to a temp file and push to Gitea:
+
+```bash
+REPO="https://abiba-bot:${GITEA_PAT}@git.sysloggh.net/SyslogSolution/health-logs"
+DIR="litellm"
+FILE="${run_id}.json"
+echo "${report_json}" > /tmp/${FILE}
+(cd /tmp && git clone --depth 1 "${REPO}" && 
+  cp ${FILE} health-logs/${DIR}/${FILE} && 
+  cd health-logs && git add ${DIR}/${FILE} && 
+  git commit -m "litellm-health: ${run_id}" && git push)
+rm -rf /tmp/health-logs /tmp/${FILE}
+```
+

memory-audit-maintenance.prose.md

@@ -1,7 +1,7 @@
 ---
 name: memory-audit-maintenance
 kind: responsibility
-description: Shared memory audit and maintenance contract for all Hermes agents (Mumuni, Tanko, Koby, Koonimo). Each agent runs it against its own isolated memory files — no cross-agent access, no shared state. Detects staleness, enforces writer registry, and rotates canary tokens.
+description: Shared memory audit and maintenance contract for Hermes agents (Mumuni, Koby, Koonimo). Tanko is no longer a Hermes agent (now on DSH/DeepSeek Harness since 2026-08-27) and uses DSH-native memory, so it is excluded from this Hermes roster. Each agent runs it against its own isolated memory files — no cross-agent access, no shared state. Detects staleness, enforces writer registry, and rotates canary tokens.
 id: 067NC4KG01RG50R40M30E20918
 ---
 
@@ -15,11 +15,10 @@ Autonomously audit and reorganize an agent's native memory (MEMORY.md, USER.md,
 
 ### Scope
 
-This contract is the **Hermes Agent standard** for memory maintenance. It is shared across all Hermes agents (Mumuni, Tanko, Koby, Koonimo). Each agent runs it against its own memory files only  no cross-agent access, no shared state, no shared ledger, no shared canary. The contract is the standard; each agent enforces it independently with fully isolated data.
+This contract is the **Hermes Agent standard** for memory maintenance. It is shared across Hermes agents (Mumuni, Koby, Koonimo). **Tanko is excluded — it migrated to DSH (DeepSeek Harness) on 2026-08-27 and now uses DSH-native memory (mnemon), not `~/.hermes/memories/`.** Each agent runs it against its own memory files only  no cross-agent access, no shared state, no shared ledger, no shared canary. The contract is the standard; each agent enforces it independently with fully isolated data.
 
-**Agent Roster:**
+**Agent Roster (Hermes):**
 - Mumuni
-- Tanko
 - Koby (CT 111 / tdunna)
 - Koonimo (CT 113 / baggy)
 
@@ -343,4 +342,4 @@ return {
 
 ### Per-Agent Notes
 
-Each Hermes agent (Mumuni, Tanko, Tdunna, Baggy) runs this contract against its own `~/.hermes/memories/` directory. The contract is identical across agents, but all data is fully isolated: separate ledgers, separate writer registries, separate canaries. If a new agent is added to the roster, it must be listed in `### Scope` above and given its own isolated memory directory.
+Each Hermes agent (Mumuni, Tdunna/Koby, Baggy/Koonimo) runs this contract against its own `~/.hermes/memories/` directory. The contract is identical across agents, but all data is fully isolated: separate ledgers, separate writer registries, separate canaries. If a new agent is added to the roster, it must be listed in `### Scope` above and given its own isolated memory directory. **Tanko is not covered by this contract — it runs on DSH (DeepSeek Harness) since 2026-08-27 and uses DSH-native memory.**

memory-fixer.prose.md

@@ -0,0 +1,177 @@
+---
+kind: pattern
+name: memory-fixer
+description: >
+  Auto-fix low-hanging fruit in the RA-H OS knowledge graph. No judgment calls — only deterministic Level 1 operations.
+  Escalate anything that needs Kwame's input. Executes confirmed Kwame decisions to completion (state + updated_at).
+version: 2.0.0
+---
+
+# Memory Fixer
+
+> **Canonical copy:** `/root/.hermes/contracts/memory-fixer-v3.md` (used by the `memory-fixer-daily` cron job). This file is the institutional record of the same contract. When the two diverge, treat the v3 source in `/root/.hermes/contracts/` as executable truth.
+
+## Purpose
+Auto-fix low-hanging fruit in the graph. No judgment calls — only deterministic Level 1 operations. Escalate anything that needs Kwame's input. When Kwame replies to an escalation, **execute the decision to completion** (update state and timestamps), never leaving a node in review-pending forever.
+
+**Type:** Write-only (Level 1 fixes only)
+**Scope:** RA-H OS knowledge graph (192.168.68.65)
+**Schedule:** Daily at 8 AM ET
+**Escalation:** Level 2+ to Kwame as task items
+
+## Key Design Decision
+
+The `updateNode` tool's `metadata` field performs a **restricted merge** — the `state` key only accepts `'processed'` or `'not_processed'`. Additionally, new metadata keys cannot be added via the merge.
+
+**Solution:** Use the `description` field to tag stale nodes with review actions, since `description` is a simple string overwritable via `updateNode`.
+
+**Tag Format:** `[REVIEW: action] original description text...`
+
+Where `action` is one of:
+- `archive` — node is stale and should be archived
+- `refresh` — node is stale and should be refreshed (infrastructure)
+- `keep` — node has been confirmed as current
+- `merge` — node is a duplicate candidate
+
+**Query for finding review-tagged nodes:**
+```sql
+SELECT id, title, description
+FROM nodes
+WHERE description LIKE '[REVIEW:%';
+```
+
+## Level 1 Auto-Fixes (No Kwame Decision Needed)
+
+### 1. Missing `type` Auto-Classification
+
+```sql
+SELECT id, title,
+  CASE
+    WHEN title LIKE '%infrastructure%' OR title LIKE '%proxmox%' OR title LIKE '%setup%' THEN 'infrastructure'
+    WHEN title LIKE '%skill%' OR title LIKE '%how to%' OR title LIKE '%guide%' THEN 'skill'
+    WHEN title LIKE '%doc%' OR title LIKE '%template%' OR title LIKE '%brand%' THEN 'documentation'
+    WHEN title LIKE 'WAL:%' OR title LIKE 'TASK:%' THEN 'note'
+    WHEN title LIKE '%[LEARN]%' THEN 'documentation'
+    ELSE 'note'
+  END as auto_type
+FROM nodes
+WHERE json_extract(metadata, '$.type') IS NULL;
+```
+
+### 2. Missing `namespace` Auto-Population
+
+```sql
+SELECT id, title, json_extract(metadata, '$.tenant') as tenant
+FROM nodes
+WHERE json_extract(metadata, '$.namespace') IS NULL;
+```
+
+### 3. Staleness Review Tagging
+
+Using the type-based windows from the memory-monitor contract, tag nodes stale beyond their window. **Only process a maximum of 10 nodes per run** to avoid overwhelming Kwame. Prioritize infrastructure first, then dynamic, then ephemeral.
+
+**Exclusion Rules:**
+- Nodes with `state` = `review_pending`, `deprecated`, `archived`, or `not_processed` are NOT processed
+- Nodes whose `description` already starts with `[REVIEW:` are NOT re-processed
+
+```sql
+SELECT id, title, json_extract(metadata, '$.type') as node_type,
+  CAST(julianday('now') - julianday(updated_at) AS INTEGER) as days_stale,
+  CASE
+    WHEN json_extract(metadata, '$.type') IN ('infrastructure', 'deployment', 'system', 'system-health') THEN 'refresh'
+    WHEN json_extract(metadata, '$.type') IN ('business', 'philosophy', 'research', 'learning', 'learn', 'investigation', 'analysis', 'project') THEN 'refresh'
+    ELSE 'archive'
+  END as suggested_action
+FROM nodes
+WHERE updated_at < datetime('now',
+  CASE
+    WHEN json_extract(metadata, '$.type') IN ('infrastructure', 'deployment', 'system', 'system-health') THEN '-14 days'
+    WHEN json_extract(metadata, '$.type') IN ('skill', 'documentation', 'template', 'protocol-enforcement', 'prd', 'architecture') THEN '-90 days'
+    WHEN json_extract(metadata, '$.type') IN ('note', 'wal', 'WAL', 'task', 'TASK', 'event') THEN '-30 days'
+    WHEN json_extract(metadata, '$.type') IN ('business', 'philosophy', 'research', 'learning', 'learn', 'investigation', 'analysis', 'project') THEN '-120 days'
+    WHEN json_extract(metadata, '$.type') IN ('deprecated-relay', 'audit', 'audit-report', 'incident', 'incident-report') THEN '-3650 days'
+    ELSE '-45 days'
+  END
+)
+AND json_extract(metadata, '$.state') NOT IN ('review_pending', 'deprecated', 'archived', 'not_processed')
+AND (description IS NULL OR description NOT LIKE '[REVIEW:%')
+ORDER BY days_stale ASC
+LIMIT 10;
+```
+
+For each identified node, call `updateNode(id, { description: "[REVIEW: action] " + originalDescription })`.
+
+## Level 2 Escalations (Kwame Decision Required)
+
+1. **Stale nodes** flagged with `[REVIEW: …]` — Archive, refresh, or keep?
+2. **Duplicate Nodes** (same title or >70% title overlap) — Merge or keep?
+3. **Orphan Nodes >90 days old** — Archive or connect?
+
+## Reporting Format
+
+The fixer reports to Kwame via this Zulip DM:
+
+```
+🦅 Memory Fixer — [HH:MM UTC]
+
+Level 1 fixes applied:
+- Missing type: X nodes classified
+- Missing namespace: Y nodes populated
+
+Stale nodes needing review (max 10):
+1. [Node #XXX] Title — X days stale, SUGGEST: refresh
+2. [Node #YYY] Title — Y days stale, SUGGEST: archive
+...
+
+Duplicates needing decision:
+1. [Node #AAA] vs [Node #BBB] — Same title
+
+Orphans >90 days:
+1. [Node #EEE] Title — X days stale, orphaned
+
+Reply with:
+- "archive #XXX, #YYY" to mark for archive
+- "archive all" to archive all stale nodes listed
+- "keep #XXX" to confirm a node is current
+- "merge #AAA into #BBB" to merge duplicates
+- "refresh #XXX" to mark as current
+```
+
+## Execution on Next Run
+
+The fixer reads Kwame's previous response and **executes the decision to completion** — it must not leave a node in review-pending forever. Tagging alone is NOT enough; each confirmed decision must also update `state` and `updated_at` so the node drops out of the stale window on the next run.
+
+> ⚠️ `updateNode` cannot set `state` to non-standard values (restricted to `processed`/`not_processed`) and cannot add metadata keys. For state transitions and `updated_at` bumps, use **direct SSH + SQLite** on the bridge host:
+> ```bash
+> ssh root@192.168.68.65 "sqlite3 /root/.local/share/RA-H/db/rah.sqlite \"UPDATE nodes SET metadata = json_set(metadata, '$.state', '<state>'), updated_at = datetime('now') WHERE id = <id>;\""
+> ```
+> Use `updateNode` only for description/source/title/link edits.
+
+Decision → completed action mapping:
+
+| Kwame reply | Description change | State | `updated_at` |
+|---|---|---|---|
+| `archive #XXX` | replace `[REVIEW: archive] ` → `[ARCHIVED] ` prefix | `archived` | bumped to now |
+| `keep #XXX` / `refresh #XXX` | **clear the `[REVIEW: …]` tag entirely** | `active` | bumped to now |
+| `merge #AAA into #BBB` | set `[REVIEW: merge_into #BBB]` on #AAA, then follow manual merge workflow | handled manually | bumped to now |
+| `archive all` | apply the archive row to every node listed in the prior report | `archived` | bumped to now |
+
+**Why `updated_at` must be bumped (critical):** the Level-1 staleness query keys off `updated_at < now - window`. If the fixer clears the tag but leaves a stale `updated_at`, the node is immediately re-flagged on the very next run and the cycle repeats forever. Bumping `updated_at` to now pushes the node back to the front of the window.
+
+**Exclusion after action:** once an action is applied, the node's description no longer starts with `[REVIEW:` (archive → `[ARCHIVED]`, refresh/keep → original text), so it is not re-processed.
+
+After all actions are applied, verify with:
+```sql
+SELECT id, json_extract(metadata, '$.state') FROM nodes WHERE description LIKE '[REVIEW:%';
+```
+The result must be 0 rows when all decisions are executed. Report what was done.
+
+## Checks
+
+- **State integrity:** archived nodes have `state: archived` + `[ARCHIVED]` prefix; kept nodes are `state: active` without a `[REVIEW:]` tag.
+- **No review-pending forever:** after executing Kwame's decisions, `[REVIEW:%` node count must be 0.
+- **Timestamps:** every executed decision bumps `updated_at`, so the node exits the stale window on the next run.
+
+## Logging
+Every Level 1 fix logged to `~/.hermes/logs/memory-fixer/YYYY-MM-DD.md`
+Every Level 2 escalation logged and delivered to Kwame.

mumuni-delegation-prose-contract.prose.md

@@ -6,7 +6,7 @@ description: >
   delegation, verification, and delivery. Defines when to delegate, which
   worker to use for what, how to handle failures, and the kanban board
   protocol. Enforces context-window discipline and separation of concerns.
-  Runs on Mumuni (lxc/114, hwepve, .123) via Hermes agent.
+  Runs on Mumuni (inside Abiba CT100, minipve, .24) via Hermes agent (Pi + Hermes Zulip gateway).
 version: 1.0.0
 ---
 
@@ -19,8 +19,8 @@ version: 1.0.0
 
 ## Topology
 
-**Cluster:** 6 Proxmox nodes (ocupve, acerpve, minipve, amdpve, storepve, hwepve)
-**Manager:** Mumuni (lxc/114, hwepve, .123) via Hermes agent
+**Cluster:** 5 Proxmox nodes (ocupve, acerpve, minipve, amdpve, storepve)
+**Manager:** Mumuni (inside Abiba CT100, minipve, .24) via Hermes agent
 **Workers:** 6 profiles, all running on the same agent — no separate hosts needed
 
 This contract is infrastructure-agnostic in terms of which nodes are used.
@@ -31,7 +31,7 @@ Workers execute tasks on whatever infrastructure they're given — SSH to .6,
 ## Why This Matters
 
 Without enforced delegation, the manager consumes the full iteration budget
-(60 calls) on single-turn tasks — SSH to 6 nodes, check each VM, read logs —
+(60 calls) on single-turn tasks — SSH to 5 nodes, check each VM, read logs —
 leaving no capacity for actual coordination. The result: context overflow
 (59K tokens in system prompt), iteration exhaustion, and degraded response
 quality. This contract exists because I blew through my budget checking
@@ -82,7 +82,7 @@ it asks the manager (via relay) — it doesn't go find it on its own.
 
 **This is a hard rule, not a recommendation.** Violating it produces the exact
 type of discrepancy the kanban pipeline exists to prevent: a review worker finds
-"6 nodes present" in the raw data but "5/6 online" in the report — even though
+"5 nodes present" in the raw data but "5/5 online" in the report — even though
 one of those nodes was unreachable. The report lied because it used data the
 raw data never provided.
 
@@ -137,7 +137,7 @@ delegate_task(
 ```
 delegate_task(
     tasks=[
-        {"goal": "Check all 6 Proxmox nodes for VM status", "context": "SSH to each node via 192.168.68.x, run 'qm list'"},
+        {"goal": "Check all 5 Proxmox nodes for VM status", "context": "SSH to each node via 192.168.68.x, run 'qm list'"},
         {"goal": "Check Docker container health on .7/.116/.17", "context": "SSH to each host, check container status"},
     ]
 )
@@ -191,7 +191,7 @@ Only verified results reach Kwame. Format per channel:
     {
       "lane_id": "devops-check",
       "worker": "syslog-devops",
-      "goal": "Check all 6 Proxmox nodes",
+      "goal": "Check all 5 Proxmox nodes",
       "status": "dispatched|completed|failed",
       "output_file": "/tmp/node-report.md"
     }

pi-approval-architecture.prose.md

@@ -54,7 +54,7 @@ garbled input. When a user types these commands to Abiba:
 
 - **`/approve`** → "Pi doesn't have pending approvals. Commands execute immediately."
 - **`/approve session`** → Same response
-- **`/deny`** → Same response + "For Hermes agents (Tanko, Mumuni), these work with their built-in approval system."
+- **`/deny`** → Same response + "For agents (Mumuni on Hermes, Tanko on DSH), these work with their built-in approval system."
 
 This keeps the UX consistent across agents — users can type `/approve` anywhere
 without getting confused by LLM responses.

pm2-self-heal.prose.md

@@ -2,21 +2,31 @@
 kind: responsibility
 name: pm2-self-heal
 description: >
-  Monitors critical PM2 processes (abiba-zulip, abiba-telegram) and
-  auto-restarts any that are stopped or errored. Logs every action to
-  the knowledge graph and alerts the owner via Zulip DM on failures.
+  Monitors critical PM2 processes (abiba-zulip, abiba-telegram, gitea-runner,
+  spoton-service, zulip-watchdog) and auto-restarts any that are stopped or
+  errored. Logs every action to Gitea (SyslogSolution/health-logs — not
+  knowledge graph, hard rule) and alerts the owner via
+  Zulip DM on failures.
   CRITICAL: Never restart abiba-zulip — it runs this contract.
+  AS-BUILT 2026-08-09 (captain ruling, ecosystem is authoritative):
+  gpu-monitor is systemd-managed (gpu-monitor.service) — NOT PM2;
+  gpu-watchdog decommissioned (function folded into gpu-monitor.service);
+  gitea-runner KEPT (online in PM2); abiba-zulip KEPT (online 4d+, the
+  2026-07-04 'removed/decommissioned' note was stale and is removed).
 ---
 
 ## Maintains
 
 - abiba-telegram: { status: "online", uptime: string, restarts: number }
-- gpu-watchdog: { status: "online", uptime: string, restarts: number }
-- gpu-monitor: { status: "online", uptime: string, restarts: number }
+- abiba-zulip: { status: "online", uptime: string, restarts: number }
 - gitea-runner: { status: "online", uptime: string, restarts: number }
+- spoton-service: { status: "online", uptime: string, restarts: number }
+- zulip-watchdog: { status: "online", uptime: string, restarts: number }
 - last_check: timestamp
 
-> **Note (2026-07-04):** `abiba-zulip` removed — Zulip extension decommissioned.
+> **Note (2026-07-04, SUPERSEDED 2026-08-09):** `abiba-zulip` remains ONLINE and
+> is monitored — the decommission note was stale (process re-added; do not treat
+> it as removed).
 
 ## Continuity
 
@@ -31,10 +41,15 @@ description: >
 - **Verify**: Re-check status after 5 seconds
 - **Escalate**: If still failed after 2 retries, send Zulip DM to owner
 
-### Rule 2: Process Restarting Too Often
-- **Detect**: `pm2 status` shows restarts > 30 (cumulative lifetime counter)
+### Rule 2: Process Restarting Too Often (crash-loop guard)
+- **Detect**: `pm2 status` shows restarts > 30 (cumulative lifetime counter) **or** a
+  process reporting a restart count > 1000 while showing "online" (a crash-loop mask)
 - **Note**: PM2 counter never decrements; only full delete+re-add resets it
 - **Fix**: `pm2 delete <name> && pm2 start <ecosystem> --only <name>`
+- **Script guard (2026-08-16)**: `scripts/pm2-self-heal.sh` now restarts `abiba-telegram`
+  when `TEL_RESTARTS > 1000` even if the process reports "online" — catches a quiet
+  crash-loop that never toggles status to "stopped"/"errored" (e.g. the 10k-restarts
+  spoton incident). Alerts include the restart count.
 - **Escalate**: Only when restarts > 30 — alerts to Zulip DM
 - **Historical fix**: Previous cycles were caused by abiba-zulip extension's
   stuck detection (STUCK_THRESHOLD_MS was 30min, raised to 4h in v2).
@@ -52,7 +67,7 @@ description: >
    - If status is "online" → pass, log restarts count
    - If status is "stopped" or "errored" → **DO NOT RESTART** — alert owner immediately
    - If restarts > 5 in last hour → alert owner with full diagnostics
-4. **Log results** — Create `[LEARN]` node in knowledge graph for any actions taken
+4. **Log results** — Append to `SyslogSolution/health-logs/pm2/{timestamp}.md` in Gitea (not knowledge graph — hard rule)
 5. **Alert** — Send Zulip DM to owner if escalation needed (do NOT run pm2 commands during alerting)
 6. **Wait 5 min** → repeat from step 1
 

proxmox-monitor.prose.md

@@ -5,7 +5,7 @@ description: >
   Proxmox cluster + Docker monitoring via the existing Grafana/Prometheus stack
   on CT 116. Replaces Pulse with file-provisioned Grafana dashboards. Three
   exporters feed Prometheus: prometheus-pve-exporter (cluster-aware, single
-  instance), node_exporter (all 6 PVE nodes), and a custom docker-stats-exporter
+  instance), node_exporter (all 5 PVE nodes), and a custom docker-stats-exporter
   (Docker 29 / containerd image-store compatible, since cAdvisor cannot resolve
   the layerdb). Dashboards exposed at http://192.168.68.116:3001/ (direct LAN, not behind nginx).
 agent: abiba
@@ -20,7 +20,7 @@ agent: abiba
 └───────┬──────────────┬──────────────┬───────────────────────┘
         │              │              │
         ▼              ▼              ▼
-   pve-exporter    docker-stats    (scrapes 6x node_exporter)
+   pve-exporter    docker-stats    (scrapes 5x node_exporter)
    :9221           :9324
         │              │
         ▼              ▼
@@ -33,8 +33,8 @@ agent: abiba
 
 | Exporter | Host:Port | Scope | Notes |
 |----------|-----------|-------|-------|
-| prometheus-pve-exporter | .116:9221 (container) | All 6 nodes + guests + 36 storage pools | Single instance, cluster-aware via amdpve API. Config `/opt/monitoring/pve.yml` (token `monitoring@pve!prometheus`, PVEAuditor role). Metric schema is label-based (`id=node/amdpve`, `id=lxc/100`). |
-| node_exporter | .5/.6/.9/.12/.15/.4:9100 (systemd) | Per-node CPU/mem/disk/net/temp | Installed via apt on all 6 PVE nodes, enabled (reboot-persistent). Collectors: textfile, systemd, tcpstat, ethtool. hwepve (.4) added 2026-07-19. |
+| prometheus-pve-exporter | .116:9221 (container) | All 5 nodes + 14 guests + 36 storage pools | Single instance, cluster-aware via amdpve API. Config `/opt/monitoring/pve.yml` (token `monitoring@pve!prometheus`, PVEAuditor role). Metric schema is label-based (`id=node/amdpve`, `id=lxc/100`). |
+| node_exporter | .5/.6/.9/.12/.15:9100 (systemd) | Per-node CPU/mem/disk/net/temp | Installed via apt on all 5 PVE nodes, enabled (reboot-persistent). Collectors: textfile, systemd, tcpstat, ethtool. |
 | docker-stats-exporter | .116:9324 (container) | 10 Docker containers on .116 | **Custom** (cAdvisor v0.51 incompatible with Docker 29 containerd image store — layerdb gone). Uses Docker Engine API over unix socket. Script `/opt/monitoring/docker-stats-exporter.py`. |
 
 ## PVE API Token
@@ -48,7 +48,7 @@ agent: abiba
 
 | UID | Title | Panels | Source |
 |-----|-------|--------|--------|
-| proxmox-cluster | Proxmox Cluster Overview | 16 | cluster status, 6-node CPU/mem/disk/load gauges, guests table, storage pools, guest CPU/mem timeseries |
+| proxmox-cluster | Proxmox Cluster Overview | 16 | cluster status, 5-node CPU/mem/disk/load gauges, guests table, storage pools, guest CPU/mem timeseries |
 | proxmox-node | Proxmox Node Detail | 13 | per-node CPU per-core, memory, network, disk IO/IOPS/latency, temperature, disk space (variable: $node) |
 | docker-containers | Docker Containers | 10 | per-container CPU/mem/network, restarts, memory limit ratio (variable: $container) |
 | gpu-fleet | GPU Fleet | 7 | (existing, preserved in DB, not provisioned) |
@@ -71,15 +71,15 @@ agent: abiba
 | File | Host | Purpose |
 |------|------|---------|
 | `/opt/monitoring/docker-compose.yml` | .116 | monitoring stack (prometheus, grafana, pve-exporter, docker-stats) |
-| `/opt/monitoring/prometheus.yml` | .116 | 6 scrape jobs (3 GPU, pve, node x6, docker-stats) |
+| `/opt/monitoring/prometheus.yml` | .116 | 6 scrape jobs (3 GPU, pve, node x5, docker-stats) |
 | `/opt/monitoring/pve.yml` | .116 | PVE API credentials (chmod 644, contains token) |
 | `/opt/monitoring/docker-stats-exporter.py` | .116 | custom Docker metrics exporter |
 | `/opt/monitoring/grafana/dashboards/build-dashboards.py` | .116 | dashboard JSON generator |
 | `/opt/monitoring/grafana/dashboards/json/*.json` | .116 | provisioned dashboard definitions |
 | `/opt/monitoring/grafana/datasources/prometheus.yml` | .116 | datasource provisioning |
-| `/etc/default/prometheus-node-exporter` | .5/.6/.9/.12/.15/.4 | node_exporter collector config |
+| `/etc/default/prometheus-node-exporter` | .5/.6/.9/.12/.15 | node_exporter collector config |
 
-## Cluster "Tabiri" — 6 Nodes
+## Cluster "Tabiri" — 5 Nodes
 
 | Node | IP | Role |
 |------|----|----|
@@ -87,8 +87,7 @@ agent: abiba
 | storepve | 192.168.68.6 | PVE |
 | acerpve | 192.168.68.9 | PVE (hosts llm-gpu qemu/101) |
 | minipve | 192.168.68.12 | PVE |
-| amdpve | 192.168.68.15 | PVE + Strix Halo LLM (ornith) |
-| hwepve | 192.168.68.4 | PVE (Huawei Matebook 16, 12C/15GB) — hosts Mumuni (lxc/114) migrated from minipve 2026-07-20 |
+| amdpve | 192.168.68.15 | PVE + Strix Halo LLM (qwen3.6-35B-udq4, strix-moe) |
 
 ## Operations
 

scripts/agent-health-check.py

@@ -1,10 +1,10 @@
 #!/usr/bin/env python3
 """
-/root/scripts/agent-health-check.py — Consolidated Agent Health Verification
+/root/scripts/agent-health-check.py — Consolidated Agent Health Verification v2
 
-Single non-disruptive health check replacing 7 scattered scripts.
-Verifies: LiteLLM keys, GPU port conflicts, agent Zulip streaming,
-gateway liveness, and gateway log health. NEVER restarts anything.
+Verifies: LiteLLM keys (agent-specific), GPU port conflicts, agent Zulip streaming,
+gateway liveness, gateway log health, CT liveness, config YAML integrity,
+wrapper/CLI integrity, vault secret non-emptiness. NEVER restarts anything.
 
 Usage:
   python3 /root/scripts/agent-health-check.py          # Full check
@@ -12,68 +12,62 @@ Usage:
   python3 /root/scripts/agent-health-check.py --quiet  # Only output on failure
 
 Cron: */10 * * * * python3 /root/scripts/agent-health-check.py --quiet
+
+Changelog:
+  v2 (2026-07-26): Added CT liveness, config validation, wrapper integrity,
+    vault secret emptiness check. Fixed Koby/Koonimo SSH hosts and agent key
+    name format ({NAME}_LITELLM_API_KEY not LITELLM_API_KEY_{NAME}).
+    Fleet roster: tanko (.122), mumuni (.24, inside abiba CT100), koby (.129), koonimo (.114),
+    abiba (.24).
 """
 
 import subprocess, json, sys, os, time
 from datetime import datetime
 
 LITELLM = "http://192.168.68.116:80"
+INFISICAL_PROJECT = "322fceab-39da-4854-a55a-568e76c0f13f"
+INFISICAL_ENV = "prod"
 
-def _get_agent_key(agent_name):
-    """Retrieve agent key from Infisical vault."""
-    try:
-        result = subprocess.run(
-            ["infisical", "secrets", "get", "LITELLM_API_KEY",
-             "--project=agents", "--env=production", "--plain"],
-            capture_output=True, text=True, timeout=10
-        )
-        if result.returncode == 0:
-            return result.stdout.strip()
-    except Exception:
-        pass
-
-    # Fallback: try exporting all secrets
-    try:
-        result = subprocess.run(
-            ["infisical", "export", "--project=agents", "--env=production",
-             "--format=dotenv"],
-            capture_output=True, text=True, timeout=10
-        )
-        if result.returncode == 0:
-            for line in result.stdout.splitlines():
-                if line.startswith(f"LITELLM_API_KEY_{agent_name.upper()}") or \
-                   (line.startswith("LITELLM_API_KEY=") and agent_name == os.uname().nodename):
-                    return line.split("=", 1)[1].strip().strip('"').strip("'")
-    except Exception:
-        pass
-
-    return None
-
-# Agent keys are pulled from Infisical vault at runtime.
-# The 'key' field is populated dynamically below.
-AGENTS = {
-    "tanko":   {"ct": 112, "host": "192.168.68.122", "user": "jerome"},
-    "mumuni":  {"ct": 114, "host": "192.168.68.123", "user": "root"},
-    "koby":    {"ct": 111, "host": None,              "user": None},
-    "koonimo": {"ct": 113, "host": None,              "user": None},
+# PVE node IPs for CT liveness checks
+PVE_NODES = {
+    "amdpve":  "192.168.68.15",
+    "minipve": "192.168.68.12",
+    "storepve": "192.168.68.6",
+    "acerpve": "192.168.68.9",
+    "ocupve":  "192.168.68.5",
 }
 
-# Inject keys from vault
-for agent_name in AGENTS:
-    key = _get_agent_key(agent_name)
-    if key:
-        AGENTS[agent_name]["key"] = key
-    else:
-        AGENTS[agent_name]["key"] = None
+# Agent definitions: ct, host, user, pve_node, vault_key_name
+AGENTS = {
+    "tanko":   {"ct": 112, "host": "192.168.68.122", "user": "jerome", "pve": "amdpve",  "vault_key": "TANKO_LITELLM_API_KEY", "runtime": "dsh"},
+    "abiba":   {"ct": 100, "host": "192.168.68.24",  "user": "root",   "pve": "minipve",  "vault_key": None},  # Pi agent + Mumuni Zulip, no vault key
+    "koby":    {"ct": 111, "host": "192.168.68.129", "user": "root",   "pve": "amdpve",  "vault_key": "KOBY_LITELLM_API_KEY"},
+    "koonimo": {"ct": 113, "host": "192.168.68.114", "user": "root",   "pve": "amdpve",  "vault_key": "KOONIMO_LITELLM_API_KEY"},
+}
 
 GPU_HOSTS = {
     "gpu-rtx3090 (.8)":     {"host": "192.168.68.8",   "port": 8080, "service": "llama-server"},
     "gpu-rtx5070 (.110)":   {"host": "192.168.68.110", "port": 8080, "service": "llama-server"},
-    "gpu-strixhalo (.15)":  {"host": "192.168.68.15",  "port": 8080, "service": "ornith-server"},
+    "gpu-strixhalo (.15)":  {"host": "192.168.68.15",  "port": 8080, "service": "strix-server"},
 }
 
 FAIL = []
 
+INFISICAL_TOKEN = os.environ.get("INFISICAL_TOKEN")
+INFISICAL_API_URL = os.environ.get("INFISICAL_API_URL", "https://vault.sysloggh.net")
+
+# Fallback: if no env token, read the shared vault token file
+if not INFISICAL_TOKEN:
+    _token_path = os.path.expanduser("~/.infisical-token")
+    if os.path.isfile(_token_path):
+        try:
+            with open(_token_path) as _f:
+                INFISICAL_TOKEN = _f.read().strip()
+        except (OSError, UnicodeDecodeError):
+            pass
+
+# ── Helpers ──────────────────────────────────────────────────────────
+
 def ssh(host, cmd, user="root"):
     """Execute a command on a remote host, return stdout or None."""
     try:
@@ -112,15 +106,81 @@ def http_json(url, headers=None, timeout=5):
     except:
         return None
 
+def run_infisical(args, quiet=True):
+    """Run infisical CLI with env-based auth, return stdout or None."""
+    env = os.environ.copy()
+    env["INFISICAL_API_URL"] = INFISICAL_API_URL
+    if INFISICAL_TOKEN:
+        env["INFISICAL_TOKEN"] = INFISICAL_TOKEN
+    try:
+        result = subprocess.run(
+            ["/usr/bin/infisical"] + args,
+            capture_output=True, text=True, timeout=15, env=env
+        )
+        return result.stdout.strip() if result.returncode == 0 else None
+    except:
+        return None
+
+# ── KEY LOOKUP FIX ───────────────────────────────────────────────────
+
+def _get_agent_key(agent_name, vault_key_name):
+    """Retrieve agent-specific key from Infisical vault.
+    
+    Uses {NAME}_LITELLM_API_KEY format (e.g., TANKO_LITELLM_API_KEY,
+    KOONIMO_LITELLM_API_KEY) which matches actual vault key names.
+    """
+    if not vault_key_name:
+        return None
+
+    # Primary: get the agent-specific key by name
+    key = run_infisical([
+        "secrets", "get", vault_key_name,
+        "--projectId=" + INFISICAL_PROJECT,
+        "--env=" + INFISICAL_ENV,
+        "--plain",
+    ])
+    if key and key.startswith("sk-"):
+        return key
+
+    # Fallback: export all and search for the key name
+    try:
+        export = run_infisical([
+            "export",
+            "--projectId=" + INFISICAL_PROJECT,
+            "--env=" + INFISICAL_ENV,
+            "--format=dotenv",
+        ])
+        if export:
+            for line in export.splitlines():
+                if line.startswith(vault_key_name + "="):
+                    value = line.split("=", 1)[1].strip().strip('"').strip("'")
+                    if value.startswith("sk-"):
+                        return value
+    except:
+        pass
+
+    return None
+
+# Inject keys from vault for each agent
+for agent_name in AGENTS:
+    info = AGENTS[agent_name]
+    key = _get_agent_key(agent_name, info.get("vault_key"))
+    AGENTS[agent_name]["key"] = key
+
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 1: LiteLLM Key Validation
+# CHECK 1: LiteLLM Key Validation (agent-specific keys)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_keys():
     for name, agent in AGENTS.items():
+        key = agent.get("key")
+        if not key:
+            print(f"  ❌ {name}: NO KEY FOUND (vault empty or unreachable)")
+            FAIL.append(f"key:{name}:no-key")
+            continue
         data = http_json(f"{LITELLM}/v1/models",
-                         headers={"Authorization": f"Bearer {agent['key']}"})
+                         headers={"Authorization": f"Bearer {key}"})
         if data and data.get("data"):
             model = data["data"][0].get("id", "?")
             print(f"  ✅ {name}: key valid → {model}")
@@ -130,7 +190,7 @@ def check_keys():
 
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 2: GPU Port Conflict Detection
+# CHECK 2: GPU Port Conflict Detection (unchanged)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_gpu_ports():
@@ -158,7 +218,6 @@ def check_gpu_ports():
             else:
                 print(f"  ⚠️  {label}: svc={svc_status}, port owned by {port_owner}")
         else:
-            # Verify health endpoint
             health = ssh(host, f"curl -s --max-time 5 http://localhost:{port}/health")
             if health and '"status":"ok"' in health:
                 print(f"  ✅ {label}: healthy (pid={port_owner})")
@@ -171,7 +230,7 @@ def check_gpu_ports():
 
 
 # ═══════════════════════════════════════════════════════════════════
-# CHECK 3: Agent Gateway Liveness + Streaming
+# CHECK 3: Agent Gateway Liveness + Streaming (now covers all agents)
 # ═══════════════════════════════════════════════════════════════════
 
 def check_agents():
@@ -180,12 +239,25 @@ def check_agents():
         user = agent.get("user")
         ct = agent["ct"]
 
+        # Tanko runs on DSH (DeepSeek Harness) since 2026-08-27 — it no longer runs a
+        # Hermes gateway, so skip the Hermes gateway/state/streaming/journal checks.
+        if agent.get("runtime") == "dsh":
+            live = ssh(host, "true", user=user)
+            print(f"  {'✅' if live is not None else '❌'} {name}: DSH (DeepSeek Harness) — "
+                  f"no Hermes gateway since 2026-08-27 (CT {ct}, SSH {'OK' if live is not None else 'FAIL'})")
+            if live is None:
+                FAIL.append(f"unreachable:{name}")
+            continue
+
         if not host or not user:
             print(f"  ⬜ {name} (CT {ct}): cannot SSH — skip liveness check")
             continue
 
-        # Gateway process (exclude the infisical bash wrapper that contains the same string)
+        # Gateway process
         pid = ssh(host, "pgrep -f 'hermes_cli.main gateway run' | grep -v infisical | head -1", user=user)
+        if not pid:
+            # Try alternate binary name
+            pid = ssh(host, "pgrep -f 'hermes.*gateway' | grep -v infisical | grep -v bash | head -1", user=user)
         if not pid:
             print(f"  ❌ {name}: GATEWAY NOT RUNNING")
             FAIL.append(f"gateway-down:{name}")
@@ -203,7 +275,7 @@ def check_agents():
         else:
             gw_state, zulip = "no-state-file", "?"
 
-        # Zulip streaming: does adapter have edit_message?
+        # Zulip streaming check
         adapter_paths = [
             "~/.hermes/plugins/zulip-platform/adapter.py",
             "~/.hermes/plugins/platforms/zulip/adapter.py",
@@ -220,13 +292,191 @@ def check_agents():
             r"journalctl --user -u hermes-gateway --since '10 min ago' -o cat --no-pager 2>/dev/null "
             r"| grep -ci 'error\|traceback\|exception\|401\|403\|500' || echo 0",
             user=user)
-        recent_errors = (recent_errors or "0").strip().split("\n")[-1]  # take last line
+        recent_errors = (recent_errors or "0").strip().split("\n")[-1]
 
         print(f"  {'✅' if gw_state == 'running' and zulip == 'connected' else '⚠️'} "
               f"{name}: gw={gw_state} zulip={zulip} streaming={streaming} "
               f"errors_10m={recent_errors.strip() or '0'} pid={pid}")
 
 
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 4: CT Liveness (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_ct_liveness():
+    """Check that all agent CTs are running on their PVE nodes."""
+    for name, agent in AGENTS.items():
+        ct = agent["ct"]
+        pve_node = agent.get("pve")
+        if not pve_node:
+            print(f"  ⬜ {name} (CT {ct}): no PVE node mapped — skip")
+            continue
+
+        pve_ip = PVE_NODES.get(pve_node)
+        if not pve_ip:
+            print(f"  ⬜ {name}: unknown PVE node '{pve_node}' — skip")
+            continue
+
+        status = ssh(pve_ip, f"pct status {ct} 2>/dev/null", user="root")
+        if not status:
+            print(f"  ❌ {name} (CT {ct} on {pve_node}): PVE UNREACHABLE")
+            FAIL.append(f"ct-unreachable:{name}:{pve_ip}")
+        elif "running" in status:
+            print(f"  ✅ {name} (CT {ct} on {pve_node}): running")
+        elif "stopped" in status:
+            print(f"  ❌ {name} (CT {ct} on {pve_node}): STOPPED")
+            FAIL.append(f"ct-stopped:{name}")
+        else:
+            print(f"  ⚠️  {name} (CT {ct} on {pve_node}): {status.strip()}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 5: Config YAML Integrity (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_config_integrity():
+    """Verify agent config.yaml parses as valid YAML."""
+    for name, agent in AGENTS.items():
+        # Tanko runs on DSH (DeepSeek Harness) since 2026-08-27 — no Hermes config.yaml.
+        if agent.get("runtime") == "dsh":
+            print(f"  ⏭️ {name}: DSH — no Hermes config.yaml since 2026-08-27")
+            continue
+        host = agent.get("host")
+        user = agent.get("user")
+        if not host or not user:
+            print(f"  ⬜ {name}: cannot SSH — skip config check")
+            continue
+
+        # Check YAML parses
+        yaml_ok = ssh(host,
+            "python3 -c "
+            '"import yaml; yaml.safe_load(open(\'/root/.hermes/config.yaml\')); print(\'OK\')" '
+            "2>&1 || echo 'FAIL'",
+            user=user)
+        if not yaml_ok:
+            print(f"  ❌ {name}: SSH UNREACHABLE (config check skipped)")
+            FAIL.append(f"config-unreachable:{name}")
+        elif "OK" in yaml_ok:
+            print(f"  ✅ {name}: config.yaml valid YAML")
+        else:
+            print(f"  ❌ {name}: config.yaml YAML ERROR — {yaml_ok[:120]}")
+            FAIL.append(f"config-yaml-error:{name}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 6: Wrapper/CLI Integrity (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_wrapper_integrity():
+    """Verify the hermes CLI wrapper exists and can reach hermes-real."""
+    for name, agent in AGENTS.items():
+        # Tanko runs on DSH (DeepSeek Harness) since 2026-08-27 — no hermes CLI wrapper.
+        if agent.get("runtime") == "dsh":
+            print(f"  ⏭️ {name}: DSH — no hermes CLI wrapper since 2026-08-27")
+            continue
+        host = agent.get("host")
+        user = agent.get("user")
+        if not host or not user:
+            print(f"  ⬜ {name}: cannot SSH — skip wrapper check")
+            continue
+
+        # Check wrapper exists
+        wrapper = ssh(host, "ls -la /root/.local/bin/hermes 2>/dev/null", user=user)
+        if not wrapper:
+            # Check alternate wrapper locations
+            wrapper = ssh(host, "which hermes 2>/dev/null; command -v hermes 2>/dev/null", user=user)
+            if not wrapper:
+                print(f"  ❌ {name}: NO HERMES CLI WRAPPER FOUND")
+                FAIL.append(f"wrapper-missing:{name}")
+                continue
+            else:
+                print(f"  ⚠️  {name}: hermes at {wrapper.strip()} (not ~/.local/bin/hermes)")
+
+        # Check wrapper has correct infisical path
+        infisical_path_valid = ssh(host,
+            "head -20 /root/.local/bin/hermes 2>/dev/null | grep -q '/usr/bin/infisical' && echo OK || echo MISS",
+            user=user)
+        if infisical_path_valid == "MISS":
+            # Check if infisical exists on path
+            inf_actual = ssh(host, "command -v infisical 2>/dev/null", user=user)
+            if not inf_actual:
+                print(f"  ❌ {name}: INFISICAL NOT INSTALLED (wrapper broken)")
+                FAIL.append(f"wrapper-no-infisical:{name}")
+            else:
+                print(f"  ⚠️  {name}: wrapper infisical path may be wrong (infisical at {inf_actual})")
+                FAIL.append(f"wrapper-infisical-path:{name}")
+
+        # Check hermes-real exists
+        hermes_real = ssh(host,
+            "ls -la /root/.local/bin/hermes-real 2>/dev/null || echo MISS",
+            user=user)
+        if not hermes_real or hermes_real.strip() == "MISS":
+            # Check venv path
+            hermes_real = ssh(host,
+                "ls -la /usr/local/lib/hermes-agent/venv/bin/hermes 2>/dev/null || echo MISS",
+                user=user)
+            if not hermes_real or hermes_real.strip() == "MISS":
+                print(f"  ❌ {name}: hermes-real NOT FOUND (wrapper broken)")
+                FAIL.append(f"wrapper-no-hermes-real:{name}")
+            else:
+                print(f"  ✅ {name}: hermes-real at alt path")
+
+        # Check the .env file has the key
+        env_has_key = ssh(host,
+            "grep -c 'LITELLM_API_KEY' /root/.hermes/.env 2>/dev/null || echo 0",
+            user=user)
+        if env_has_key and env_has_key.strip() not in ("", "0"):
+            print(f"  ✅ {name}: wrapper + .env key present")
+        else:
+            print(f"  ⚠️  {name}: .env may be missing LITELLM_API_KEY entry")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# CHECK 7: Vault Secret Non-Emptiness (NEW)
+# ═══════════════════════════════════════════════════════════════════
+
+def check_vault_secrets():
+    """Verify agent-specific vault secrets are non-empty and start with sk-."""
+    for name, agent in AGENTS.items():
+        vault_key_name = agent.get("vault_key")
+        if not vault_key_name:
+            continue
+
+        key = agent.get("key")
+        if not key:
+            print(f"  ❌ {name}: vault secret {vault_key_name} MISSING or EMPTY")
+            FAIL.append(f"vault-empty:{name}:{vault_key_name}")
+        elif not key.startswith("sk-"):
+            print(f"  ❌ {name}: vault secret {vault_key_name} WRONG FORMAT (starts '{key[:8]}...')")
+            FAIL.append(f"vault-bad-format:{name}:{vault_key_name}")
+        else:
+            print(f"  ✅ {name}: vault {vault_key_name}=sk-...{key[-4:]}")
+
+
+# ═══════════════════════════════════════════════════════════════════
+# DEPLOY: copy updated script to /root/scripts/ on local host
+# ═══════════════════════════════════════════════════════════════════
+
+def deploy_self():
+    """Copy this script to /root/scripts/agent-health-check.py if out of date."""
+    dest = "/root/scripts/agent-health-check.py"
+    try:
+        with open(__file__, "r") as f:
+            current = f.read()
+        if os.path.isfile(dest):
+            with open(dest, "r") as f:
+                existing = f.read()
+            if current == existing:
+                return  # Already deployed
+        # Write new version
+        with open(dest, "w") as f:
+            f.write(current)
+        os.chmod(dest, 0o755)
+        print(f"  📦 Deployed updated script to {dest}")
+    except:
+        pass  # Not fatal if deploy fails
+
+
 # ═══════════════════════════════════════════════════════════════════
 # MAIN
 # ═══════════════════════════════════════════════════════════════════
@@ -235,8 +485,12 @@ def main():
     quiet = "--quiet" in sys.argv
     as_json = "--json" in sys.argv
 
+    # Self-deploy to canonical location
+    if not quiet and "--no-deploy" not in sys.argv:
+        deploy_self()
+
     if not quiet:
-        print(f"🏥 Agent Health Check — {datetime.now().strftime('%Y-%m-%d %H:%M UTC')}")
+        print(f"🏥 Agent Health Check v2 — {datetime.now().strftime('%Y-%m-%d %H:%M UTC')}")
         print()
 
     print("🔑 LiteLLM Keys:")
@@ -249,11 +503,26 @@ def main():
 
     print("🤖 Agent Gateways:")
     check_agents()
+    print()
+
+    print("🖥️  CT Liveness:")
+    check_ct_liveness()
+    print()
+
+    print("📝 Config Integrity:")
+    check_config_integrity()
+    print()
+
+    print("🔌 Wrapper/CLI Integrity:")
+    check_wrapper_integrity()
+    print()
+
+    print("🔐 Vault Secrets:")
+    check_vault_secrets()
 
     if FAIL:
         print(f"\n❌ {len(FAIL)} FAILURE(S): {' | '.join(FAIL)}")
         if quiet:
-            # In quiet mode, only print failures as a single alert line
             print(f"ALERT agent-health:{','.join(FAIL)}")
     elif not quiet:
         print("\n✅ All checks passed")

scripts/daily-infra-report.py

@@ -296,25 +296,20 @@ def collect():
         "pm2_uptime": pm2.get("uptime", "?"),
     }
     
-    # Tanko (CT 122)
-    tanko_state = ssh_jerome("192.168.68.122", "cat ~/.hermes/gateway_state.json 2>/dev/null")
-    tanko_data = {}
-    try:
-        tanko_data = json.loads(tanko_state) if tanko_state else {}
-    except:
-        tanko_data = {}
-    platforms = tanko_data.get("platforms", {})
+    # Tanko (CT 112, IP 192.168.68.122) — DSH (DeepSeek Harness), no Hermes gateway
+    # since 2026-08-27. There is no ~/.hermes/gateway_state.json on CT 112 anymore;
+    # Zulip/Telegram connectivity is managed by the DSH harness, not the Hermes gateway.
     report["agents"]["tanko"] = {
-        "platform": "hermes", "ct": 112, "ip": "192.168.68.122",
-        "gateway_state": tanko_data.get("gateway_state", "unknown"),
-        "zulip_state": platforms.get("zulip", {}).get("state", "unknown"),
-        "telegram_state": platforms.get("telegram", {}).get("state", "unknown"),
-        "gateway_pid": tanko_data.get("pid"),
-        "updated_at": tanko_data.get("updated_at"),
+        "platform": "dsh", "ct": 112, "ip": "192.168.68.122",
+        "gateway_state": "n/a (DSH)",
+        "zulip_state": "unknown",
+        "telegram_state": "unknown",
+        "gateway_pid": None,
+        "updated_at": "",
     }
     
-    # Mumuni (CT 114, IP 192.168.68.123)
-    mumuni_state = ssh("192.168.68.123", "cat ~/.hermes/gateway_state.json 2>/dev/null")
+    # Mumuni (CT 100, IP 192.168.68.24)
+    mumuni_state = ssh("192.168.68.24", "cat ~/.hermes/gateway_state.json 2>/dev/null")
     mumuni_data = {}
     try:
         mumuni_data = json.loads(mumuni_state) if mumuni_state else {}
@@ -322,7 +317,7 @@ def collect():
         mumuni_data = {}
     mumuni_platforms = mumuni_data.get("platforms", {})
     report["agents"]["mumuni"] = {
-        "platform": "hermes", "ct": 114, "ip": "192.168.68.123",
+        "platform": "hermes", "ct": 100, "ip": "192.168.68.24",
         "gateway_state": mumuni_data.get("gateway_state", "unknown"),
         "telegram_state": mumuni_platforms.get("telegram", {}).get("state", "unknown"),
         "zulip_state": mumuni_platforms.get("zulip", {}).get("state", "not_installed"),
@@ -330,7 +325,7 @@ def collect():
         "hermes_version": "",
     }
     # Get Hermes version
-    ver = ssh("192.168.68.123", "hermes --version 2>/dev/null | head -1")
+    ver = ssh("192.168.68.24", "hermes --version 2>/dev/null | head -1")
     if ver:
         report["agents"]["mumuni"]["hermes_version"] = ver.split("·")[0].replace("Hermes Agent ","").strip()
     
@@ -543,7 +538,7 @@ th {{ color: #8b949e; font-weight: normal; }}
         elif name == "tanko":
             zulip_state = "✅" if agent.get("zulip_state") == "connected" else ("❌" if agent.get("zulip_state") == "disconnected" else "⬜")
             gateway = agent.get("gateway_state", "?")
-            processed = agent.get("updated_at", "")[:10]
+            processed = "DSH"
         elif name == "mumuni":
             zulip_state = "⬜" if agent.get("zulip_state") == "not_installed" else ("✅" if agent.get("zulip_state") == "connected" else "⬜")
             gateway = agent.get("gateway_state", "?")

scripts/netbird-add-domain.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# Netbird Reverse Proxy — Add a new domain route
+#
+# Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]
+#
+# Example:
+#   netbird-add-domain.sh dns.sysloggh.net 192.168.68.10 80
+#
+# This script adds a domain to the Netbird proxy by inserting records
+# directly into the management server's SQLite database, then restarting
+# the proxy stack.
+#
+# Prerequisites: SSH root access to 72.61.0.17
+#                sqlite3 available on VPS
+#
+# Requires: The domain must already have a DNS CNAME to netbird.sysloggh.net
+#           pointing to 72.61.0.17.
+
+set -euo pipefail
+
+DOMAIN="${1:?Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]}"
+BACKEND_IP="${2:?Usage: netbird-add-domain.sh <domain> <backend_ip> [port] [protocol]}"
+PORT="${3:-80}"
+PROTOCOL="${4:-http}"
+
+VPS="root@72.61.0.17"
+DB_VOLUME="/var/lib/docker/volumes/root_netbird_data/_data"
+DB="$DB_VOLUME/store.db"
+
+echo "=== Adding Netbird proxy route ==="
+echo "Domain:    $DOMAIN"
+echo "Backend:   $BACKEND_IP:$PORT ($PROTOCOL)"
+echo ""
+
+ssh "$VPS" bash << REMOTESCRIPT
+set -euo pipefail
+
+# Generate unique ID using timestamp hash (Netbird format)
+ID_SUFFIX=\$(date +%s | md5sum | head -c 16)
+SVC_ID="d9\${ID_SUFFIX}ptsnc73\$(date +%s | md5sum | head -c 10)"
+TGT_ID=\$(sqlite3 "$DB" "SELECT COALESCE(MAX(id), 100) + 1 FROM targets;")
+ACCOUNT_ID="d88av3aptsnc73clmogg"
+ZONE_ID="d8adqjaptsnc73fro5g0"
+
+echo "Service ID: \$SVC_ID"
+echo "Target ID:  \$TGT_ID"
+
+# Insert service
+sqlite3 "$DB" "INSERT INTO services (id, account_id, name, domain, proxy_cluster, enabled, terminated, pass_host_header, rewrite_redirects, mode, source, port_auto_assigned, private) VALUES (\"\$SVC_ID\", \"\$ACCOUNT_ID\", \"$DOMAIN\", \"$DOMAIN\", \"netbird.sysloggh.net\", 1, 0, 1, 0, \"http\", \"permanent\", 0, 0);"
+echo "Service: OK"
+
+# Insert target
+sqlite3 "$DB" "INSERT INTO targets (id, account_id, service_id, host, port, protocol, target_id, target_type, enabled, skip_tls_verify, request_timeout, session_idle_timeout, agent_network, disable_access_log) VALUES (\$TGT_ID, \"\$ACCOUNT_ID\", \"\$SVC_ID\", \"$BACKEND_IP\", $PORT, \"$PROTOCOL\", \"\$ZONE_ID\", \"subnet\", 1, 0, 0, 0, 0, 0);"
+echo "Target:  OK"
+
+# Verify
+sqlite3 -column "$DB" "SELECT s.name, t.host, t.port, t.protocol FROM services s JOIN targets t ON s.id=t.service_id WHERE s.name=\"$DOMAIN\";"
+
+echo ""
+echo "Restarting proxy stack..."
+cd /root && docker compose restart netbird-server 2>/dev/null
+sleep 15
+docker compose restart proxy 2>/dev/null
+echo "Done. Verify with: curl -sI https://$DOMAIN"
+REMOTESCRIPT

scripts/pct-run.sh

@@ -11,32 +11,31 @@ set -euo pipefail
 # ── CT ID → PVE Node mapping (maintained HERE, not in prose contracts) ──
 declare -A CT_NODES=(
     # amdpve (192.168.68.15)
-    [100]=amdpve    # abiba
-    [105]=amdpve    # kagentz
     [111]=amdpve    # tdunna
     [112]=amdpve    # tanko
     [113]=amdpve    # baggy
     [115]=amdpve    # scottdenya
-    # hwepve (192.168.68.4) — Huawei Matebook 16
-    [114]=hwepve   # mumuni (migrated from minipve 2026-07-20)
     # minipve (192.168.68.12)
+    [102]=minipve   # adguard (was acerpve)
     [104]=minipve   # authentik
     [110]=minipve   # gitea
     [116]=minipve   # syslog-api
+    [119]=minipve   # infisical-vault
     # storepve (192.168.68.6)
     [106]=storepve  # ra-h-os
     [107]=storepve  # proxmox-backup
     [108]=storepve  # media
     [117]=storepve  # zulip
-    # acerpve (192.168.68.9)
-    [102]=acerpve   # adguard
+    [118]=storepve  # jdownloader
+    # acerpve (192.168.68.9) — no CTs (bare metal GPU .8)
+    [100]=minipve   # abiba (was hwepve)
+    [105]=minipve   # kagentz (was hwepve)
     # ocupve (192.168.68.5) — no CTs (bare metal GPU .110)
     #
     # REMOVED CTs (migrated to bare metal, decommissioned, or VMs):
     #   101 llm-gpu   → bare metal 192.168.68.8   (RTX 3090)
     #   103 ocu-llm   → bare metal 192.168.68.110 (RTX 5070)
     #   109 docker-vm → KVM VM 192.168.68.7       (use direct SSH)
-    #   118 jitsi     → stopped, not in service
 )
 
 # Each node must be root-accessible via SSH hostname
@@ -49,7 +48,6 @@ declare -A NODE_IPS=(
     [storepve]=192.168.68.6
     [acerpve]=192.168.68.9
     [ocupve]=192.168.68.5
-    [hwepve]=192.168.68.4
 )
 
 resolve_node() {
@@ -76,7 +74,7 @@ main() {
     if [[ $# -lt 1 ]]; then
         echo "Usage: pct-run <CT_ID> [command...]" >&2
         echo "  pct-run 112 cat /etc/hostname" >&2
-        echo "  pct-run 114 systemctl status hermes-gateway" >&2
+        echo "  pct-run 100 systemctl status hermes-gateway" >&2
         echo ""
         echo "Known CTs:" >&2
         for ct in $(echo "${!CT_NODES[@]}" | tr ' ' '\n' | sort -n); do

scripts/pm2-self-heal.sh

@@ -33,7 +33,7 @@ TEL_LINE=$(echo "$STATUS" | grep "abiba-telegram")
 TEL_STATUS=$(echo "$TEL_LINE" | awk -F'│' '{print $10}' | xargs)
 TEL_RESTARTS=$(echo "$TEL_LINE" | awk -F'│' '{print $9}' | xargs)
 
-if [ "$TEL_STATUS" != "online" ]; then
+if [ "$TEL_STATUS" != "online" ] || [ "$TEL_RESTARTS" -gt 1000 ]; then
     pm2 restart abiba-telegram > /dev/null 2>&1
     sleep 3
     TEL_LINE2=$(pm2 status --no-color 2>/dev/null | grep "abiba-telegram")

scripts/prose-ai-review.sh

@@ -46,25 +46,25 @@ You are a code reviewer for OpenProse infrastructure contracts in the Syslog Sol
 
 The infrastructure-control.prose.md contract is the canonical reference for the cluster topology:
 
-**Proxmox Cluster "Tabiri" (6 nodes):**
-- amdpve (192.168.68.15): abiba, kagentz, tanko, tdunna, baggy, scottdenya
-- minipve (192.168.68.12): authentik, gitea, syslog-api, jitsi
-- storepve (192.168.68.6): docker-vm, ra-h-os, PBS, media, zulip
-- acerpve (192.168.68.9): llm-gpu, adguard
+**Proxmox Cluster "Tabiri" (5 nodes):**
+- amdpve (192.168.68.15): tanko, tdunna, baggy, scottdenya
+- minipve (192.168.68.12): abiba, kagentz, adguard, authentik, gitea, syslog-api, infisical-vault
+- storepve (192.168.68.6): docker-vm, ra-h-os, PBS, media, jdownloader, zulip
+- acerpve (192.168.68.9): llm-gpu
 - ocupve (192.168.68.5): ocu-llm
-- hwepve (192.168.68.4): mumuni (migrated from minipve 2026-07-20, Huawei Matebook 16, 12C/15GB)
 
-**CT IDs (verified 2026-07-04 against PVE API):**
+**CT IDs (verified 2026-07-24 against PVE API):**
 100:abiba  102:adguard  104:authentik  105:kagentz  106:ra-h-os
 107:pbs    108:media    110:gitea      111:tdunna   112:tanko
-113:baggy  114:mumuni   115:scottdenya  116:syslog-api 117:zulip
+113:baggy  115:scottdenya  116:syslog-api 117:zulip
+118:jdownloader  119:infisical-vault
 
 **NO CT 122, CT 123, or .19 exist in the cluster.**
 
 **CRITICAL RULES (never regress):**
 1. NO /grafana/ nginx route — it was tried and reverted on 2026-07-02. Grafana is direct LAN at :3001.
 2. NO .19 IP — Zulip is CT 117 on storepve.
-3. NO CT 122/123 — Tanko=CT 112, Mumuni=CT 114.
+3. NO CT 122/123 — Tanko=CT 112, Mumuni=CT 100 (inside Abiba). No CT 114 anywhere.
 4. Strix Halo :8080 is FIREWALLED to .116 only — cannot be probed from abiba (.24).
 5. abiba-zulip PM2 process is DECOMMISSIONED (2026-07-04) — abiba uses Telegram only.
 

scripts/prose-auth-check.sh

@@ -12,10 +12,10 @@ echo ""
 # Authorized agents for restricted contracts
 # Format: contract_pattern|authorized_agents (comma-separated)
 declare -A RESTRICTED
-RESTRICTED["infrastructure-control.prose.md"]="abiba"
-RESTRICTED["proxmox-monitor.prose.md"]="abiba"
-RESTRICTED["hermes-config-template.prose.md"]="abiba,mumuni,tanko"
-RESTRICTED["zulip-health.prose.md"]="abiba,mumuni"
+RESTRICTED["infrastructure-control.prose.md"]="abiba,abiba-bot,tanko,tanko-bot,mumuni,mumuni-bot"
+RESTRICTED["proxmox-monitor.prose.md"]="abiba,abiba-bot"
+RESTRICTED["hermes-config-template.prose.md"]="abiba,abiba-bot,mumuni,mumuni-bot,tanko,tanko-bot"
+RESTRICTED["zulip-health.prose.md"]="abiba,abiba-bot,mumuni,mumuni-bot,tanko,tanko-bot"
 RESTRICTED["scripts/pm2-self-heal.sh"]="abiba"
 RESTRICTED["scripts/prose-lint.sh"]="abiba"
 RESTRICTED["scripts/prose-ai-review.sh"]="abiba"

scripts/prose-lint.sh

@@ -90,12 +90,16 @@ echo "── 3. Cross-contract consistency ──"
 
 # Check that contracts referencing each other have correct names
 if [ -f "infrastructure-control.prose.md" ]; then
-  # Any contract that claims to check "all 6 PVE nodes" should name them
+  # Any contract that claims to check "all 5 PVE nodes" should name them
   for f in *.prose.md; do
     [ -f "$f" ] || continue
-    if grep -qE "\b5-node\b|\b5 node\b|\b5 Proxmox\b|all 5 PVE" "$f" 2>/dev/null; then
-      echo "  ⚠️  $f: still references 5-node cluster (migrated to 6 nodes 2026-07-20)"
-      WARNINGS=$((WARNINGS + 1))
+    if grep -q "5-node\|5 node\|5 Proxmox\|all.*PVE.*node" "$f" 2>/dev/null; then
+      for node in amdpve minipve storepve acerpve ocupve; do
+        grep -q "$node" "$f" || {
+          echo "  ⚠️  $f: references 5 nodes but '$node' not mentioned"
+          WARNINGS=$((WARNINGS + 1))
+        }
+      done
     fi
   done
 fi

scripts/swap-gpu-dense-model.sh

@@ -0,0 +1,91 @@
+#!/bin/bash
+# swap-gpu-dense-model.sh — Swap RTX 3090 from qwen3.6-27B-code to SmartCode-Fable-5
+# Run when download completes: ssh root@192.168.68.8 'bash -s' < this script
+#
+# Usage: bash swap-gpu-dense-model.sh
+# Requires: new model at /home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf
+
+set -e
+
+MODEL_PATH="/home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf"
+OLD_WRAPPER="/home/llmuser/llama-wrapper.sh"
+
+echo "═══ Swapping gpu-dense to SmartCode-Fable-5 ═══"
+
+# 1. Verify model file
+if [ ! -f "$MODEL_PATH" ]; then
+    echo "❌ Model not found at $MODEL_PATH"
+    echo "   Download: curl -L -o $MODEL_PATH <huggingface-url>"
+    exit 1
+fi
+
+MODEL_SIZE=$(ls -lh "$MODEL_PATH" | awk '{print $5}')
+echo "✅ Model found: $MODEL_SIZE"
+
+# 2. Create new wrapper script for SmartCode-Fable-5
+cat > /home/llmuser/llama-fable-wrapper.sh << 'WRAPPER'
+#!/bin/bash
+# SmartCode-Fable-5 llama-server wrapper for RTX 3090
+# Sampler settings from model card: temp 0.9, top-p 0.95, top-k 60, repeat-penalty off
+
+PORT=8080
+GHOST_PID=$(ss -tlnp 2>/dev/null | grep -Po ":${PORT}\s+.*pid=\K[0-9]+" | head -1)
+if [ -n "$GHOST_PID" ] && [ "$GHOST_PID" != "$$" ]; then
+    echo "[wrapper] Port $PORT occupied by ghost pid $GHOST_PID — cleaning up" >&2
+    kill -9 "$GHOST_PID" 2>/dev/null
+    sleep 2
+fi
+
+exec /usr/local/bin/llama-server \
+    --model /home/llmuser/models/SmartCode-Fable-5-27B-UD-Q4_K_XL.gguf \
+    --ctx-size 131072 \
+    --cache-type-k q4_0 \
+    --cache-type-v q4_0 \
+    --flash-attn 1 \
+    --cont-batching \
+    --parallel 1 \
+    --batch-size 2048 \
+    --ubatch-size 1024 \
+    --n-gpu-layers 99 \
+    --temp 0.9 \
+    --top-p 0.95 \
+    --top-k 60 \
+    --min-p 0.0 \
+    --repeat-penalty 1.0 \
+    --api-key not-needed \
+    --port 8080 \
+    --host 0.0.0.0
+WRAPPER
+
+chmod 755 /home/llmuser/llama-fable-wrapper.sh
+echo "✅ Created /home/llmuser/llama-fable-wrapper.sh"
+
+# 3. Update systemd service to use new wrapper
+echo "📝 Updating systemd service..."
+sed -i 's|ExecStart=/home/llmuser/llama-wrapper.sh|ExecStart=/home/llmuser/llama-fable-wrapper.sh|' /etc/systemd/system/llama-server.service
+systemctl daemon-reload
+
+# 4. Stop old server, start new
+echo "🔄 Restarting llama-server..."
+systemctl stop llama-server
+sleep 3
+systemctl start llama-server
+sleep 8
+
+# 5. Verify
+echo ""
+echo "═══ Verification ═══"
+systemctl is-active llama-server
+echo ""
+echo "Port 8080:"
+ss -tlnp 2>/dev/null | grep ":8080" | head -1
+echo ""
+echo "GPU VRAM:"
+nvidia-smi --query-gpu=memory.used,memory.total,utilization.gpu --format=csv,noheader 2>/dev/null
+echo ""
+echo "=== Health check ==="
+curl -s --max-time 5 http://localhost:8080/health 2>/dev/null
+echo ""
+echo ""
+echo "✅ Swap complete. Test via LiteLLM:"
+echo "  curl -s http://192.168.68.116/v1/chat/completions -H 'Authorization: Bearer <key>' -H 'Content-Type: application/json' -d '{\"model\":\"gpu-dense\",\"messages\":[{\"role\":\"user\",\"content\":\"write hello world in python\"}],\"max_tokens\":100}'"

scripts/zulip-monitor.sh

@@ -81,26 +81,14 @@ else
   echo "  Abiba: ✅ Connected (processed=$(echo "$PI_HEALTH" | python3 -c "import sys,json; d=json.load(sys.stdin); print(d.get('messages_processed',0))" 2>/dev/null))" >> "$LOG"
 fi
 
-# ── Platform B: Hermes (Tanko) ──
-TANKO_STATE=$(ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 jerome@192.168.68.122 \
-  "cat ~/.hermes/gateway_state.json 2>/dev/null" 2>/dev/null || echo "{}")
-TANKO_ZULIP=$(echo "$TANKO_STATE" | python3 -c "
-import sys,json
-d=json.load(sys.stdin)
-p=d.get('platforms',{}).get('zulip',{})
-print(p.get('state','unknown'))
-" 2>/dev/null)
-
-if [ "$TANKO_ZULIP" != "connected" ]; then
-  notify "🔴" "Tanko (Hermes) Zulip state: $TANKO_ZULIP — needs restart"
-  ISSUES=$((ISSUES + 1))
-  echo "  Tanko: ❌ state=$TANKO_ZULIP" >> "$LOG"
-else
-  echo "  Tanko: ✅ Zulip connected" >> "$LOG"
-fi
+# ── Platform B: Tanko (DSH) ──
+# Tanko moved to DSH (DeepSeek Harness) on 2026-08-27. It no longer runs a Hermes
+# gateway, so there is no ~/.hermes/gateway_state.json on CT 112 (.122) to probe.
+# Zulip connectivity for tanko is managed by the DSH harness; skip the legacy SSH probe.
+echo "  Tanko: ⏭️ skipped (DSH — no Hermes gateway since 2026-08-27)" >> "$LOG"
 
 # ── Platform B: Hermes (Mumuni) ──
-MUMUNI_STATE=$(ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 root@192.168.68.123 \
+MUMUNI_STATE=$(ssh -o StrictHostKeyChecking=no -o ConnectTimeout=5 root@192.168.68.24 \
   "cat ~/.hermes/gateway_state.json 2>/dev/null" 2>/dev/null || echo "{}")
 MUMUNI_ZULIP=$(echo "$MUMUNI_STATE" | python3 -c "
 import sys,json

zulip-health.prose.md

@@ -1,7 +1,7 @@
 ---
 kind: responsibility
 name: zulip-health
-description: Multi-platform health monitor for the Zulip messaging mesh spanning Platform A (Agent Zero Docker), Platform B (Hermes agents Tanko/Mumuni), and the Zulip bridge. Verifies bot registration, DM delivery, and cross-platform connectivity.
+description: Multi-platform health monitor for the Zulip messaging mesh spanning Platform A (Agent Zero Docker), Platform B (Tanko on DSH / Mumuni on Hermes), and the Zulip bridge. Verifies bot registration, DM delivery, and cross-platform connectivity.
 title: Zulip Mesh Health Monitor — Multi-Platform
 version: 3.0.0
 runtime_contract: 2
@@ -10,13 +10,13 @@ agent: abiba
 
 # Zulip Mesh Health Monitor
 
-Monitors ALL Zulip-connected agents across three platforms (pi, Hermes, Agent Zero).
+Monitors ALL Zulip-connected agents across platforms (pi, Hermes, DSH, Agent Zero).
 Runs every 15 minutes in the background. Also triggers on session start.
 
 ## Requires
 
 - **Zulip API key** for `abiba-bot@chat.sysloggh.net` in `$ZULIP_API_KEY`
-- **SSH access** to Tanko (192.168.68.122), Mumuni (192.168.68.123, lxc/114 on hwepve since 2026-07-20), and Agent Zero Docker host (192.168.68.14)
+- **SSH access** to Tanko (192.168.68.122), Mumuni (192.168.68.24, inside Abiba CT100 on minipve), and Agent Zero Docker host (192.168.68.14)
 - **PM2** on localhost for pi process management
 - **Network access** to `chat.sysloggh.net`, `localhost:9200`
 - **Write access** to `/root/zulip-health-monitor.log` and `/tmp/zulip-monitor-debounce`
@@ -45,7 +45,7 @@ Runs every 15 minutes in the background. Also triggers on session start.
     "severity": "healthy"
   },
   "tanko": {
-    "platform": "hermes",
+    "platform": "dsh",
     "zulip_state": "connected",
     "heartbeat_age_seconds": 45,
     "gateway_pid": 1234,
@@ -81,13 +81,13 @@ Log as "unreachable" — don't treat as critical unless it persists for 3+ conse
 ## Streaming Support (2026-07-05)
 
 Zulip agents now support progressive message editing during agent generation.
-When a Hermes agent (Tanko, Mumuni) processes a message, the response is
+When a Zulip agent (Tanko on DSH, Mumuni on Hermes) processes a message, the response is
 streamed in real-time via Zulip's `PATCH /api/v1/messages/{id}` API:
 
 - Adapter implements `edit_message()` using `_api_patch()` helper
 - Gateway stream consumer progressively edits the Zulip message
 - User sees real-time agent thinking instead of waiting for full response
-- Verified: Tanko (CT 112) and Mumuni (CT 114) both have streaming active
+- Verified: Tanko (CT 112) and Mumuni (inside Abiba CT 100) both have streaming active
 
 ### Verification
 ```bash
@@ -182,15 +182,16 @@ grep -a "Finalized\|Failed to finalize" /root/.pm2/logs/abiba-zulip-out.log | ta
 | `last_error` set | Log and monitor |
 | Crash loop >10/h | Alert user |
 
-### Step 3: Platform B — Hermes (Tanko .122, Mumuni .123)
+### Step 3: Platform B — Tanko (DSH, .122) & Mumuni (Hermes, .24)
 
 **B1: Gateway State**
 
 ```bash
-ssh root@192.168.68.122 "cat ~/.hermes/gateway_state.json"
-ssh root@192.168.68.123 "cat ~/.hermes/gateway_state.json"
+ssh root@192.168.68.24 "cat ~/.hermes/gateway_state.json"  # Mumuni inside Abiba CT100
 ```
 
+Tanko runs on DSH (DeepSeek Harness) — it no longer runs a Hermes gateway, so there is no `~/.hermes/gateway_state.json` on CT 112 (.122). Verify Tanko's Zulip connectivity via the DSH harness bot status instead.
+
 Check `platforms.zulip.state`: `connected` ✅ | `disconnected` ❌ | `error` ❌ | missing → not installed.
 
 **B2: Agent Process**
@@ -199,21 +200,28 @@ Check `platforms.zulip.state`: `connected` ✅ | `disconnected` ❌ | `error`
 ssh root@<CT> "ps aux | grep 'gateway run' | grep -v grep"
 ```
 
-Gateway PID should exist with uptime > 60s. **Dual-gateway detection**: if more than one `gateway run` process is found, the gateway has a collision (typically one `--force` and one `--replace` process). Kill the newer/duplicate process, then restart the remaining gateway: for Mumuni (PM2-managed), use `pm2 restart mumuni-zulip`; for Tanko (systemd/non-PM2), use `hermes gateway restart`. Check gateway log for "Gateway running with 2 platform(s)" (not 1) to confirm Zulip reloaded.
+Gateway PID should exist with uptime > 60s. **Dual-gateway detection**: if more than one `gateway run` process is found, the gateway has a collision (typically one `--force` and one `--replace` process). Kill the newer/duplicate process, then restart the remaining gateway per-agent (parameterized 2026-08-09, captain ruling):
 
-**B3: Heartbeat Verification**
+| Agent | Restart command | Notes |
+|-------|-----------------|-------|
+| Mumuni (.24) | `pm2 restart abiba-zulip` | Hermes gateway runs under PM2 as `abiba-zulip` |
+| Tanko (.122) | DSH harness — restart via its DSH service, not a Hermes gateway | Tanko runs on DSH (CT 112) since 2026-08-27; no longer a Hermes agent, no `~/.hermes` gateway, no PM2 `mumuni-zulip` process |
+
+Check gateway log for "Gateway running with 2 platform(s)" (not 1) to confirm Zulip reloaded.
+
+**B3: Heartbeat Verification** (Hermes agent Mumuni only — Tanko has no Hermes gateway)
 
 ```bash
-ssh root@<CT> "grep Heartbeat ~/.hermes/logs/agent.log | tail -3"
+ssh root@192.168.68.24 "grep Heartbeat ~/.hermes/logs/agent.log | tail -3"
 ```
 
 Expected: recent heartbeat (within 5 min), `polls=N` incrementing.
 Silence > 300s → warning. Silence > 600s → critical.
 
-**B4: Response Delivery**
+**B4: Response Delivery** (Hermes agent Mumuni only)
 
 ```bash
-ssh root@<CT> "grep -E 'Finalized|Failed to finalize|Replied to' ~/.hermes/logs/agent.log | tail -10"
+ssh root@192.168.68.24 "grep -E 'Finalized|Failed to finalize|Replied to' ~/.hermes/logs/agent.log | tail -10"
 ```
 
 > 50% fail rate → critical.
@@ -222,7 +230,7 @@ ssh root@<CT> "grep -E 'Finalized|Failed to finalize|Replied to' ~/.hermes/logs/
 
 | Condition | Action |
 |-----------|--------|
-| `zulip.state != "connected"` | Mumuni (PM2): `ssh root@<CT> "pm2 restart mumuni-zulip"`<br>Tanko (systemd): `ssh root@<CT> "hermes gateway restart"` |
+| `zulip.state != "connected"` | `ssh root@<CT> "pkill -f 'gateway run'; sleep 2; hermes gateway restart"` (Mumuni) / restart Tanko via DSH service |
 | No heartbeat in 10min | Same as above |
 | `Failed to finalize` > 50% | Check PATCH API, Zulip server |
 | Response empty/short | Check A2A endpoint / LiteLLM model |

zulip-mention-reliability.prose.md

@@ -10,7 +10,7 @@ description: >
 
 > **⚠️ RETIRED** — The pi Zulip extension (`~/.pi/agent/extensions/zulip/`) and
 > PM2 process (`abiba-zulip`) have been decommissioned. All mention/reliability
-> monitoring now happens through Telegram. Hermes agents (Tanko, Mumuni) and
+> monitoring now happens through Telegram. Agents (Mumuni on Hermes, Tanko on DSH) and
 > Agent Zero (kagentz) continue to use Zulip.
 
 ## Maintains

zulip-resilience-v3.prose.md

@@ -420,7 +420,7 @@ Backup v2 before starting: `cp index.js index.js.v2-backup-$(date +%Y%m%d-%H%M%S
 |-------|----------|-------------|--------------|-------------|
 | **Abiba** | pi (CT 100) | ✅ Connected | API key missing from Infisical injection; poll timeout noise | Added .env fallback; AbortError treated as empty poll (no retry); poll timeout 65s→90s |
 | **Tanko** | Hermes (CT 112) | ✅ Connected | Gateway disconnected since Jul 11; watchdog restart didn't re-establish Zulip | Full gateway restart (kill wrapper, let infisical-gateway.sh respawn) |
-| **Mumuni** | Hermes (CT 114) | ✅ Connected | No issues found | None needed |
+| **Mumuni** | Hermes (inside Abiba CT 100) | ✅ Connected | No issues found | None needed |
 
 ### Key Fixes Applied
 

zulip-self-heal.prose.md

@@ -13,7 +13,8 @@ triggers:
 
 > **⚠️ RETIRED** — This contract was embedded in the pi Zulip extension code
 > (`performHealthCheck()`). That code has been removed. Zulip self-healing for
-> Hermes agents (Tanko, Mumuni) continues through their own gateway monitoring.
+> agents (Mumuni on Hermes, Tanko on DSH) continues through their own platform
+> monitoring.
 
 ## Maintains
 
@@ -65,8 +66,8 @@ triggers:
 |------|----|------|---------|
 | Zulip server | 192.168.68.19 | root | Docker: `zulip-zulip-1` |
 | Abiba (pi) | localhost | root | PM2: `abiba-zulip` |
-| Mumuni | 192.168.68.123 | root | `hermes gateway restart` |
-| Tanko | 192.168.68.122 | jerome | `PATH=$PATH:/home/jerome/.hermes/hermes-agent hermes gateway restart` |
+| Mumuni | 192.168.68.24 (CT100 abiba) | root | `hermes gateway restart` |
+| Tanko | 192.168.68.122 (CT 112) | jerome | DSH (DeepSeek Harness) — restart via DSH service, not `hermes gateway restart` (no longer a Hermes agent since 2026-08-27) |
 
 ## Debounce
 
@@ -75,9 +76,8 @@ Track via `/tmp/zulip-heal-debounce-<agent>` (unix timestamp of last restart).
 
 ## Reporting
 
-Every cycle produces a knowledge graph node:
-- Title: `[LEARN] zulip-self-heal: <timestamp>`
-- metadata: { type: "remediation", status: "fixed" | "escalated" | "healthy" }
+This contract is RETIRED — health-check logs are NOT knowledge graph content.
+No graph nodes are created. Logs go to Gitea (SyslogSolution/health-logs).
 - Issues fixed → DM: "🛠 Zulip Self-Heal: fixed <issue>"
 - Issues escalated → DM: "⚠️ Zulip Self-Heal: <issue> needs attention"